main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm1061n28wx6f: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm1061n28wx6f-etched.glb Publish 0.1.0 · Ray
stm1061n28wx6f-etched.step stm1061n28wx6f: factory component page (tier=mfr) · Ray
stm1061n28wx6f-hero.glb stm1061n28wx6f: hero GLB from the etched model (keeps the MPN mark) · Ray
stm1061n28wx6f-hero.overlay.json Publish 0.1.0 · Ray
stm1061n28wx6f.glb Publish 0.1.0 · Ray
stm1061n28wx6f.kicad_mod Publish 0.1.0 · Ray
stm1061n28wx6f.kicad_sym Publish 0.1.0 · Ray
stm1061n28wx6f.lbr Publish 0.1.0 · Ray
stm1061n28wx6f.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

STM1061N28WX6F

STMicroelectronics · Supervisor And Reset ICs · SOT-23-3

STM1061N28WX6F from STMicroelectronics, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Active-low open drain output that goes low when VCC drops below VTH- and stays low until VCC rises above VTH+ (VTH- + VHYST), so a pull-up resistor to any supply up to 6V is required.
2 VSS power_in Ground, the reference for the power supply, which must be connected to the system ground.
3 VCC power_in Supply voltage and input for the voltage detector, specified for 0.7 V to 6.0 V operation.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-3
Category Power Management (PMIC)
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Operating Voltage VCC 0.7 6 V 16
VCC Supply Voltage (Measurement Conditions) VCC 0.7 6 V 14
Ambient Operating Temperature TA -40 85 °C 14
Detect Voltage VTH- (suffix 28) VTH- 2.744 2.8 2.856 V TA = 25°C, suffix 28 (Table 9) 21
VCC Supply Current ICC 0.9 3 µA VCC = 3.0V, no load 16
VCC Supply Current ICC 1.1 3.6 µA VCC = 5.5V, no load 16
Output Current, N-channel IOUT 1 1.7 mA VDS = 0.5V, reset asserted, VCC = 1.0V 16
Output Current, N-channel IOUT 3 14 mA VDS = 0.5V, reset asserted, VCC = 2.0V 16
Output Current, N-channel IOUT 5 22 mA VDS = 0.5V, reset asserted, VCC = 3.0V 16
Output Current, N-channel IOUT 6 26 mA VDS = 0.5V, reset asserted, VCC = 4.0V 16
Output Current, N-channel IOUT 7 30 mA VDS = 0.5V, reset asserted, VCC = 5.0V 16
VCC to OUT Detect Delay tPD 25 µs VCC falling from VTH- + 100mV to VTH-, 100mV at 10mV/µs 16
VCC to OUT Release Delay tPR 30 200 µs VCC rising from VTH+, 100mV to VTH+ + 100mV at 10mV/µs 16
Threshold Temperature Coefficient -100 100 ppm/°C 16
Storage Temperature (VCC Off, VBAT Off) TSTG -55 150 °C VCC off, VBAT off 13
Lead Solder Temperature TSLD 260 °C for 10 seconds 13
Input or Output Voltage VIO -0.3 V VCC + 0.3 upper limit printed as expression 13
Supply Voltage VCC -0.3 7 V 13
Output Current IO 20 mA 13
Power Dissipation PD 320 mW 13

CAD (KiCad official)

  • Symbol: STM1061N28WX6F
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0050000000000001 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm1061n28wx6f-etched.step / stm1061n28wx6f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm1061n28wx6f.step / stm1061n28wx6f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (23 pp, sha256 5b1838531083a3d9, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF