Generated by kicad-footprint-generator · KiCad file format 20260206
STCS1PHR
STMicroelectronics · LED Drivers · SOIC-8-EP
STCS1PHR from STMicroelectronics, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input, operating range 4.5 V to 40 V (absolute maximum -0.3 to +45 V). |
| 2 | PWM | input | PWM dimming input; high turns the main switch on, low turns it off, with typical frequency from a few hertz to 50 kHz. |
| 3 | EN | input | Shutdown pin; when low the device is completely off and consumption drops below 1 µA. |
| 4 | DRAIN | passive | Internal N-MOSFET drain, absolute maximum -0.3 to +45 V, connected to the LED string. |
| 5 | FB | input | Feedback input regulated to 100 mV nominal average; connect the LED cathode and a current-setting resistor to ground here. |
| 6 | GND | power_in | Ground. |
| 7 | N.C. | unconnected | Not connected; it is mandatory to leave this pin floating for proper operation. |
| 8 | DISC | output | Open-drain load disconnection flag, pulled low when VDRAIN is below 75 mV; low-level 0.5 V max at 5 mA sink. |
| 9 | Exp-pad | power_in | Exposed pad, internally connected to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8-EP |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 4.5 | 40 | V | 6 | ||
| Output current range | IO | 1 | 1500 | mA | 6 | ||
| Feedback voltage | VFB | 90 | 100 | 110 | mV | IO = 0 to 1.5A | 6 |
| Regulation (percentage with respect to VCC=12V) | -1 | 1 | % | VCC = 4.5 to 40 V, IO = 100 mA; VDRAIN = 1 V | 6 | ||
| Output current | IO | 500 | mA | RFB = 0.2 Ω | 6 | ||
| Quiescent current, On Mode | ICC | 450 | 750 | µA | On Mode | 6 | |
| Quiescent current, Shutdown | ICC | 1 | µA | Shutdown Mode; VCC = 5 to 12V | 6 | ||
| Quiescent current, Shutdown | ICC | 3 | µA | Shutdown Mode; VCC = 12 to 40V | 6 | ||
| Dropout voltage | VDROP | 0.12 | 0.16 | V | IO = 100 mA | 6 | |
| Dropout voltage | VDROP | 0.58 | 0.9 | V | IO = 1.5 A | 6 | |
| Drain leakage current | LEAKDRAIN | 10 | µA | Shutdown; VDRAIN = 40 V | 6 | ||
| DISC low level voltage | 0.2 | 0.5 | V | ISINK = 5 mA | 6 | ||
| DISC leakage current | 1 | µA | VDISC = 5 V | 6 | |||
| Load disconnection threshold DISC Turn-ON | 75 | mV | DISC Turn-ON | 6 | |||
| Load disconnection threshold DISC Turn-OFF | 110 | mV | DISC Turn-OFF | 6 | |||
| Input low level | VL | 0.4 | V | Logic inputs (PWM and EN) | 6 | ||
| Input high level | VH | 1.2 | V | Logic inputs (PWM and EN) | 6 | ||
| EN input leakage current | 60 | µA | VEN = 40 V | 6 | |||
| PWM input leakage current | 120 | µA | VPWM = 40 V | 6 | |||
| EN, PWM leakage current | 2 | µA | VEN = 5 V; VPWM = 5 V | 6 | |||
| Delay on PWM signal, rising | TD | 3 | µs | VPWM rising, VCC = 12 V | 6 | ||
| Delay on PWM signal, falling | TD | 1.2 | µs | VPWM falling, VCC = 12 V | 6 | ||
| Thermal shutdown temperature | 155 | °C | 6 | ||||
| Thermal shutdown hysteresis | 25 | °C | 6 | ||||
| DC supply voltage | VCC | -0.3 | 45 | V | 5 | ||
| Drain pin voltage | DRAIN | -0.3 | 45 | V | 5 | ||
| Logic pins voltage (PWM, EN, DISC) | -0.3 | V | -0.3 to + VCC + 0.3 V | 5 | |||
| Configuration pin voltage (FB) | FB | -0.3 | 3.3 | V | 5 | ||
| ESD Human body model | ESD | -2 | 2 | kV | all pins | 5 | |
| Junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 5 | ||
| Thermal resistance junction-case, PowerSO-8 | RthJC | 12 | °C/W | PowerSO-8 | 5 | ||
| Thermal resistance junction-ambient, PowerSO-8 | RthJA | 45 | °C/W | PowerSO-8; two sides, two planes PCB, EIA/JEDEC JESD51-7 | 5 |
CAD (KiCad official)
- Symbol:
STCS1PHR - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
stcs1phr-etched.step/stcs1phr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stcs1phr.step/stcs1phr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (17 pp, sha256
3734f031ca3f7e88, retrieved 2026-10-24, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).