main
Ray Publish 0.1.0 1018c95
{
  "slug": "stcs1phr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics LED Drivers, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "display modules - led drivers - display drivers",
    "stcs1phr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stcs1phr.kicad_sym",
    "stcs1phr.kicad_mod",
    "stcs1phr.glb",
    "stcs1phr.step",
    "stcs1phr.lbr",
    "docs/hero.png",
    "docs/stcs1phr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stcs1phr-hero.glb",
    "stcs1phr-hero.overlay.json",
    "stcs1phr-etched.glb"
  ],
  "component": {
    "mpn": "STCS1PHR",
    "manufacturer": "STMicroelectronics",
    "package": "SOIC-8-EP",
    "pin_count": 9,
    "category": "Display Modules / LED Drivers / Display Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.st.com/resource/en/datasheet/stcs1phr.pdf",
    "parts": {
      "symbol": "stcs1phr.kicad_sym",
      "footprint": "stcs1phr.kicad_mod",
      "model_3d": "stcs1phr-hero.glb",
      "model_3d_plain": "stcs1phr-etched.glb",
      "model_3d_step": "stcs1phr-etched.step",
      "model_3d_step_plain": "stcs1phr.step",
      "lbr": "stcs1phr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2678538",
      "digikey": "497-5961-2-ND",
      "mouser": "511-STCS1PHR"
    },
    "distributor_check": {
      "checked_at": "2026-10-24T00:06:50Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-5961-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-STCS1PHR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input, operating range 4.5 V to 40 V (absolute maximum -0.3 to +45 V)."
      },
      {
        "number": "2",
        "name": "PWM",
        "type": "input",
        "description": "PWM dimming input; high turns the main switch on, low turns it off, with typical frequency from a few hertz to 50 kHz."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Shutdown pin; when low the device is completely off and consumption drops below 1 µA."
      },
      {
        "number": "4",
        "name": "DRAIN",
        "type": "passive",
        "description": "Internal N-MOSFET drain, absolute maximum -0.3 to +45 V, connected to the LED string."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input regulated to 100 mV nominal average; connect the LED cathode and a current-setting resistor to ground here."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "7",
        "name": "N.C.",
        "type": "unconnected",
        "description": "Not connected; it is mandatory to leave this pin floating for proper operation."
      },
      {
        "number": "8",
        "name": "DISC",
        "type": "output",
        "description": "Open-drain load disconnection flag, pulled low when VDRAIN is below 75 mV; low-level 0.5 V max at 5 mA sink."
      },
      {
        "number": "9",
        "name": "Exp-pad",
        "type": "power_in",
        "description": "Exposed pad, internally connected to ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet names the package PowerSO-8 (with exposed pad), not 'SOIC-8-EP'; STCS1PHR is the PowerSO-8; DRAIN type chosen as passive (current-sink MOSFET drain); datasheet gives no ERC class."
        ],
        "pages_sent": 17,
        "cost_usd": 0.0944,
        "at": "2026-10-24T00:06:19"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/stcs1phr.pdf",
        "pages": 17,
        "sha256": "3734f031ca3f7e88",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stcs1phr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-24",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stcs1phr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "372f51d312031274b464e5ef2f3473211cb57ca63605c05ec14f484098099570",
        "checked": "2026-10-24",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}