main
History Download
Ray Publish 0.1.0 1018c95

STCS1PHR

STMicroelectronics · LED Drivers · SOIC-8-EP

STCS1PHR from STMicroelectronics, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage input, operating range 4.5 V to 40 V (absolute maximum -0.3 to +45 V).
2 PWM input PWM dimming input; high turns the main switch on, low turns it off, with typical frequency from a few hertz to 50 kHz.
3 EN input Shutdown pin; when low the device is completely off and consumption drops below 1 µA.
4 DRAIN passive Internal N-MOSFET drain, absolute maximum -0.3 to +45 V, connected to the LED string.
5 FB input Feedback input regulated to 100 mV nominal average; connect the LED cathode and a current-setting resistor to ground here.
6 GND power_in Ground.
7 N.C. unconnected Not connected; it is mandatory to leave this pin floating for proper operation.
8 DISC output Open-drain load disconnection flag, pulled low when VDRAIN is below 75 mV; low-level 0.5 V max at 5 mA sink.
9 Exp-pad power_in Exposed pad, internally connected to ground.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8-EP
Category Display Modules / LED Drivers / Display Drivers
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC 4.5 40 V 6
Output current range IO 1 1500 mA 6
Feedback voltage VFB 90 100 110 mV IO = 0 to 1.5A 6
Regulation (percentage with respect to VCC=12V) -1 1 % VCC = 4.5 to 40 V, IO = 100 mA; VDRAIN = 1 V 6
Output current IO 500 mA RFB = 0.2 Ω 6
Quiescent current, On Mode ICC 450 750 µA On Mode 6
Quiescent current, Shutdown ICC 1 µA Shutdown Mode; VCC = 5 to 12V 6
Quiescent current, Shutdown ICC 3 µA Shutdown Mode; VCC = 12 to 40V 6
Dropout voltage VDROP 0.12 0.16 V IO = 100 mA 6
Dropout voltage VDROP 0.58 0.9 V IO = 1.5 A 6
Drain leakage current LEAKDRAIN 10 µA Shutdown; VDRAIN = 40 V 6
DISC low level voltage 0.2 0.5 V ISINK = 5 mA 6
DISC leakage current 1 µA VDISC = 5 V 6
Load disconnection threshold DISC Turn-ON 75 mV DISC Turn-ON 6
Load disconnection threshold DISC Turn-OFF 110 mV DISC Turn-OFF 6
Input low level VL 0.4 V Logic inputs (PWM and EN) 6
Input high level VH 1.2 V Logic inputs (PWM and EN) 6
EN input leakage current 60 µA VEN = 40 V 6
PWM input leakage current 120 µA VPWM = 40 V 6
EN, PWM leakage current 2 µA VEN = 5 V; VPWM = 5 V 6
Delay on PWM signal, rising TD 3 µs VPWM rising, VCC = 12 V 6
Delay on PWM signal, falling TD 1.2 µs VPWM falling, VCC = 12 V 6
Thermal shutdown temperature 155 °C 6
Thermal shutdown hysteresis 25 °C 6
DC supply voltage VCC -0.3 45 V 5
Drain pin voltage DRAIN -0.3 45 V 5
Logic pins voltage (PWM, EN, DISC) -0.3 V -0.3 to + VCC + 0.3 V 5
Configuration pin voltage (FB) FB -0.3 3.3 V 5
ESD Human body model ESD -2 2 kV all pins 5
Junction temperature TJ -40 150 °C 5
Storage temperature range TSTG -55 150 °C 5
Thermal resistance junction-case, PowerSO-8 RthJC 12 °C/W PowerSO-8 5
Thermal resistance junction-ambient, PowerSO-8 RthJA 45 °C/W PowerSO-8; two sides, two planes PCB, EIA/JEDEC JESD51-7 5

CAD (KiCad official)

  • Symbol: STCS1PHR
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: stcs1phr-etched.step / stcs1phr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stcs1phr.step / stcs1phr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (17 pp, sha256 3734f031ca3f7e88, retrieved 2026-10-24, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF