main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers st16c2550iq48-f: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
st16c2550iq48-f-etched.glb st16c2550iq48-f: factory component page (tier=mfr) · Ray
st16c2550iq48-f-etched.step st16c2550iq48-f: factory component page (tier=mfr) · Ray
st16c2550iq48-f-hero.glb st16c2550iq48-f: hero GLB from the etched model (keeps the MPN mark) · Ray
st16c2550iq48-f-hero.overlay.json st16c2550iq48-f: hero GLB from the etched model (keeps the MPN mark) · Ray
st16c2550iq48-f.glb Publish 0.1.0 · Ray
st16c2550iq48-f.kicad_mod Publish 0.1.0 · Ray
st16c2550iq48-f.kicad_sym Publish 0.1.0 · Ray
st16c2550iq48-f.lbr Publish 0.1.0 · Ray
st16c2550iq48-f.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 48 pins · Ray

ST16C2550IQ48-F

MaxLinear · UART · TQFP-48(7x7)

ST16C2550IQ48-F from MaxLinear, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D5 bidirectional Data bus line bit 5; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers.
2 D6 bidirectional Data bus line bit 6; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers.
3 D7 bidirectional Data bus line bit 7; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers.
4 RXB input UART channel B Receive Data; normal receive data input must idle at logic 1, and if unused it should be tied to VCC or pulled high via a 100k ohm resistor.
5 RXA input UART channel A Receive Data; normal receive data input must idle at logic 1, and if unused it should be tied to VCC or pulled high via a 100k ohm resistor.
6 TXRDYB# output UART channel B Transmitter Ready (active low) that provides the TX FIFO/THR status per Table 2; leave unconnected if not used.
7 TXA output UART channel A Transmit Data output; leave unconnected if not used.
8 TXB output UART channel B Transmit Data output; leave unconnected if not used.
9 OP2B# output Output Port 2 channel B, set by the user through MCR[3]; it goes to logic 0 with INTB active when MCR[3] is 1 and must not be used as a general output because it disturbs INTB.
10 CSA# input UART channel A select (active low) that enables channel A for data bus operation.
11 CSB# input UART channel B select (active low) that enables channel B for data bus operation.
12 NC unconnected No connection; the pin is open but should typically be connected to GND for good design practice.
13 XTAL1 input Crystal or external clock input.
14 XTAL2 output Crystal or buffered clock output.
15 IOW# input Input/Output Write Strobe (active low); the falling edge starts an internal write cycle and the rising edge transfers the data byte on the data bus to the addressed register.
16 CDB# input UART channel B Carrier-Detect (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART.
17 GND power_in Power supply common, ground.
18 RXRDYB# output UART channel B Receiver Ready (active low) that provides the RX FIFO/RHR status per Table 2; leave unconnected if not used.
19 IOR# input Input/Output Read Strobe (active low); the falling edge starts an internal read cycle and the data byte is placed on the data bus for the host to read on the rising edge.
20 DSRB# input UART channel B Data-Set-Ready (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART.
21 RIB# input UART channel B Ring-Indicator (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART.
22 RTSB# output UART channel B Request-to-Send (active low) or general purpose output; leave unconnected if not used.
23 CTSB# input UART channel B Clear-to-Send (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART.
24 NC unconnected No connection; the pin is open but should typically be connected to GND for good design practice.
25 NC unconnected No connection; the pin is open but should typically be connected to GND for good design practice.
26 A2 input Address data line bit 2 of A2:A0, which selects one of the internal registers in UART channel A/B during a data bus transaction.
27 A1 input Address data line bit 1 of A2:A0, which selects one of the internal registers in UART channel A/B during a data bus transaction.
28 A0 input Address data line bit 0 of A2:A0, which selects one of the internal registers in UART channel A/B during a data bus transaction.
29 INTB output UART channel B Interrupt output; it is active when MCR[3] is set to 1 and three-state when MCR[3] is 0 (default), with OP2B# following the same state.
30 INTA output UART channel A Interrupt output; it is active when MCR[3] is set to 1 and three-state when MCR[3] is 0 (default), with OP2A# following the same state.
31 RXRDYA# output UART channel A Receiver Ready (active low) that provides the RX FIFO/RHR status per Table 2; leave unconnected if not used.
32 OP2A# output Output Port 2 channel A, set by the user through MCR[3]; it must not be used as a general output because it disturbs the INTA output functionality.
33 RTSA# output UART channel A Request-to-Send (active low) or general purpose output; leave unconnected if not used.
34 DTRA# output UART channel A Data-Terminal-Ready (active low) or general purpose output; leave unconnected if not used.
35 DTRB# output UART channel B Data-Terminal-Ready (active low) or general purpose output; leave unconnected if not used.
36 RESET input Reset (active high); a logic 1 pulse longer than 40 ns resets the internal registers and all outputs, with the UART transmitter output held at logic 1 during reset.
37 NC unconnected No connection; the pin is open but should typically be connected to GND for good design practice.
38 CTSA# input UART channel A Clear-to-Send (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART.
39 DSRA# input UART channel A Data-Set-Ready (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART.
40 CDA# input UART channel A Carrier-Detect (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART.
41 RIA# input UART channel A Ring-Indicator (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART.
42 VCC power_in Power supply, 2.97V to 5.5V; all inputs are 5V tolerant for devices with top marking "A2 YYWW" and newer.
43 TXRDYA# output UART channel A Transmitter Ready (active low) that provides the TX FIFO/THR status per Table 2; leave unconnected if not used.
44 D0 bidirectional Data bus line bit 0; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers.
45 D1 bidirectional Data bus line bit 1; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers.
46 D2 bidirectional Data bus line bit 2; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers.
47 D3 bidirectional Data bus line bit 3; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers.
48 D4 bidirectional Data bus line bit 4; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers.

Key specifications

Parameter Value
Manufacturer MaxLinear
Package TQFP-48(7x7)
Category Interface ICs
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Range 7 V 26
Voltage at Any Pin -0.3 5.5 V min printed as GND-0.3 V 26
Operating Temperature -40 85 °C industrial grade 26
Storage Temperature -65 150 °C 26
Package Dissipation 500 mW 26
Power supply voltage VCC 2.97 5.5 V pin description: 2.97V to 5.5V power supply 4
Clock Input Low Level VILCK -0.3 0.6 V VCC = 3.3V ±10% column 26
Clock Input Low Level VILCK -0.5 0.6 V VCC = 5.0V ±10% column 26
Clock Input High Level VIHCK 2.4 5.5 V VCC = 3.3V ±10% column 26
Clock Input High Level VIHCK 3 5.5 V VCC = 5.0V ±10% column 26
Input Low Voltage VIL -0.3 0.8 V VCC = 3.3V ±10% column 26
Input Low Voltage VIL -0.5 0.8 V VCC = 5.0V ±10% column 26
Input High Voltage VIH 2 5.5 V VCC = 3.3V ±10% column 26
Input High Voltage VIH 2.2 5.5 V VCC = 5.0V ±10% column 26
Output Low Voltage VOL 0.4 V IOL = 6 mA; VCC = 3.3V ±10% column 26
Output High Voltage VOH 2 V IOL = 4 mA (as printed); VCC = 3.3V ±10% column 26
Output High Voltage VOH 2.4 V IOL = 4 mA (as printed); VCC = 5.0V ±10% column 26
Input Low Leakage Current IIL -10 10 uA IOH = -6 mA (as printed); VCC = 3.3V ±10% column 26
Input High Leakage Current IIH -10 10 uA IOH = -1 mA (as printed); VCC = 3.3V ±10% column 26
Input Pin Capacitance CIN 5 pF 26
Power Supply Current ICC 1.3 mA VCC = 3.3V ±10% column 26
Power Supply Current ICC 3 mA VCC = 5.0V ±10% column 26
External Clock Frequency OSC 30 MHz VCC = 3.3V ±10% column; 70 pF load where applicable 27
External Clock Frequency OSC 64 MHz VCC = 5.0V ±10% column; 70 pF load where applicable 27
Clock Pulse Duration CLK 17 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
Clock Pulse Duration CLK 8 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
Chip Select Width TCS 70 ns VCC = 3.3V ±10% column; *55 ns if VCC = 3.3V +10%/-5% and TA = 0 to 70°C (See Figure 12); 70 pF load where applicable 27
Chip Select Width TCS 40 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
IOR# Strobe Width TRD 70 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
IOR# Strobe Width TRD 40 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
Read or Write Cycle Delay TDY 70 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
Read or Write Cycle Delay TDY 40 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
Data Access Time TRDV 35 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
Data Access Time TRDV 25 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
Data Disable Time TDD 0 25 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
Data Disable Time TDD 0 15 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
IOW# Strobe Width TWR 40 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
IOW# Strobe Width TWR 25 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
Data Setup Time TDS 20 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
Data Setup Time TDS 15 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
Data Hold Time TDH 5 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
Delay From IOW# To Output TWDO 50 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
Delay From IOW# To Output TWDO 40 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
Delay From Initial INT Reset To Transmit Start TINT 8 24 Bclk VCC = 3.3V ±10% column; 70 pF load where applicable 27
Address Setup Time TAS 5 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
Address Setup Time TAS 0 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
Address Hold Time TAH 10 ns VCC = 3.3V ±10% column; 70 pF load where applicable 27
Address Hold Time TAH 5 ns VCC = 5.0V ±10% column; 70 pF load where applicable 27
Reset Pulse Width TRST 40 ns VCC = 3.3V ±10% column; 70 pF load where applicable 28
Delay From Stop To Set Interrupt TSSI 1 Bclk VCC = 3.3V ±10% column; 70 pF load where applicable 27
Thermal Resistance theta-ja (48-TQFP) theta-ja 59 °C/W 48-TQFP; margin of error ±15% 26
Thermal Resistance theta-jc (48-TQFP) theta-jc 16 °C/W 48-TQFP; margin of error ±15% 26

CAD (KiCad official)

  • Symbol: ST16C2550IQ48-F
  • Footprint: Package_QFP:TQFP-48_7x7mm_P0.5mm
  • 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: st16c2550iq48-f-etched.step / st16c2550iq48-f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); st16c2550iq48-f.step / st16c2550iq48-f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (37 pp, sha256 bbe966b40d1dfcc5, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF