main
Ray Publish 0.1.0 671e776
{
  "slug": "st16c2550iq48-f",
  "version": "0.1.0",
  "type": "component",
  "description": "MaxLinear UART, TQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "st16c2550iq48-f",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "st16c2550iq48-f.kicad_sym",
    "st16c2550iq48-f.kicad_mod",
    "st16c2550iq48-f.glb",
    "st16c2550iq48-f.step",
    "st16c2550iq48-f.lbr",
    "docs/hero.png",
    "docs/st16c2550iq48-f-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "st16c2550iq48-f-hero.glb",
    "st16c2550iq48-f-hero.overlay.json"
  ],
  "component": {
    "mpn": "ST16C2550IQ48-F",
    "manufacturer": "MaxLinear",
    "package": "TQFP-48(7x7)",
    "pin_count": 48,
    "category": "Interface ICs",
    "subcategory": "UART",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/7823321cc1430c58da727b30950bd2ac.pdf",
    "parts": {
      "symbol": "st16c2550iq48-f.kicad_sym",
      "footprint": "st16c2550iq48-f.kicad_mod",
      "model_3d": "st16c2550iq48-f-hero.glb",
      "model_3d_plain": "st16c2550iq48-f.glb",
      "model_3d_step": "st16c2550iq48-f-etched.step",
      "model_3d_step_plain": "st16c2550iq48-f.step",
      "lbr": "st16c2550iq48-f.lbr"
    },
    "distributor_links": {
      "lcsc": "C1519118",
      "digikey": "1016-1256-ND",
      "mouser": "701-ST16C2550IQ48-F"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T19:05:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1016-1256-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "701-ST16C2550IQ48-F",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "D5",
        "type": "bidirectional",
        "description": "Data bus line bit 5; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers."
      },
      {
        "number": "2",
        "name": "D6",
        "type": "bidirectional",
        "description": "Data bus line bit 6; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers."
      },
      {
        "number": "3",
        "name": "D7",
        "type": "bidirectional",
        "description": "Data bus line bit 7; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers."
      },
      {
        "number": "4",
        "name": "RXB",
        "type": "input",
        "description": "UART channel B Receive Data; normal receive data input must idle at logic 1, and if unused it should be tied to VCC or pulled high via a 100k ohm resistor."
      },
      {
        "number": "5",
        "name": "RXA",
        "type": "input",
        "description": "UART channel A Receive Data; normal receive data input must idle at logic 1, and if unused it should be tied to VCC or pulled high via a 100k ohm resistor."
      },
      {
        "number": "6",
        "name": "TXRDYB#",
        "type": "output",
        "description": "UART channel B Transmitter Ready (active low) that provides the TX FIFO/THR status per Table 2; leave unconnected if not used."
      },
      {
        "number": "7",
        "name": "TXA",
        "type": "output",
        "description": "UART channel A Transmit Data output; leave unconnected if not used."
      },
      {
        "number": "8",
        "name": "TXB",
        "type": "output",
        "description": "UART channel B Transmit Data output; leave unconnected if not used."
      },
      {
        "number": "9",
        "name": "OP2B#",
        "type": "output",
        "description": "Output Port 2 channel B, set by the user through MCR[3]; it goes to logic 0 with INTB active when MCR[3] is 1 and must not be used as a general output because it disturbs INTB."
      },
      {
        "number": "10",
        "name": "CSA#",
        "type": "input",
        "description": "UART channel A select (active low) that enables channel A for data bus operation."
      },
      {
        "number": "11",
        "name": "CSB#",
        "type": "input",
        "description": "UART channel B select (active low) that enables channel B for data bus operation."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the pin is open but should typically be connected to GND for good design practice."
      },
      {
        "number": "13",
        "name": "XTAL1",
        "type": "input",
        "description": "Crystal or external clock input."
      },
      {
        "number": "14",
        "name": "XTAL2",
        "type": "output",
        "description": "Crystal or buffered clock output."
      },
      {
        "number": "15",
        "name": "IOW#",
        "type": "input",
        "description": "Input/Output Write Strobe (active low); the falling edge starts an internal write cycle and the rising edge transfers the data byte on the data bus to the addressed register."
      },
      {
        "number": "16",
        "name": "CDB#",
        "type": "input",
        "description": "UART channel B Carrier-Detect (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART."
      },
      {
        "number": "17",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply common, ground."
      },
      {
        "number": "18",
        "name": "RXRDYB#",
        "type": "output",
        "description": "UART channel B Receiver Ready (active low) that provides the RX FIFO/RHR status per Table 2; leave unconnected if not used."
      },
      {
        "number": "19",
        "name": "IOR#",
        "type": "input",
        "description": "Input/Output Read Strobe (active low); the falling edge starts an internal read cycle and the data byte is placed on the data bus for the host to read on the rising edge."
      },
      {
        "number": "20",
        "name": "DSRB#",
        "type": "input",
        "description": "UART channel B Data-Set-Ready (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART."
      },
      {
        "number": "21",
        "name": "RIB#",
        "type": "input",
        "description": "UART channel B Ring-Indicator (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART."
      },
      {
        "number": "22",
        "name": "RTSB#",
        "type": "output",
        "description": "UART channel B Request-to-Send (active low) or general purpose output; leave unconnected if not used."
      },
      {
        "number": "23",
        "name": "CTSB#",
        "type": "input",
        "description": "UART channel B Clear-to-Send (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART."
      },
      {
        "number": "24",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the pin is open but should typically be connected to GND for good design practice."
      },
      {
        "number": "25",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the pin is open but should typically be connected to GND for good design practice."
      },
      {
        "number": "26",
        "name": "A2",
        "type": "input",
        "description": "Address data line bit 2 of A2:A0, which selects one of the internal registers in UART channel A/B during a data bus transaction."
      },
      {
        "number": "27",
        "name": "A1",
        "type": "input",
        "description": "Address data line bit 1 of A2:A0, which selects one of the internal registers in UART channel A/B during a data bus transaction."
      },
      {
        "number": "28",
        "name": "A0",
        "type": "input",
        "description": "Address data line bit 0 of A2:A0, which selects one of the internal registers in UART channel A/B during a data bus transaction."
      },
      {
        "number": "29",
        "name": "INTB",
        "type": "output",
        "description": "UART channel B Interrupt output; it is active when MCR[3] is set to 1 and three-state when MCR[3] is 0 (default), with OP2B# following the same state."
      },
      {
        "number": "30",
        "name": "INTA",
        "type": "output",
        "description": "UART channel A Interrupt output; it is active when MCR[3] is set to 1 and three-state when MCR[3] is 0 (default), with OP2A# following the same state."
      },
      {
        "number": "31",
        "name": "RXRDYA#",
        "type": "output",
        "description": "UART channel A Receiver Ready (active low) that provides the RX FIFO/RHR status per Table 2; leave unconnected if not used."
      },
      {
        "number": "32",
        "name": "OP2A#",
        "type": "output",
        "description": "Output Port 2 channel A, set by the user through MCR[3]; it must not be used as a general output because it disturbs the INTA output functionality."
      },
      {
        "number": "33",
        "name": "RTSA#",
        "type": "output",
        "description": "UART channel A Request-to-Send (active low) or general purpose output; leave unconnected if not used."
      },
      {
        "number": "34",
        "name": "DTRA#",
        "type": "output",
        "description": "UART channel A Data-Terminal-Ready (active low) or general purpose output; leave unconnected if not used."
      },
      {
        "number": "35",
        "name": "DTRB#",
        "type": "output",
        "description": "UART channel B Data-Terminal-Ready (active low) or general purpose output; leave unconnected if not used."
      },
      {
        "number": "36",
        "name": "RESET",
        "type": "input",
        "description": "Reset (active high); a logic 1 pulse longer than 40 ns resets the internal registers and all outputs, with the UART transmitter output held at logic 1 during reset."
      },
      {
        "number": "37",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; the pin is open but should typically be connected to GND for good design practice."
      },
      {
        "number": "38",
        "name": "CTSA#",
        "type": "input",
        "description": "UART channel A Clear-to-Send (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART."
      },
      {
        "number": "39",
        "name": "DSRA#",
        "type": "input",
        "description": "UART channel A Data-Set-Ready (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART."
      },
      {
        "number": "40",
        "name": "CDA#",
        "type": "input",
        "description": "UART channel A Carrier-Detect (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART."
      },
      {
        "number": "41",
        "name": "RIA#",
        "type": "input",
        "description": "UART channel A Ring-Indicator (active low) or general purpose input; it should be connected to VCC when not used and has no effect on the UART."
      },
      {
        "number": "42",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply, 2.97V to 5.5V; all inputs are 5V tolerant for devices with top marking \"A2 YYWW\" and newer."
      },
      {
        "number": "43",
        "name": "TXRDYA#",
        "type": "output",
        "description": "UART channel A Transmitter Ready (active low) that provides the TX FIFO/THR status per Table 2; leave unconnected if not used."
      },
      {
        "number": "44",
        "name": "D0",
        "type": "bidirectional",
        "description": "Data bus line bit 0; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers."
      },
      {
        "number": "45",
        "name": "D1",
        "type": "bidirectional",
        "description": "Data bus line bit 1; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers."
      },
      {
        "number": "46",
        "name": "D2",
        "type": "bidirectional",
        "description": "Data bus line bit 2; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers."
      },
      {
        "number": "47",
        "name": "D3",
        "type": "bidirectional",
        "description": "Data bus line bit 3; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers."
      },
      {
        "number": "48",
        "name": "D4",
        "type": "bidirectional",
        "description": "Data bus line bit 4; the data bus lines [7:0] are bidirectional and transfer data to and from the UART registers."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The 48-TQFP pin numbers were taken from the pin description table (pages 4-6), where each signal lis; The A2:A0 row in the pin table is a grouped cell where the TQFP numbers were read as 26, 27, 28 in A; The datasheet defines 5V-tolerant inputs only for devices with top marking 'A2 YYWW' and newer. Devi"
        ],
        "pages_sent": 9,
        "cost_usd": 0.1804,
        "at": "2026-11-13T19:05:49"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/7823321cc1430c58da727b30950bd2ac.pdf",
        "pages": 37,
        "sha256": "bbe966b40d1dfcc5",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "st16c2550iq48-f.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "14ca7676e4932e92f0eca0c6d56ce3018cd28a2531204a70ab7bbacb3eeb3cf5",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "st16c2550iq48-f-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3cf06c4b1a98e565f2a053adc8733eef2b819427e3846758974cdd211f459d8e",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "48 PIN TQFP - 7 X 7 X 1 mm",
      "source_page": 34,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "E": {
        "nom_mm": 9.0,
        "range_mm": [
          8.8,
          9.2
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          1.0,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "st16c2550iq48-f.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}