Generated by kicad-footprint-generator · KiCad file format 20260206
SR086SG-G
Microchip Tech · AC-DC Controllers & Regulators · SOIC-8
SR086SG-G from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Rectified AC input voltage; the transient protector must be placed before the bridge rectifier to minimize capacitance so the rectified AC can fall below VOUT. |
| 2 | EN | input | Active low enable input (logic-level), used to disable the regulator, for example when used as a keep-alive supply; VEN(ON) minimum is 0.2V and VEN(OFF) maximum is 0.75 VREG. |
| 3 | GND | power_in | Circuit ground, which will be at the AC line potential; voltages are referenced to this pin. |
| 4 | VREG | power_out | Regulated output voltage fixed at 3.3V for SR086 (5V for SR087), supplied by a linear regulator from VOUT that needs at least 4V of headroom (VOUT-VREG ≥ 4V). |
| 5 | FB | input | Feedback input; feedback voltage with gate off is 1.18V to 1.31V (typ. 1.25V), with absolute maximum of -0.3V to 6.5V. |
| 6 | VOUT | power_out | Main output voltage, adjustable from 9V to 50V by the feedback divider, with absolute maximum of 56V. |
| 7 | VGD | power_out | Gate drive supply referenced to VOUT, specified at 11V to 15V (typ. 13V), with a diode drop of 1V maximum at 20 mA. |
| 8 | GATE | output | Drives the external IGBT pass transistor; gate output high is 11V to 15V and gate output low is 0.5V maximum, both referenced to VOUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 9 | 50 | V | 4 | ||
| Load on VOUT, including Feedback Divider and Load on VREG | IOUT | 100 | µA | 4 | |||
| Headroom for Internal Linear Regulation (VOUT-VREG) | VHR | 4 | V | 4 | |||
| Output Voltage, absolute maximum | VOUT | -0.3 | 56 | V | 4 | ||
| Feedback Voltage, absolute maximum | VFB | -0.3 | 6.5 | V | 4 | ||
| Enable Voltage, absolute maximum | VEN | -0.3 | 6.5 | V | 4 | ||
| Operating Junction Temperature, absolute maximum | TJ | -40 | 125 | °C | 4 | ||
| Current Consumption at VGD | IGD | 60 | µA | 4 | |||
| Current Consumption of the Lower Circuitry | IOUT(INT) | 400 | µA | VOUT = 9V-50V | 4 | ||
| Gate Drive Supply Voltage | VGD | 11 | 13 | 15 | V | Note 1: Referenced to VOUT | 4 |
| Gate Output High Voltage | VGATE(HI) | 11 | 15 | V | Note 1: Referenced to VOUT | 4 | |
| Gate Output Low Voltage | VGATE(LO) | 0.5 | V | Note 1: Referenced to VOUT | 4 | ||
| Feedback Voltage (Gate Off) | VFB(OFF) | 1.18 | 1.25 | 1.31 | V | 4 | |
| Feedback Voltage (Hysteresis) | VFB(HYST) | 50 | mV | 4 | |||
| Feedback Input Current | IFB | 500 | nA | 4 | |||
| VIN Trip Voltage (Gate On) | VTRIP(ON) | 0 | 3 | V | Note 1: Referenced to VOUT | 4 | |
| VIN Trip Voltage (Gate Off) | VTRIP(OFF) | 9 | 15 | V | Note 1: Referenced to VOUT | 4 | |
| Enable Voltage, On | VEN(ON) | 0.2 | V | 4 | |||
| Enable Voltage, Off | VEN(OFF) | 0.75 | VREG | 4 | |||
| VIN Gate Turn-on Delay | tDIG(ON) | 0 | 1 | µs | CGATE = 1 nF | 4 | |
| VIN Gate Turn-off Delay | tDIG(OFF) | 600 | ns | CGATE = 1 nF | 4 | ||
| Feedback Gate Turn-off Delay | tDFG(OFF) | 450 | ns | CGATE = 1 nF, VFB = 1.5V | 4 | ||
| Regulated Output Voltage, SR086 | VREG | 3.125 | 3.3 | 3.465 | V | ILOAD = 1 mA, VOUT = 9V | 4 |
| VREG Load Regulation | ΔVREG | -50 | 50 | mV | 0 mA < ILOAD < 60 mA, VOUT = 9V, TAMB = 25°C | 4 | |
| Gate VGD Diode Drop | VD | 1 | V | I = 20 mA | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 5 | ||
| Package Thermal Resistance, 8-lead SOIC (with Heat Slug) | θJA | 84 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
SR086SG-G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sr086sg-g-etched.step/sr086sg-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sr086sg-g.step/sr086sg-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (16 pp, sha256
2fb7af47c1213aab, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).