main
History Download
Ray Publish 0.1.0 03ffafe

SR086SG-G

Microchip Tech · AC-DC Controllers & Regulators · SOIC-8

SR086SG-G from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Rectified AC input voltage; the transient protector must be placed before the bridge rectifier to minimize capacitance so the rectified AC can fall below VOUT.
2 EN input Active low enable input (logic-level), used to disable the regulator, for example when used as a keep-alive supply; VEN(ON) minimum is 0.2V and VEN(OFF) maximum is 0.75 VREG.
3 GND power_in Circuit ground, which will be at the AC line potential; voltages are referenced to this pin.
4 VREG power_out Regulated output voltage fixed at 3.3V for SR086 (5V for SR087), supplied by a linear regulator from VOUT that needs at least 4V of headroom (VOUT-VREG ≥ 4V).
5 FB input Feedback input; feedback voltage with gate off is 1.18V to 1.31V (typ. 1.25V), with absolute maximum of -0.3V to 6.5V.
6 VOUT power_out Main output voltage, adjustable from 9V to 50V by the feedback divider, with absolute maximum of 56V.
7 VGD power_out Gate drive supply referenced to VOUT, specified at 11V to 15V (typ. 13V), with a diode drop of 1V maximum at 20 mA.
8 GATE output Drives the external IGBT pass transistor; gate output high is 11V to 15V and gate output low is 0.5V maximum, both referenced to VOUT.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 9 50 V 4
Load on VOUT, including Feedback Divider and Load on VREG IOUT 100 µA 4
Headroom for Internal Linear Regulation (VOUT-VREG) VHR 4 V 4
Output Voltage, absolute maximum VOUT -0.3 56 V 4
Feedback Voltage, absolute maximum VFB -0.3 6.5 V 4
Enable Voltage, absolute maximum VEN -0.3 6.5 V 4
Operating Junction Temperature, absolute maximum TJ -40 125 °C 4
Current Consumption at VGD IGD 60 µA 4
Current Consumption of the Lower Circuitry IOUT(INT) 400 µA VOUT = 9V-50V 4
Gate Drive Supply Voltage VGD 11 13 15 V Note 1: Referenced to VOUT 4
Gate Output High Voltage VGATE(HI) 11 15 V Note 1: Referenced to VOUT 4
Gate Output Low Voltage VGATE(LO) 0.5 V Note 1: Referenced to VOUT 4
Feedback Voltage (Gate Off) VFB(OFF) 1.18 1.25 1.31 V 4
Feedback Voltage (Hysteresis) VFB(HYST) 50 mV 4
Feedback Input Current IFB 500 nA 4
VIN Trip Voltage (Gate On) VTRIP(ON) 0 3 V Note 1: Referenced to VOUT 4
VIN Trip Voltage (Gate Off) VTRIP(OFF) 9 15 V Note 1: Referenced to VOUT 4
Enable Voltage, On VEN(ON) 0.2 V 4
Enable Voltage, Off VEN(OFF) 0.75 VREG 4
VIN Gate Turn-on Delay tDIG(ON) 0 1 µs CGATE = 1 nF 4
VIN Gate Turn-off Delay tDIG(OFF) 600 ns CGATE = 1 nF 4
Feedback Gate Turn-off Delay tDFG(OFF) 450 ns CGATE = 1 nF, VFB = 1.5V 4
Regulated Output Voltage, SR086 VREG 3.125 3.3 3.465 V ILOAD = 1 mA, VOUT = 9V 4
VREG Load Regulation ΔVREG -50 50 mV 0 mA < ILOAD < 60 mA, VOUT = 9V, TAMB = 25°C 4
Gate VGD Diode Drop VD 1 V I = 20 mA 4
Operating Junction Temperature TJ -40 125 °C 5
Package Thermal Resistance, 8-lead SOIC (with Heat Slug) θJA 84 °C/W 5

CAD (KiCad official)

  • Symbol: SR086SG-G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sr086sg-g-etched.step / sr086sg-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sr086sg-g.step / sr086sg-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (16 pp, sha256 2fb7af47c1213aab, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF