main
Ray Publish 0.1.0 03ffafe
{
  "slug": "sr086sg-g",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech AC-DC Controllers & Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "sr086sg-g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sr086sg-g.kicad_sym",
    "sr086sg-g.kicad_mod",
    "sr086sg-g.glb",
    "sr086sg-g.step",
    "sr086sg-g.lbr",
    "docs/hero.png",
    "docs/sr086sg-g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sr086sg-g-hero.glb",
    "sr086sg-g-hero.overlay.json",
    "sr086sg-g-etched.glb"
  ],
  "component": {
    "mpn": "SR086SG-G",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Supply Chip",
    "subcategory": "AC-DC Controllers & Regulators",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/c91f025727050c9e89ec01429a99845a.pdf",
    "parts": {
      "symbol": "sr086sg-g.kicad_sym",
      "footprint": "sr086sg-g.kicad_mod",
      "model_3d": "sr086sg-g-hero.glb",
      "model_3d_plain": "sr086sg-g-etched.glb",
      "model_3d_step": "sr086sg-g-etched.step",
      "model_3d_step_plain": "sr086sg-g.step",
      "lbr": "sr086sg-g.lbr"
    },
    "distributor_links": {
      "lcsc": "C624740",
      "digikey": "SR086SG-GTR-ND",
      "mouser": "689-SR086SG-G"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T07:18:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "SR086SG-GTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "689-SR086SG-G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Rectified AC input voltage; the transient protector must be placed before the bridge rectifier to minimize capacitance so the rectified AC can fall below VOUT."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Active low enable input (logic-level), used to disable the regulator, for example when used as a keep-alive supply; VEN(ON) minimum is 0.2V and VEN(OFF) maximum is 0.75 VREG."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Circuit ground, which will be at the AC line potential; voltages are referenced to this pin."
      },
      {
        "number": "4",
        "name": "VREG",
        "type": "power_out",
        "description": "Regulated output voltage fixed at 3.3V for SR086 (5V for SR087), supplied by a linear regulator from VOUT that needs at least 4V of headroom (VOUT-VREG ≥ 4V)."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input; feedback voltage with gate off is 1.18V to 1.31V (typ. 1.25V), with absolute maximum of -0.3V to 6.5V."
      },
      {
        "number": "6",
        "name": "VOUT",
        "type": "power_out",
        "description": "Main output voltage, adjustable from 9V to 50V by the feedback divider, with absolute maximum of 56V."
      },
      {
        "number": "7",
        "name": "VGD",
        "type": "power_out",
        "description": "Gate drive supply referenced to VOUT, specified at 11V to 15V (typ. 13V), with a diode drop of 1V maximum at 20 mA."
      },
      {
        "number": "8",
        "name": "GATE",
        "type": "output",
        "description": "Drives the external IGBT pass transistor; gate output high is 11V to 15V and gate output low is 0.5V maximum, both referenced to VOUT."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet notes the SOIC package has a heat slug at ground potential that may be connected to gr; Pin names are the same for SR086 and SR087 except VREG, whose regulated output is 3.3V for SR086 and; Pin types are KiCad-class assignments inferred from the functional descriptions (for example VGD and"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0043,
        "at": "2026-11-12T07:18:05"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/c91f025727050c9e89ec01429a99845a.pdf",
        "pages": 16,
        "sha256": "2fb7af47c1213aab",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sr086sg-g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sr086sg-g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "fd8cad24727502fad7f28790f6f3f534e9c98407d3006850b070852710a38706",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SG",
      "source_page": 12,
      "D": {
        "nom_mm": 4.9,
        "range_mm": [
          4.8,
          5.0
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.8,
          4.0
        ]
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": [
          5.8,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.475,
        "range_mm": [
          1.25,
          1.7
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "sr086sg-g.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}