Generated by kicad-footprint-generator · KiCad file format 20260206
SP3088EEN-L
MaxLinear · RS-485 / RS-422 ICs · SOIC-8
SP3088EEN-L from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: when RE is low and A-B is at least -40mV, RO is high; when A-B is at or below -200mV, RO is low. |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and high-impedance when RE is high; drive RE high and DE low to enter shutdown; RE is a hot-swap input. |
| 3 | DE | input | Driver output enable: outputs are enabled when DE is high and high-impedance when DE is low; drive DE low and RE high to enter shutdown; DE is a hot-swap input. |
| 4 | DI | input | Driver input: with DE high, a low level forces the noninverting output low and the inverting output high, and a high level forces the noninverting output high and the inverting output low. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Noninverting receiver input and noninverting driver output on the RS-485 bus. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output on the RS-485 bus. |
| 8 | VCC | power_in | Positive supply VCC; bypass to GND with a 0.1µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic input threshold, high | VIH | 2 | V | 11 | |||
| Logic input threshold, low | VIL | 0.8 | V | 11 | |||
| Logic input current | -1 | 1 | µA | TA = 25°C, after first transition | 11 | ||
| Differential driver output, RL = 100Ω (RS-422) | VOD | 2 | V | RL= 100Ω (RS-422) | 11 | ||
| Differential driver output, RL = 54Ω (RS-485) | VOD | 1.5 | 2.7 | V | RL= 54Ω (RS-485) | 11 | |
| Differential driver output, Test 2 | VOD | 1.5 | V | VCM = -7 to +12V | 11 | ||
| Change in magnitude of differential output voltage | ΔVOD | -0.2 | 0.2 | V | RL= 54Ω or 100Ω | 11 | |
| Driver common mode output voltage | 1 | 3 | V | RL= 54Ω or 100Ω | 11 | ||
| Change in common mode output voltage | ΔVOC | -0.2 | 0.2 | uA | RL= 54Ω or 100Ω | 11 | |
| Driver short circuit current limit | -250 | 250 | mA | -7V ≤ VOUT ≤ 12V | 11 | ||
| Input current (A, B pins), VIN = 12V | 125 | µA | DE = 0, RE = 0, VCC = 0 or 5.5V, VIN = 12V | 11 | |||
| Input current (A, B pins), VIN = -7V | -100 | µA | DE = 0, RE = 0, VCC = 0 or 5.5V, VIN = -7V | 11 | |||
| Receiver differential threshold (VA - VB) | -200 | -125 | -40 | mV | -7V ≤ VCM ≤ 12V | 11 | |
| High-Z receiver output current | -1 | 1 | µA | VCC = 5.5V, 0 ≤ VOUT ≤ VCC | 11 | ||
| Driver differential skew (tPLH - tPHL), SP3088E | -5 | 5 | ns | 13 | |||
| Receiver propagation delay skew, SP3088E | -5 | 5 | ns | 13 | |||
| Supply voltage | VCC | 7 | V | 9 | |||
| Input voltage at control input pins (RE, DE) | -0.3 | V | 9 | ||||
| Driver input voltage (DI) | -0.3 | V | 9 | ||||
| Driver output voltage (A, B, Y & Z) | -13 | 13 | V | 9 | |||
| Receiver output voltage (RO) | -0.3 | V | 9 | ||||
| Receiver input voltage (A, B) | -13 | 13 | V | 9 | |||
| Voltage input range, transient pulse | -65 | 65 | V | A, B, Y and Z through 100Ω, see Figure 59 | 9 | ||
| Receiver output current | -95 | 95 | mA | 9 | |||
| Maximum junction temperature | 150 | °C | 9 | ||||
| Storage temperature range | -65 | 150 | °C | 9 | |||
| Lead temperature (soldering, 10s) | 300 | °C | 9 | ||||
| HBM - Human Body Model (pins A, B, Y & Z) | -15 | 15 | kV | 9 | |||
| HBM - Human Body Model (pins RO, DI, DE) | -2 | 2 | kV | 9 | |||
| IEC 1000-4-2 Airgap Discharge (pins Y, Z, A & B) | -15 | 15 | kV | 9 | |||
| IEC 1000-4-2 Contact Discharge (pins Y, Z, A & B) | -8 | 8 | kV | 9 | |||
| Supply voltage VCC | VCC | 4.5 | 5 | 5.5 | V | 10 | |
| Input voltage on A and B pins | -7 | 12 | V | 10 | |||
| High-level input voltage (DI, DE or RE) | VIH | 2 | V | 10 | |||
| Low-level input voltage (DI, DE or RE) | VIH | 0 | 0.8 | V | 10 | ||
| Output current, driver | -60 | 60 | mA | 10 | |||
| Output current, receiver | -8 | 8 | mA | 10 | |||
| Operating free air temperature, TA | TA | -40 | 85 | °C | Industrial grade (E) | 10 | |
| Thermal resistance, junction-to-ambient, 8-pin SO | θJA | 128.4 | °C/W | 9 |
CAD (KiCad official)
- Symbol:
SP3088EEN-L - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sp3088een-l-etched.step/sp3088een-l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sp3088een-l.step/sp3088een-l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (35 pp, sha256
8bc1dcd9cf9b5d54, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).