main
History Download
Ray Publish 0.1.0 de584c4

SP3088EEN-L

MaxLinear · RS-485 / RS-422 ICs · SOIC-8

SP3088EEN-L from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: when RE is low and A-B is at least -40mV, RO is high; when A-B is at or below -200mV, RO is low.
2 RE input Receiver output enable: RO is enabled when RE is low and high-impedance when RE is high; drive RE high and DE low to enter shutdown; RE is a hot-swap input.
3 DE input Driver output enable: outputs are enabled when DE is high and high-impedance when DE is low; drive DE low and RE high to enter shutdown; DE is a hot-swap input.
4 DI input Driver input: with DE high, a low level forces the noninverting output low and the inverting output high, and a high level forces the noninverting output high and the inverting output low.
5 GND power_in Ground reference for the device.
6 A bidirectional Noninverting receiver input and noninverting driver output on the RS-485 bus.
7 B bidirectional Inverting receiver input and inverting driver output on the RS-485 bus.
8 VCC power_in Positive supply VCC; bypass to GND with a 0.1µF capacitor.

Key specifications

Parameter Value
Manufacturer MaxLinear
Package SOIC-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic input threshold, high VIH 2 V 11
Logic input threshold, low VIL 0.8 V 11
Logic input current -1 1 µA TA = 25°C, after first transition 11
Differential driver output, RL = 100Ω (RS-422) VOD 2 V RL= 100Ω (RS-422) 11
Differential driver output, RL = 54Ω (RS-485) VOD 1.5 2.7 V RL= 54Ω (RS-485) 11
Differential driver output, Test 2 VOD 1.5 V VCM = -7 to +12V 11
Change in magnitude of differential output voltage ΔVOD -0.2 0.2 V RL= 54Ω or 100Ω 11
Driver common mode output voltage 1 3 V RL= 54Ω or 100Ω 11
Change in common mode output voltage ΔVOC -0.2 0.2 uA RL= 54Ω or 100Ω 11
Driver short circuit current limit -250 250 mA -7V ≤ VOUT ≤ 12V 11
Input current (A, B pins), VIN = 12V 125 µA DE = 0, RE = 0, VCC = 0 or 5.5V, VIN = 12V 11
Input current (A, B pins), VIN = -7V -100 µA DE = 0, RE = 0, VCC = 0 or 5.5V, VIN = -7V 11
Receiver differential threshold (VA - VB) -200 -125 -40 mV -7V ≤ VCM ≤ 12V 11
High-Z receiver output current -1 1 µA VCC = 5.5V, 0 ≤ VOUT ≤ VCC 11
Driver differential skew (tPLH - tPHL), SP3088E -5 5 ns 13
Receiver propagation delay skew, SP3088E -5 5 ns 13
Supply voltage VCC 7 V 9
Input voltage at control input pins (RE, DE) -0.3 V 9
Driver input voltage (DI) -0.3 V 9
Driver output voltage (A, B, Y & Z) -13 13 V 9
Receiver output voltage (RO) -0.3 V 9
Receiver input voltage (A, B) -13 13 V 9
Voltage input range, transient pulse -65 65 V A, B, Y and Z through 100Ω, see Figure 59 9
Receiver output current -95 95 mA 9
Maximum junction temperature 150 °C 9
Storage temperature range -65 150 °C 9
Lead temperature (soldering, 10s) 300 °C 9
HBM - Human Body Model (pins A, B, Y & Z) -15 15 kV 9
HBM - Human Body Model (pins RO, DI, DE) -2 2 kV 9
IEC 1000-4-2 Airgap Discharge (pins Y, Z, A & B) -15 15 kV 9
IEC 1000-4-2 Contact Discharge (pins Y, Z, A & B) -8 8 kV 9
Supply voltage VCC VCC 4.5 5 5.5 V 10
Input voltage on A and B pins -7 12 V 10
High-level input voltage (DI, DE or RE) VIH 2 V 10
Low-level input voltage (DI, DE or RE) VIH 0 0.8 V 10
Output current, driver -60 60 mA 10
Output current, receiver -8 8 mA 10
Operating free air temperature, TA TA -40 85 °C Industrial grade (E) 10
Thermal resistance, junction-to-ambient, 8-pin SO θJA 128.4 °C/W 9

CAD (KiCad official)

  • Symbol: SP3088EEN-L
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sp3088een-l-etched.step / sp3088een-l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sp3088een-l.step / sp3088een-l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (35 pp, sha256 8bc1dcd9cf9b5d54, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF