main
Ray Publish 0.1.0 de584c4
{
  "slug": "sp3088een-l",
  "version": "0.1.0",
  "type": "component",
  "description": "MaxLinear RS-485 / RS-422 ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "sp3088een-l",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sp3088een-l.kicad_sym",
    "sp3088een-l.kicad_mod",
    "sp3088een-l.glb",
    "sp3088een-l.step",
    "sp3088een-l.lbr",
    "docs/hero.png",
    "docs/sp3088een-l-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sp3088een-l-hero.glb",
    "sp3088een-l-hero.overlay.json",
    "sp3088een-l-etched.glb"
  ],
  "component": {
    "mpn": "SP3088EEN-L",
    "manufacturer": "MaxLinear",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Interface",
    "subcategory": "RS-485 / RS-422 ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590911636998082560",
    "parts": {
      "symbol": "sp3088een-l.kicad_sym",
      "footprint": "sp3088een-l.kicad_mod",
      "model_3d": "sp3088een-l-hero.glb",
      "model_3d_plain": "sp3088een-l-etched.glb",
      "model_3d_step": "sp3088een-l-etched.step",
      "model_3d_step_plain": "sp3088een-l.step",
      "lbr": "sp3088een-l.lbr"
    },
    "distributor_links": {
      "lcsc": "C916175",
      "digikey": "1016-1060-5-ND",
      "mouser": "701-SP3088EEN-L"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T03:29:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1016-1060-5-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "701-SP3088EEN-L",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RO",
        "type": "output",
        "description": "Receiver output: when RE is low and A-B is at least -40mV, RO is high; when A-B is at or below -200mV, RO is low."
      },
      {
        "number": "2",
        "name": "RE",
        "type": "input",
        "description": "Receiver output enable: RO is enabled when RE is low and high-impedance when RE is high; drive RE high and DE low to enter shutdown; RE is a hot-swap input."
      },
      {
        "number": "3",
        "name": "DE",
        "type": "input",
        "description": "Driver output enable: outputs are enabled when DE is high and high-impedance when DE is low; drive DE low and RE high to enter shutdown; DE is a hot-swap input."
      },
      {
        "number": "4",
        "name": "DI",
        "type": "input",
        "description": "Driver input: with DE high, a low level forces the noninverting output low and the inverting output high, and a high level forces the noninverting output high and the inverting output low."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "6",
        "name": "A",
        "type": "bidirectional",
        "description": "Noninverting receiver input and noninverting driver output on the RS-485 bus."
      },
      {
        "number": "7",
        "name": "B",
        "type": "bidirectional",
        "description": "Inverting receiver input and inverting driver output on the RS-485 bus."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply VCC; bypass to GND with a 0.1µF capacitor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: SP3088EEN-L is ordered as NSOIC8 (Table 16), so the 8-pin Half Duplex pinout (Table 15, column SP308; The text extract does not include the Recommended Operating Conditions or Electrical Characteristics"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0651,
        "at": "2026-10-19T03:27:22"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590911636998082560",
        "pages": 35,
        "sha256": "8bc1dcd9cf9b5d54",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sp3088een-l.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sp3088een-l-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2dd42c5f9bd5143e497d4154dcae5b41a4c3ebab2afd377a360a3809eb6b2480",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}