main
Ray sn74hc573aqdwrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) b3f0355
{
  "schema_version": 1,
  "type": "component",
  "slug": "sn74hc573aqdwrq1",
  "title": "SN74HC573AQDWRQ1",
  "brief": "Texas Instruments Latches, SOIC-20-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "logic",
    "sn74hc573aqdwrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "SN74HC573AQDWRQ1",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-20-300mil",
    "pin_count": 20,
    "category": "Logic",
    "subcategory": "Latches",
    "datasheet": "https://www.ti.com/cn/lit/gpn/sn74hc573a-q1",
    "parts": {
      "symbol": "sn74hc573aqdwrq1.kicad_sym",
      "footprint": "sn74hc573aqdwrq1.kicad_mod",
      "model_3d": "sn74hc573aqdwrq1-etched.glb",
      "model_3d_plain": "sn74hc573aqdwrq1.glb",
      "model_3d_step": "sn74hc573aqdwrq1-etched.step",
      "model_3d_step_plain": "sn74hc573aqdwrq1.step",
      "lbr": "sn74hc573aqdwrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2675252"
    },
    "pins": [
      {
        "number": "1",
        "name": "OE",
        "type": "input",
        "description": "Active-low, buffered output-enable input; when low the Q outputs reflect the latch contents, when high all eight Q outputs are forced to the high-impedance state; OE does not affect internal latch operation and should be tied to VCC through a pull-up resistor to ensure high-impedance state during power up/down."
      },
      {
        "number": "2",
        "name": "1Q",
        "type": "tri_state",
        "description": "Three-state output of latch 1; reflects the latched or transparent 1D data and goes to high-impedance when OE is high, capable of ±6mA drive at VCC=5V."
      },
      {
        "number": "3",
        "name": "2Q",
        "type": "tri_state",
        "description": "Three-state output of latch 2; reflects the latched or transparent 2D data and goes to high-impedance when OE is high."
      },
      {
        "number": "4",
        "name": "3Q",
        "type": "tri_state",
        "description": "Three-state output of latch 3; reflects the latched or transparent 3D data and goes to high-impedance when OE is high."
      },
      {
        "number": "5",
        "name": "4Q",
        "type": "tri_state",
        "description": "Three-state output of latch 4; reflects the latched or transparent 4D data and goes to high-impedance when OE is high."
      },
      {
        "number": "6",
        "name": "5Q",
        "type": "tri_state",
        "description": "Three-state output of latch 5; reflects the latched or transparent 5D data and goes to high-impedance when OE is high."
      },
      {
        "number": "7",
        "name": "6Q",
        "type": "tri_state",
        "description": "Three-state output of latch 6; reflects the latched or transparent 6D data and goes to high-impedance when OE is high."
      },
      {
        "number": "8",
        "name": "7Q",
        "type": "tri_state",
        "description": "Three-state output of latch 7; reflects the latched or transparent 7D data and goes to high-impedance when OE is high."
      },
      {
        "number": "9",
        "name": "8Q",
        "type": "tri_state",
        "description": "Three-state output of latch 8; reflects the latched or transparent 8D data and goes to high-impedance when OE is high."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "11",
        "name": "LE",
        "type": "input",
        "description": "Latch-enable input; while LE is high the Q outputs are transparent and follow the D inputs, when LE goes low the data present at setup time is latched and held at the outputs."
      },
      {
        "number": "12",
        "name": "8D",
        "type": "input",
        "description": "Data input to latch 8; while LE is high this value is passed to 8Q, and is captured on the high-to-low transition of LE."
      },
      {
        "number": "13",
        "name": "7D",
        "type": "input",
        "description": "Data input to latch 7; while LE is high this value is passed to 7Q, and is captured on the high-to-low transition of LE."
      },
      {
        "number": "14",
        "name": "6D",
        "type": "input",
        "description": "Data input to latch 6; while LE is high this value is passed to 6Q, and is captured on the high-to-low transition of LE."
      },
      {
        "number": "15",
        "name": "5D",
        "type": "input",
        "description": "Data input to latch 5; while LE is high this value is passed to 5Q, and is captured on the high-to-low transition of LE."
      },
      {
        "number": "16",
        "name": "4D",
        "type": "input",
        "description": "Data input to latch 4; while LE is high this value is passed to 4Q, and is captured on the high-to-low transition of LE."
      },
      {
        "number": "17",
        "name": "3D",
        "type": "input",
        "description": "Data input to latch 3; while LE is high this value is passed to 3Q, and is captured on the high-to-low transition of LE."
      },
      {
        "number": "18",
        "name": "2D",
        "type": "input",
        "description": "Data input to latch 2; while LE is high this value is passed to 2Q, and is captured on the high-to-low transition of LE."
      },
      {
        "number": "19",
        "name": "1D",
        "type": "input",
        "description": "Data input to latch 1; while LE is high this value is passed to 1Q, and is captured on the high-to-low transition of LE."
      },
      {
        "number": "20",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage; recommended operating range is 2V to 6V (absolute maximum 7V); a 0.1µF bypass capacitor close to this pin is recommended."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin configuration extracted from PAGE 3 diagram. The diagram text format is somewhat ambiguous in th"
        ],
        "pages_sent": 21,
        "cost_usd": 0.2749,
        "at": "2026-09-23T21:55:54"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/sn74hc573a-q1",
        "pages": 21,
        "sha256": "c41975c31fa2cc1c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn74hc573aqdwrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn74hc573aqdwrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3a40e23c6c081a56c5dd9a08e9b6f3862da3ecf56aa0cdb34b84048de2158d90",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-20-300mil",
      "Category": "Logic",
      "Pins": "20"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sn74hc573aqdwrq1"
  ],
  "discovery_pitch": "SN74HC573AQDWRQ1 (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn74hc573aqdwrq1.kicad_sym",
    "sn74hc573aqdwrq1.kicad_mod",
    "sn74hc573aqdwrq1.glb",
    "sn74hc573aqdwrq1.step",
    "sn74hc573aqdwrq1.lbr",
    "docs/hero.png",
    "docs/sn74hc573aqdwrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}