main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn74hc573aqdwrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sn74hc573aqdwrq1: viewers · Ray
package.json sn74hc573aqdwrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json sn74hc573aqdwrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/sn74hc573aqdwrq1 · Ray
sn74hc573aqdwrq1-etched.fit.json sn74hc573aqdwrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74hc573aqdwrq1-etched.glb sn74hc573aqdwrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74hc573aqdwrq1-etched.step sn74hc573aqdwrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74hc573aqdwrq1.glb Publish 0.1.0 · Ray
sn74hc573aqdwrq1.kicad_mod Publish 0.1.0 · Ray
sn74hc573aqdwrq1.kicad_sym Publish 0.1.0 · Ray
sn74hc573aqdwrq1.lbr Publish 0.1.0 · Ray
sn74hc573aqdwrq1.step Publish 0.1.0 · Ray

SN74HC573AQDWRQ1

Texas Instruments · Latches · SOIC-20-300mil

SN74HC573AQDWRQ1 from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Active-low, buffered output-enable input; when low the Q outputs reflect the latch contents, when high all eight Q outputs are forced to the high-impedance state; OE does not affect internal latch operation and should be tied to VCC through a pull-up resistor to ensure high-impedance state during power up/down.
2 1Q tri_state Three-state output of latch 1; reflects the latched or transparent 1D data and goes to high-impedance when OE is high, capable of ±6mA drive at VCC=5V.
3 2Q tri_state Three-state output of latch 2; reflects the latched or transparent 2D data and goes to high-impedance when OE is high.
4 3Q tri_state Three-state output of latch 3; reflects the latched or transparent 3D data and goes to high-impedance when OE is high.
5 4Q tri_state Three-state output of latch 4; reflects the latched or transparent 4D data and goes to high-impedance when OE is high.
6 5Q tri_state Three-state output of latch 5; reflects the latched or transparent 5D data and goes to high-impedance when OE is high.
7 6Q tri_state Three-state output of latch 6; reflects the latched or transparent 6D data and goes to high-impedance when OE is high.
8 7Q tri_state Three-state output of latch 7; reflects the latched or transparent 7D data and goes to high-impedance when OE is high.
9 8Q tri_state Three-state output of latch 8; reflects the latched or transparent 8D data and goes to high-impedance when OE is high.
10 GND power_in Ground reference pin for the device.
11 LE input Latch-enable input; while LE is high the Q outputs are transparent and follow the D inputs, when LE goes low the data present at setup time is latched and held at the outputs.
12 8D input Data input to latch 8; while LE is high this value is passed to 8Q, and is captured on the high-to-low transition of LE.
13 7D input Data input to latch 7; while LE is high this value is passed to 7Q, and is captured on the high-to-low transition of LE.
14 6D input Data input to latch 6; while LE is high this value is passed to 6Q, and is captured on the high-to-low transition of LE.
15 5D input Data input to latch 5; while LE is high this value is passed to 5Q, and is captured on the high-to-low transition of LE.
16 4D input Data input to latch 4; while LE is high this value is passed to 4Q, and is captured on the high-to-low transition of LE.
17 3D input Data input to latch 3; while LE is high this value is passed to 3Q, and is captured on the high-to-low transition of LE.
18 2D input Data input to latch 2; while LE is high this value is passed to 2Q, and is captured on the high-to-low transition of LE.
19 1D input Data input to latch 1; while LE is high this value is passed to 1Q, and is captured on the high-to-low transition of LE.
20 VCC power_in Positive supply voltage; recommended operating range is 2V to 6V (absolute maximum 7V); a 0.1µF bypass capacitor close to this pin is recommended.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20-300mil
Category Logic
Pins 20

CAD (KiCad official)

  • Symbol: SN74HC573AQDWRQ1
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: sn74hc573aqdwrq1-etched.step / sn74hc573aqdwrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74hc573aqdwrq1.step / sn74hc573aqdwrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (21 pp, sha256 c41975c31fa2cc1c, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF