main
Ray
Initial commit: component/sn74hc174dr
7838568
SN74HC174DR
Texas Instruments · Flip Flops · SOIC-16
SN74HC174DR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLR | input | Active-low asynchronous clear input; when low it forces all six flip-flop outputs (Q) low regardless of CLK or D. |
| 2 | 1Q | output | Output of flip-flop 1, reflecting the state of D1 latched on the last CLK positive edge (or forced low by CLR). |
| 3 | 1D | input | Data input to flip-flop 1; its logic level is transferred to 1Q on the positive-going edge of CLK when CLR is high. |
| 4 | 2D | input | Data input to flip-flop 2; its logic level is transferred to 2Q on the positive-going edge of CLK when CLR is high. |
| 5 | 2Q | output | Output of flip-flop 2, reflecting the state of D2 latched on the last CLK positive edge (or forced low by CLR). |
| 6 | 3D | input | Data input to flip-flop 3; its logic level is transferred to 3Q on the positive-going edge of CLK when CLR is high. |
| 7 | 3Q | output | Output of flip-flop 3, reflecting the state of D3 latched on the last CLK positive edge (or forced low by CLR). |
| 8 | GND | power_in | Ground reference (0 V) supply pin for the device. |
| 9 | CLK | input | Common clock input shared by all six flip-flops; data at D inputs meeting setup time is transferred to Q outputs on its positive-going edge. |
| 10 | 4Q | output | Output of flip-flop 4, reflecting the state of D4 latched on the last CLK positive edge (or forced low by CLR). |
| 11 | 4D | input | Data input to flip-flop 4; its logic level is transferred to 4Q on the positive-going edge of CLK when CLR is high. |
| 12 | 5Q | output | Output of flip-flop 5, reflecting the state of D5 latched on the last CLK positive edge (or forced low by CLR). |
| 13 | 5D | input | Data input to flip-flop 5; its logic level is transferred to 5Q on the positive-going edge of CLK when CLR is high. |
| 14 | 6D | input | Data input to flip-flop 6; its logic level is transferred to 6Q on the positive-going edge of CLK when CLR is high. |
| 15 | 6Q | output | Output of flip-flop 6, reflecting the state of D6 latched on the last CLK positive edge (or forced low by CLR). |
| 16 | VCC | power_in | Positive supply voltage pin, recommended operating range 2 V to 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Logic |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN74HC174DR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sn74hc174dr-etched.step/sn74hc174dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hc174dr.step/sn74hc174dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
9b979c6ba2b4b122, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-5(text+vision), consensusclaude-opus-4-8(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74HC174DR
**Texas Instruments** · Flip Flops · SOIC-16
SN74HC174DR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLR | input | Active-low asynchronous clear input; when low it forces all six flip-flop outputs (Q) low regardless of CLK or D. |
| 2 | 1Q | output | Output of flip-flop 1, reflecting the state of D1 latched on the last CLK positive edge (or forced low by CLR). |
| 3 | 1D | input | Data input to flip-flop 1; its logic level is transferred to 1Q on the positive-going edge of CLK when CLR is high. |
| 4 | 2D | input | Data input to flip-flop 2; its logic level is transferred to 2Q on the positive-going edge of CLK when CLR is high. |
| 5 | 2Q | output | Output of flip-flop 2, reflecting the state of D2 latched on the last CLK positive edge (or forced low by CLR). |
| 6 | 3D | input | Data input to flip-flop 3; its logic level is transferred to 3Q on the positive-going edge of CLK when CLR is high. |
| 7 | 3Q | output | Output of flip-flop 3, reflecting the state of D3 latched on the last CLK positive edge (or forced low by CLR). |
| 8 | GND | power_in | Ground reference (0 V) supply pin for the device. |
| 9 | CLK | input | Common clock input shared by all six flip-flops; data at D inputs meeting setup time is transferred to Q outputs on its positive-going edge. |
| 10 | 4Q | output | Output of flip-flop 4, reflecting the state of D4 latched on the last CLK positive edge (or forced low by CLR). |
| 11 | 4D | input | Data input to flip-flop 4; its logic level is transferred to 4Q on the positive-going edge of CLK when CLR is high. |
| 12 | 5Q | output | Output of flip-flop 5, reflecting the state of D5 latched on the last CLK positive edge (or forced low by CLR). |
| 13 | 5D | input | Data input to flip-flop 5; its logic level is transferred to 5Q on the positive-going edge of CLK when CLR is high. |
| 14 | 6D | input | Data input to flip-flop 6; its logic level is transferred to 6Q on the positive-going edge of CLK when CLR is high. |
| 15 | 6Q | output | Output of flip-flop 6, reflecting the state of D6 latched on the last CLK positive edge (or forced low by CLR). |
| 16 | VCC | power_in | Positive supply voltage pin, recommended operating range 2 V to 6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Logic |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `SN74HC174DR`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `sn74hc174dr-etched.step` / `sn74hc174dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc174dr.step` / `sn74hc174dr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74hc174.pdf) (31 pp, sha256 `9b979c6ba2b4b122`, retrieved 2026-09-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-5` (text+vision), consensus `claude-opus-4-8` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74hc174dr-datasheet.pdf)