← Commit history

Initial commit: component/sn74hc174dr

Ray ·7838568da1 ·
2 files changed +243
README.mdadded+52
@@ -0,0 +1,52 @@+# SN74HC174DR++**Texas Instruments** · Flip Flops · SOIC-16++SN74HC174DR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CLR | input | Active-low asynchronous clear input; when low it forces all six flip-flop outputs (Q) low regardless of CLK or D. |+| 2 | 1Q | output | Output of flip-flop 1, reflecting the state of D1 latched on the last CLK positive edge (or forced low by CLR). |+| 3 | 1D | input | Data input to flip-flop 1; its logic level is transferred to 1Q on the positive-going edge of CLK when CLR is high. |+| 4 | 2D | input | Data input to flip-flop 2; its logic level is transferred to 2Q on the positive-going edge of CLK when CLR is high. |+| 5 | 2Q | output | Output of flip-flop 2, reflecting the state of D2 latched on the last CLK positive edge (or forced low by CLR). |+| 6 | 3D | input | Data input to flip-flop 3; its logic level is transferred to 3Q on the positive-going edge of CLK when CLR is high. |+| 7 | 3Q | output | Output of flip-flop 3, reflecting the state of D3 latched on the last CLK positive edge (or forced low by CLR). |+| 8 | GND | power_in | Ground reference (0 V) supply pin for the device. |+| 9 | CLK | input | Common clock input shared by all six flip-flops; data at D inputs meeting setup time is transferred to Q outputs on its positive-going edge. |+| 10 | 4Q | output | Output of flip-flop 4, reflecting the state of D4 latched on the last CLK positive edge (or forced low by CLR). |+| 11 | 4D | input | Data input to flip-flop 4; its logic level is transferred to 4Q on the positive-going edge of CLK when CLR is high. |+| 12 | 5Q | output | Output of flip-flop 5, reflecting the state of D5 latched on the last CLK positive edge (or forced low by CLR). |+| 13 | 5D | input | Data input to flip-flop 5; its logic level is transferred to 5Q on the positive-going edge of CLK when CLR is high. |+| 14 | 6D | input | Data input to flip-flop 6; its logic level is transferred to 6Q on the positive-going edge of CLK when CLR is high. |+| 15 | 6Q | output | Output of flip-flop 6, reflecting the state of D6 latched on the last CLK positive edge (or forced low by CLR). |+| 16 | VCC | power_in | Positive supply voltage pin, recommended operating range 2 V to 6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN74HC174DR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `sn74hc174dr-etched.step` / `sn74hc174dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc174dr.step` / `sn74hc174dr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74hc174.pdf) (31 pp, sha256 `9b979c6ba2b4b122`, retrieved 2026-09-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-5` (text+vision), consensus `claude-opus-4-8` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74hc174dr-datasheet.pdf)
page.jsonadded+191
@@ -0,0 +1,191 @@+{+  "slug": "sn74hc174dr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Flip Flops, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74hc174dr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74hc174dr.kicad_sym",+    "sn74hc174dr.kicad_mod",+    "sn74hc174dr.glb",+    "sn74hc174dr.step",+    "sn74hc174dr.lbr",+    "docs/hero.png",+    "docs/sn74hc174dr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74HC174DR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16",+    "pin_count": 16,+    "category": "Logic",+    "subcategory": "Flip Flops",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74hc174.pdf",+    "parts": {+      "symbol": "sn74hc174dr.kicad_sym",+      "footprint": "sn74hc174dr.kicad_mod",+      "model_3d": "sn74hc174dr-etched.glb",+      "model_3d_plain": "sn74hc174dr.glb",+      "model_3d_step": "sn74hc174dr-etched.step",+      "model_3d_step_plain": "sn74hc174dr.step",+      "lbr": "sn74hc174dr.lbr"+    },+    "distributor_links": {+      "lcsc": "C6828"+    },+    "pins": [+      {+        "number": "1",+        "name": "CLR",+        "type": "input",+        "description": "Active-low asynchronous clear input; when low it forces all six flip-flop outputs (Q) low regardless of CLK or D."+      },+      {+        "number": "2",+        "name": "1Q",+        "type": "output",+        "description": "Output of flip-flop 1, reflecting the state of D1 latched on the last CLK positive edge (or forced low by CLR)."+      },+      {+        "number": "3",+        "name": "1D",+        "type": "input",+        "description": "Data input to flip-flop 1; its logic level is transferred to 1Q on the positive-going edge of CLK when CLR is high."+      },+      {+        "number": "4",+        "name": "2D",+        "type": "input",+        "description": "Data input to flip-flop 2; its logic level is transferred to 2Q on the positive-going edge of CLK when CLR is high."+      },+      {+        "number": "5",+        "name": "2Q",+        "type": "output",+        "description": "Output of flip-flop 2, reflecting the state of D2 latched on the last CLK positive edge (or forced low by CLR)."+      },+      {+        "number": "6",+        "name": "3D",+        "type": "input",+        "description": "Data input to flip-flop 3; its logic level is transferred to 3Q on the positive-going edge of CLK when CLR is high."+      },+      {+        "number": "7",+        "name": "3Q",+        "type": "output",+        "description": "Output of flip-flop 3, reflecting the state of D3 latched on the last CLK positive edge (or forced low by CLR)."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V) supply pin for the device."+      },+      {+        "number": "9",+        "name": "CLK",+        "type": "input",+        "description": "Common clock input shared by all six flip-flops; data at D inputs meeting setup time is transferred to Q outputs on its positive-going edge."+      },+      {+        "number": "10",+        "name": "4Q",+        "type": "output",+        "description": "Output of flip-flop 4, reflecting the state of D4 latched on the last CLK positive edge (or forced low by CLR)."+      },+      {+        "number": "11",+        "name": "4D",+        "type": "input",+        "description": "Data input to flip-flop 4; its logic level is transferred to 4Q on the positive-going edge of CLK when CLR is high."+      },+      {+        "number": "12",+        "name": "5Q",+        "type": "output",+        "description": "Output of flip-flop 5, reflecting the state of D5 latched on the last CLK positive edge (or forced low by CLR)."+      },+      {+        "number": "13",+        "name": "5D",+        "type": "input",+        "description": "Data input to flip-flop 5; its logic level is transferred to 5Q on the positive-going edge of CLK when CLR is high."+      },+      {+        "number": "14",+        "name": "6D",+        "type": "input",+        "description": "Data input to flip-flop 6; its logic level is transferred to 6Q on the positive-going edge of CLK when CLR is high."+      },+      {+        "number": "15",+        "name": "6Q",+        "type": "output",+        "description": "Output of flip-flop 6, reflecting the state of D6 latched on the last CLK positive edge (or forced low by CLR)."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage pin, recommended operating range 2 V to 6 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-sonnet-5",+        "primary_mode": "text+vision",+        "consensus_model": "claude-opus-4-8",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": 31,+        "cost_usd": 0.7864,+        "at": "2026-09-23T03:52:43"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/sn74hc174.pdf",+        "pages": 31,+        "sha256": "9b979c6ba2b4b122",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file