main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn65lvds050ipwrq1: factory component page (tier=mfr) · Ray
viewers sn65lvds050ipwrq1: viewers · Ray
package.json Publish 0.1.6 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.6 · Ray
sn65lvds050ipwrq1-etched.glb sn65lvds050ipwrq1: one-pass backfill (re-etched, pushed with pre-existing FAIL: datasheet) · Ray
sn65lvds050ipwrq1-etched.step sn65lvds050ipwrq1: factory component page (tier=mfr) · Ray
sn65lvds050ipwrq1-hero.glb sn65lvds050ipwrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
sn65lvds050ipwrq1-hero.overlay.json sn65lvds050ipwrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
sn65lvds050ipwrq1.glb Publish 0.1.0 · Ray
sn65lvds050ipwrq1.kicad_mod Publish 0.1.0 · Ray
sn65lvds050ipwrq1.kicad_sym Publish 0.1.0 · Ray
sn65lvds050ipwrq1.lbr Publish 0.1.5 · Ray
sn65lvds050ipwrq1.step Publish 0.1.0 · Ray
verification.json Verified: Rebuilt by the parts factory: tier mfr, 16 pins; datasheet names confirmed by reviewer part-reviewer (ray rev… · Ray

SN65LVDS050IPWRQ1

Texas Instruments · LVDS ICs · TSSOP-16

SN65LVDS050IPWRQ1 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1B input Receiver 1 inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V.
2 1A input Receiver 1 non-inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V.
3 1R output Receiver 1 LVTTL output, high impedance when RE is high and driven low/high by VID with a 50 mV threshold.
4 RE input Active-low receiver enable shared by both receivers; high puts the R outputs in high impedance, with 5-V tolerant LVTTL input (-0.5 V to 6 V).
5 2R output Receiver 2 LVTTL output, high impedance when RE is high and driven low/high by VID with a 50 mV threshold.
6 2A input Receiver 2 non-inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V.
7 2B input Receiver 2 inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V.
8 GND power_in Ground reference for the device.
9 2D input Driver 2 LVTTL data input, 5-V tolerant (-0.5 V to 6 V), with VIH min 2 V and VIL max 0.8 V.
10 2Y output Driver 2 non-inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V.
11 2Z output Driver 2 inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V.
12 DE input Driver enable shared by both drivers; low disconnects the input and turns the outputs off, 5-V tolerant LVTTL input (-0.5 V to 6 V).
13 1Z output Driver 1 inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V.
14 1Y output Driver 1 non-inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V.
15 1D input Driver 1 LVTTL data input, 5-V tolerant (-0.5 V to 6 V), with VIH min 2 V and VIL max 0.8 V.
16 VCC power_in Supply voltage, 3 V to 3.6 V recommended (3.3 V nominal), absolute maximum -0.5 V to 4 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC -0.5 4 V 4
Voltage range, D, R, DE, RE -0.5 6 V 4
Voltage range, Y, Z, A, B -0.5 4 V 4
Differential output voltage /VOD/ 1 V 4
Storage temperature range -65 150 °C 4
Lead temperature 250 °C 1,6 mm (1/16 inch) from case for 10 seconds 4
Supply voltage VCC 3 3.3 3.6 V 4
High-level input voltage VIH 2 V 4
Low-level input voltage VIL 0.8 V 4
Magnitude of differential input voltage /VID/ 0.1 0.6 V 4
Magnitude of differential output voltage with disabled driver /VOD(dis)/ 520 mV 4
Driver output voltage VOY or VOZ 0 2.4 V 4
Operating free-air temperature TA -40 85 °C 4
Power rating PW(16) 839 mW TA ≤ 25°C 4
Power rating PW(16) at TA = 85°C 437 mW TA = 85°C 4
Derating factor PW(16) 6.7 mW/°C above TA = 25°C 4
Differential output voltage magnitude /VOD/ 247 340 454 mV 5
Change in differential output voltage magnitude between logic states Δ/VOD/ -50 50 mV RL = 100 Ω, See Figure 3 and Figure 2 5
Steady-state common-mode output voltage VOC(SS) 1.125 1.2 1.375 V 5
Change in steady-state common-mode output voltage between logic states ΔVOC(SS) -50 50 mV See Figure 3 5
Peak-to-peak common-mode output voltage VOC(PP) 50 150 mV 5
High-level input current, DE IIH -0.5 -20 μA VIH = 5 V 5
High-level input current, D IIH 2 20 μA VIH = 5 V 5
Low-level input current, DE IIL -0.5 -10 μA VIL = 0.8 V 5
Low-level input current, D IIL 2 10 μA VIL = 0.8 V 5
Short-circuit output current IOS 3 10 mA VOY or VOZ = 0 V 5
Off-state output current IO(OFF) -1 1 μA DE = 0 V / DE = VCC; VOY = VOZ = 0 V; VCC < 1.5 V 5
Positive-going differential input voltage threshold VIT+ 50 mV See Figure 5 6
Negative-going differential input voltage threshold VIT- -50 mV See Figure 5 6
High-level output voltage VOH 2.4 V IOH = -8 mA 6
High-level output voltage VOH 2.8 V IOH = -4 mA 6
Low-level output voltage VOL 0.4 V IOL = 8 mA 6
Input current (A or B inputs) II -2 -11 -20 μA VI = 0 6
Input current (A or B inputs) II -1.2 -3 μA VI = 2.4 V 6
Power-off input current (A or B inputs) II(OFF) -20 20 μA VCC = 0 6
High-level input current (enables) IIH -10 10 μA VIH = 5 V 6
Low-level input current (enables) IIL -10 10 μA VIL = 0.8 V 6
High-impedance output current IOZ -10 10 μA VO = 0 or 5 V 6
Driver propagation delay time, low-to-high-level output tPLH 1.7 2.7 ns RL = 100 Ω, CL = 10 pF, See Figure 2 6
Driver propagation delay time, high-to-low-level output tPHL 1.7 2.7 ns RL = 100 Ω, CL = 10 pF, See Figure 2 6
Driver differential output signal rise time tr 0.8 1 ns RL = 100 Ω, CL = 10 pF, See Figure 2 6
Driver differential output signal fall time tf 0.8 1 ns RL = 100 Ω, CL = 10 pF, See Figure 2 6
Enable time ten 4.3 10 ns See Figure 4 6
Disable time tdis 3.1 10 ns See Figure 4 6
Receiver propagation delay time, low-to-high-level output tPLH 3.7 4.5 ns CL = 10 pF, See Figure 6 6
Receiver propagation delay time, high-to-low-level output tPHL 3.7 4.5 ns CL = 10 pF, See Figure 6 6
Receiver output signal rise time tr 0.7 1.5 ns CL = 10 pF 6
Receiver output signal fall time tf 0.9 1.5 ns CL = 10 pF 6
Supply current, drivers and receivers enabled ICC 12 20 mA Drivers and receivers enabled, no receiver loads, driver RL = 100 Ω 5
Supply current, drivers enabled, receivers disabled ICC 10 16 mA Drivers enabled, receivers disabled, RL = 100 Ω 5
Supply current, drivers disabled, receivers enabled ICC 3 6 mA Drivers disabled, receivers enabled, no loads 5
Supply current, disabled ICC 0.5 1 mA Disabled 5

CAD (KiCad official)

  • Symbol: SN65LVDS050IPWRQ1
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: sn65lvds050ipwrq1-etched.step / sn65lvds050ipwrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65lvds050ipwrq1.step / sn65lvds050ipwrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 9a9545749cad36c8, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF