main
Ray
Publish 0.1.6
77581f8
SN65LVDS050IPWRQ1
Texas Instruments · LVDS ICs · TSSOP-16
SN65LVDS050IPWRQ1 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Receiver 1 inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V. |
| 2 | 1A | input | Receiver 1 non-inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V. |
| 3 | 1R | output | Receiver 1 LVTTL output, high impedance when RE is high and driven low/high by VID with a 50 mV threshold. |
| 4 | RE | input | Active-low receiver enable shared by both receivers; high puts the R outputs in high impedance, with 5-V tolerant LVTTL input (-0.5 V to 6 V). |
| 5 | 2R | output | Receiver 2 LVTTL output, high impedance when RE is high and driven low/high by VID with a 50 mV threshold. |
| 6 | 2A | input | Receiver 2 non-inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V. |
| 7 | 2B | input | Receiver 2 inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | 2D | input | Driver 2 LVTTL data input, 5-V tolerant (-0.5 V to 6 V), with VIH min 2 V and VIL max 0.8 V. |
| 10 | 2Y | output | Driver 2 non-inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V. |
| 11 | 2Z | output | Driver 2 inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V. |
| 12 | DE | input | Driver enable shared by both drivers; low disconnects the input and turns the outputs off, 5-V tolerant LVTTL input (-0.5 V to 6 V). |
| 13 | 1Z | output | Driver 1 inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V. |
| 14 | 1Y | output | Driver 1 non-inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V. |
| 15 | 1D | input | Driver 1 LVTTL data input, 5-V tolerant (-0.5 V to 6 V), with VIH min 2 V and VIL max 0.8 V. |
| 16 | VCC | power_in | Supply voltage, 3 V to 3.6 V recommended (3.3 V nominal), absolute maximum -0.5 V to 4 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 4 | V | 4 | ||
| Voltage range, D, R, DE, RE | -0.5 | 6 | V | 4 | |||
| Voltage range, Y, Z, A, B | -0.5 | 4 | V | 4 | |||
| Differential output voltage | /VOD/ | 1 | V | 4 | |||
| Storage temperature range | -65 | 150 | °C | 4 | |||
| Lead temperature | 250 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 4 | |||
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | 4 | |
| High-level input voltage | VIH | 2 | V | 4 | |||
| Low-level input voltage | VIL | 0.8 | V | 4 | |||
| Magnitude of differential input voltage | /VID/ | 0.1 | 0.6 | V | 4 | ||
| Magnitude of differential output voltage with disabled driver | /VOD(dis)/ | 520 | mV | 4 | |||
| Driver output voltage | VOY or VOZ | 0 | 2.4 | V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Power rating PW(16) | 839 | mW | TA ≤ 25°C | 4 | |||
| Power rating PW(16) at TA = 85°C | 437 | mW | TA = 85°C | 4 | |||
| Derating factor PW(16) | 6.7 | mW/°C | above TA = 25°C | 4 | |||
| Differential output voltage magnitude | /VOD/ | 247 | 340 | 454 | mV | 5 | |
| Change in differential output voltage magnitude between logic states | Δ/VOD/ | -50 | 50 | mV | RL = 100 Ω, See Figure 3 and Figure 2 | 5 | |
| Steady-state common-mode output voltage | VOC(SS) | 1.125 | 1.2 | 1.375 | V | 5 | |
| Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -50 | 50 | mV | See Figure 3 | 5 | |
| Peak-to-peak common-mode output voltage | VOC(PP) | 50 | 150 | mV | 5 | ||
| High-level input current, DE | IIH | -0.5 | -20 | μA | VIH = 5 V | 5 | |
| High-level input current, D | IIH | 2 | 20 | μA | VIH = 5 V | 5 | |
| Low-level input current, DE | IIL | -0.5 | -10 | μA | VIL = 0.8 V | 5 | |
| Low-level input current, D | IIL | 2 | 10 | μA | VIL = 0.8 V | 5 | |
| Short-circuit output current | IOS | 3 | 10 | mA | VOY or VOZ = 0 V | 5 | |
| Off-state output current | IO(OFF) | -1 | 1 | μA | DE = 0 V / DE = VCC; VOY = VOZ = 0 V; VCC < 1.5 V | 5 | |
| Positive-going differential input voltage threshold | VIT+ | 50 | mV | See Figure 5 | 6 | ||
| Negative-going differential input voltage threshold | VIT- | -50 | mV | See Figure 5 | 6 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -8 mA | 6 | ||
| High-level output voltage | VOH | 2.8 | V | IOH = -4 mA | 6 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 8 mA | 6 | ||
| Input current (A or B inputs) | II | -2 | -11 | -20 | μA | VI = 0 | 6 |
| Input current (A or B inputs) | II | -1.2 | -3 | μA | VI = 2.4 V | 6 | |
| Power-off input current (A or B inputs) | II(OFF) | -20 | 20 | μA | VCC = 0 | 6 | |
| High-level input current (enables) | IIH | -10 | 10 | μA | VIH = 5 V | 6 | |
| Low-level input current (enables) | IIL | -10 | 10 | μA | VIL = 0.8 V | 6 | |
| High-impedance output current | IOZ | -10 | 10 | μA | VO = 0 or 5 V | 6 | |
| Driver propagation delay time, low-to-high-level output | tPLH | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 | |
| Driver propagation delay time, high-to-low-level output | tPHL | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 | |
| Driver differential output signal rise time | tr | 0.8 | 1 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 | |
| Driver differential output signal fall time | tf | 0.8 | 1 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 | |
| Enable time | ten | 4.3 | 10 | ns | See Figure 4 | 6 | |
| Disable time | tdis | 3.1 | 10 | ns | See Figure 4 | 6 | |
| Receiver propagation delay time, low-to-high-level output | tPLH | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 6 | 6 | |
| Receiver propagation delay time, high-to-low-level output | tPHL | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 6 | 6 | |
| Receiver output signal rise time | tr | 0.7 | 1.5 | ns | CL = 10 pF | 6 | |
| Receiver output signal fall time | tf | 0.9 | 1.5 | ns | CL = 10 pF | 6 | |
| Supply current, drivers and receivers enabled | ICC | 12 | 20 | mA | Drivers and receivers enabled, no receiver loads, driver RL = 100 Ω | 5 | |
| Supply current, drivers enabled, receivers disabled | ICC | 10 | 16 | mA | Drivers enabled, receivers disabled, RL = 100 Ω | 5 | |
| Supply current, drivers disabled, receivers enabled | ICC | 3 | 6 | mA | Drivers disabled, receivers enabled, no loads | 5 | |
| Supply current, disabled | ICC | 0.5 | 1 | mA | Disabled | 5 |
CAD (KiCad official)
- Symbol:
SN65LVDS050IPWRQ1 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
sn65lvds050ipwrq1-etched.step/sn65lvds050ipwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvds050ipwrq1.step/sn65lvds050ipwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
9a9545749cad36c8, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN65LVDS050IPWRQ1
**Texas Instruments** · LVDS ICs · TSSOP-16
SN65LVDS050IPWRQ1 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Receiver 1 inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V. |
| 2 | 1A | input | Receiver 1 non-inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V. |
| 3 | 1R | output | Receiver 1 LVTTL output, high impedance when RE is high and driven low/high by VID with a 50 mV threshold. |
| 4 | RE | input | Active-low receiver enable shared by both receivers; high puts the R outputs in high impedance, with 5-V tolerant LVTTL input (-0.5 V to 6 V). |
| 5 | 2R | output | Receiver 2 LVTTL output, high impedance when RE is high and driven low/high by VID with a 50 mV threshold. |
| 6 | 2A | input | Receiver 2 non-inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V. |
| 7 | 2B | input | Receiver 2 inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | 2D | input | Driver 2 LVTTL data input, 5-V tolerant (-0.5 V to 6 V), with VIH min 2 V and VIL max 0.8 V. |
| 10 | 2Y | output | Driver 2 non-inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V. |
| 11 | 2Z | output | Driver 2 inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V. |
| 12 | DE | input | Driver enable shared by both drivers; low disconnects the input and turns the outputs off, 5-V tolerant LVTTL input (-0.5 V to 6 V). |
| 13 | 1Z | output | Driver 1 inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V. |
| 14 | 1Y | output | Driver 1 non-inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V. |
| 15 | 1D | input | Driver 1 LVTTL data input, 5-V tolerant (-0.5 V to 6 V), with VIH min 2 V and VIL max 0.8 V. |
| 16 | VCC | power_in | Supply voltage, 3 V to 3.6 V recommended (3.3 V nominal), absolute maximum -0.5 V to 4 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | | 4 | V | | 4 |
| Voltage range, D, R, DE, RE | | -0.5 | | 6 | V | | 4 |
| Voltage range, Y, Z, A, B | | -0.5 | | 4 | V | | 4 |
| Differential output voltage | /VOD/ | | | 1 | V | | 4 |
| Storage temperature range | | -65 | | 150 | °C | | 4 |
| Lead temperature | | | | 250 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 4 |
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | | 4 |
| High-level input voltage | VIH | 2 | | | V | | 4 |
| Low-level input voltage | VIL | | | 0.8 | V | | 4 |
| Magnitude of differential input voltage | /VID/ | 0.1 | | 0.6 | V | | 4 |
| Magnitude of differential output voltage with disabled driver | /VOD(dis)/ | | | 520 | mV | | 4 |
| Driver output voltage | VOY or VOZ | 0 | | 2.4 | V | | 4 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |
| Power rating PW(16) | | | | 839 | mW | TA ≤ 25°C | 4 |
| Power rating PW(16) at TA = 85°C | | | | 437 | mW | TA = 85°C | 4 |
| Derating factor PW(16) | | | 6.7 | | mW/°C | above TA = 25°C | 4 |
| Differential output voltage magnitude | /VOD/ | 247 | 340 | 454 | mV | | 5 |
| Change in differential output voltage magnitude between logic states | Δ/VOD/ | -50 | | 50 | mV | RL = 100 Ω, See Figure 3 and Figure 2 | 5 |
| Steady-state common-mode output voltage | VOC(SS) | 1.125 | 1.2 | 1.375 | V | | 5 |
| Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -50 | | 50 | mV | See Figure 3 | 5 |
| Peak-to-peak common-mode output voltage | VOC(PP) | | 50 | 150 | mV | | 5 |
| High-level input current, DE | IIH | | -0.5 | -20 | μA | VIH = 5 V | 5 |
| High-level input current, D | IIH | | 2 | 20 | μA | VIH = 5 V | 5 |
| Low-level input current, DE | IIL | | -0.5 | -10 | μA | VIL = 0.8 V | 5 |
| Low-level input current, D | IIL | | 2 | 10 | μA | VIL = 0.8 V | 5 |
| Short-circuit output current | IOS | | 3 | 10 | mA | VOY or VOZ = 0 V | 5 |
| Off-state output current | IO(OFF) | -1 | | 1 | μA | DE = 0 V / DE = VCC; VOY = VOZ = 0 V; VCC < 1.5 V | 5 |
| Positive-going differential input voltage threshold | VIT+ | | | 50 | mV | See Figure 5 | 6 |
| Negative-going differential input voltage threshold | VIT- | -50 | | | mV | See Figure 5 | 6 |
| High-level output voltage | VOH | 2.4 | | | V | IOH = -8 mA | 6 |
| High-level output voltage | VOH | 2.8 | | | V | IOH = -4 mA | 6 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = 8 mA | 6 |
| Input current (A or B inputs) | II | -2 | -11 | -20 | μA | VI = 0 | 6 |
| Input current (A or B inputs) | II | | -1.2 | -3 | μA | VI = 2.4 V | 6 |
| Power-off input current (A or B inputs) | II(OFF) | -20 | | 20 | μA | VCC = 0 | 6 |
| High-level input current (enables) | IIH | -10 | | 10 | μA | VIH = 5 V | 6 |
| Low-level input current (enables) | IIL | -10 | | 10 | μA | VIL = 0.8 V | 6 |
| High-impedance output current | IOZ | -10 | | 10 | μA | VO = 0 or 5 V | 6 |
| Driver propagation delay time, low-to-high-level output | tPLH | | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 |
| Driver propagation delay time, high-to-low-level output | tPHL | | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 |
| Driver differential output signal rise time | tr | | 0.8 | 1 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 |
| Driver differential output signal fall time | tf | | 0.8 | 1 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 |
| Enable time | ten | | 4.3 | 10 | ns | See Figure 4 | 6 |
| Disable time | tdis | | 3.1 | 10 | ns | See Figure 4 | 6 |
| Receiver propagation delay time, low-to-high-level output | tPLH | | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 6 | 6 |
| Receiver propagation delay time, high-to-low-level output | tPHL | | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 6 | 6 |
| Receiver output signal rise time | tr | | 0.7 | 1.5 | ns | CL = 10 pF | 6 |
| Receiver output signal fall time | tf | | 0.9 | 1.5 | ns | CL = 10 pF | 6 |
| Supply current, drivers and receivers enabled | ICC | | 12 | 20 | mA | Drivers and receivers enabled, no receiver loads, driver RL = 100 Ω | 5 |
| Supply current, drivers enabled, receivers disabled | ICC | | 10 | 16 | mA | Drivers enabled, receivers disabled, RL = 100 Ω | 5 |
| Supply current, drivers disabled, receivers enabled | ICC | | 3 | 6 | mA | Drivers disabled, receivers enabled, no loads | 5 |
| Supply current, disabled | ICC | | 0.5 | 1 | mA | Disabled | 5 |
## CAD (KiCad official)
- Symbol: `SN65LVDS050IPWRQ1`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `sn65lvds050ipwrq1-etched.step` / `sn65lvds050ipwrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65lvds050ipwrq1.step` / `sn65lvds050ipwrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn65lvds051-q1) (29 pp, sha256 `9a9545749cad36c8`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn65lvds050ipwrq1-datasheet.pdf)