main
Ray Publish 0.1.6 77581f8
{
  "slug": "sn65lvds050ipwrq1",
  "version": "0.1.6",
  "type": "component",
  "description": "Texas Instruments LVDS ICs, TSSOP-16. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "sn65lvds050ipwrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn65lvds050ipwrq1.kicad_sym",
    "sn65lvds050ipwrq1.kicad_mod",
    "sn65lvds050ipwrq1.glb",
    "sn65lvds050ipwrq1.step",
    "sn65lvds050ipwrq1.lbr",
    "docs/hero.png",
    "docs/sn65lvds050ipwrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn65lvds050ipwrq1-hero.glb",
    "sn65lvds050ipwrq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "SN65LVDS050IPWRQ1",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "LVDS ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/sn65lvds051-q1",
    "parts": {
      "symbol": "sn65lvds050ipwrq1.kicad_sym",
      "footprint": "sn65lvds050ipwrq1.kicad_mod",
      "model_3d": "sn65lvds050ipwrq1-hero.glb",
      "model_3d_plain": "sn65lvds050ipwrq1.glb",
      "model_3d_step": "sn65lvds050ipwrq1-etched.step",
      "model_3d_step_plain": "sn65lvds050ipwrq1.step",
      "lbr": "sn65lvds050ipwrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2671514",
      "digikey": "296-30094-2-ND",
      "mouser": "595-N65LVDS050IPWRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-11-17T06:07:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-30094-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-N65LVDS050IPWRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "1B",
        "type": "input",
        "description": "Receiver 1 inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V."
      },
      {
        "number": "2",
        "name": "1A",
        "type": "input",
        "description": "Receiver 1 non-inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V."
      },
      {
        "number": "3",
        "name": "1R",
        "type": "output",
        "description": "Receiver 1 LVTTL output, high impedance when RE is high and driven low/high by VID with a 50 mV threshold."
      },
      {
        "number": "4",
        "name": "RE",
        "type": "input",
        "description": "Active-low receiver enable shared by both receivers; high puts the R outputs in high impedance, with 5-V tolerant LVTTL input (-0.5 V to 6 V)."
      },
      {
        "number": "5",
        "name": "2R",
        "type": "output",
        "description": "Receiver 2 LVTTL output, high impedance when RE is high and driven low/high by VID with a 50 mV threshold."
      },
      {
        "number": "6",
        "name": "2A",
        "type": "input",
        "description": "Receiver 2 non-inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V."
      },
      {
        "number": "7",
        "name": "2B",
        "type": "input",
        "description": "Receiver 2 inverting differential line input, with common-mode range up to VCC-0.8 V and absolute maximum -0.5 V to 4 V."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "9",
        "name": "2D",
        "type": "input",
        "description": "Driver 2 LVTTL data input, 5-V tolerant (-0.5 V to 6 V), with VIH min 2 V and VIL max 0.8 V."
      },
      {
        "number": "10",
        "name": "2Y",
        "type": "output",
        "description": "Driver 2 non-inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V."
      },
      {
        "number": "11",
        "name": "2Z",
        "type": "output",
        "description": "Driver 2 inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V."
      },
      {
        "number": "12",
        "name": "DE",
        "type": "input",
        "description": "Driver enable shared by both drivers; low disconnects the input and turns the outputs off, 5-V tolerant LVTTL input (-0.5 V to 6 V)."
      },
      {
        "number": "13",
        "name": "1Z",
        "type": "output",
        "description": "Driver 1 inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V."
      },
      {
        "number": "14",
        "name": "1Y",
        "type": "output",
        "description": "Driver 1 non-inverting LVDS output, about 340 mV typical differential into 100 ohm, absolute maximum -0.5 V to 4 V."
      },
      {
        "number": "15",
        "name": "1D",
        "type": "input",
        "description": "Driver 1 LVTTL data input, 5-V tolerant (-0.5 V to 6 V), with VIH min 2 V and VIL max 0.8 V."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, 3 V to 3.6 V recommended (3.3 V nominal), absolute maximum -0.5 V to 4 V."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/sn65lvds051-q1",
        "pages": 29,
        "sha256": "9a9545749cad36c8",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn65lvds050ipwrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn65lvds050ipwrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5d0bbae24e8b70f7a6f2417d1823188b747f8057b6c1cb507078f6ba07d4f84a",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PW0016A",
      "source_page": 23,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          4.9,
          5.1
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          6.2,
          6.6
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "sn65lvds050ipwrq1.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}