Generated by kicad-footprint-generator · KiCad file format 20260206
SN65C3238DBR
Texas Instruments · RS232 ICs · SSOP-28-208mil
SN65C3238DBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C2+ | passive | Positive terminal of the C2 charge-pump capacitor, which is one of the four external 0.1 µF to 1 µF capacitors required for the charge pump. |
| 2 | GND | power_in | Network ground; all voltages in the datasheet are referenced to network GND. |
| 3 | C2− | passive | Negative terminal of the C2 charge-pump capacitor, connected to the external charge-pump capacitor network. |
| 4 | V− | power_out | Negative charge-pump output supply for the RS-232 drivers; absolute maximum range is 0.3 V to −7 V with respect to network GND. |
| 5 | DOUT1 | output | RS-232 driver output 1 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins. |
| 6 | DOUT2 | output | RS-232 driver output 2 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins. |
| 7 | DOUT3 | output | RS-232 driver output 3 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins. |
| 8 | RIN1 | input | RS-232 receiver input 1 accepting ±25 V with a nominal input resistance of 3 kΩ to 7 kΩ. |
| 9 | RIN2 | input | RS-232 receiver input 2 accepting ±25 V with a nominal input resistance of 3 kΩ to 7 kΩ. |
| 10 | DOUT4 | output | RS-232 driver output 4 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins. |
| 11 | RIN3 | input | RS-232 receiver input 3 accepting ±25 V with a nominal input resistance of 3 kΩ to 7 kΩ. |
| 12 | DOUT5 | output | RS-232 driver output 5 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins. |
| 13 | FORCEON | input | Auto-powerdown plus control input; with FORCEOFF high, a low level here enables auto-powerdown plus and a high level disables it, with VIL max 0.8 V and VIH min 2 V (3.3 V) or 2.4 V (5 V) and an input range of 0 V to 5.5 V. |
| 14 | FORCEOFF | input | Driver and charge-pump shutdown input; a low level powers off the drivers and charge pump (DOUT high impedance), with VIL max 0.8 V and an input range of 0 V to 5.5 V. |
| 15 | INVALID | output | Receiver-validity output that is high when any receiver input is above 2.7 V or below −2.7 V (or has been between −0.3 V and 0.3 V for less than 30 µs) and low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs. |
| 16 | ROUT1B | output | Always-active noninverting receiver output that remains operational while the device is powered down, for ring-indicator use; its output leakage is excluded from the normal ROUT leakage specification. |
| 17 | DIN5 | input | Driver input 5 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V. |
| 18 | ROUT3 | output | Receiver output 3 (logic level); VOH is at least VCC − 0.6 V at −1 mA and VOL is at most 0.4 V at 1.6 mA. |
| 19 | DIN4 | input | Driver input 4 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V. |
| 20 | ROUT2 | output | Receiver output 2 (logic level); VOH is at least VCC − 0.6 V at −1 mA and VOL is at most 0.4 V at 1.6 mA. |
| 21 | ROUT1 | output | Receiver output 1 (logic level); VOH is at least VCC − 0.6 V at −1 mA and VOL is at most 0.4 V at 1.6 mA. |
| 22 | DIN3 | input | Driver input 3 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V. |
| 23 | DIN2 | input | Driver input 2 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V. |
| 24 | DIN1 | input | Driver input 1 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V. |
| 25 | C1− | passive | Negative terminal of the C1 charge-pump capacitor, one of the four external 0.1 µF to 1 µF capacitors. |
| 26 | VCC | power_in | Single supply input, operating from 3 V to 5.5 V (3.3 V ±0.3 V or 5 V ±0.5 V recommended), with absolute maximum −0.3 V to 6 V. |
| 27 | V+ | power_out | Positive charge-pump output supply for the RS-232 drivers; absolute maximum range is −0.3 V to 7 V with respect to network GND. |
| 28 | C1+ | passive | Positive terminal of the C1 charge-pump capacitor, one of the four external 0.1 µF to 1 µF capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
SN65C3238DBR - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
sn65c3238dbr-etched.step/sn65c3238dbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65c3238dbr.step/sn65c3238dbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
74ffdff42dc51b15, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).