main
Ray Set visibility: public 57393f5
{
  "schema_version": 1,
  "type": "component",
  "slug": "sn65c3238dbr",
  "title": "SN65C3238DBR",
  "brief": "Texas Instruments RS232 ICs, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "sn65c3238dbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "SN65C3238DBR",
    "manufacturer": "Texas Instruments",
    "package": "SSOP-28-208mil",
    "pin_count": 28,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/sn75c3238",
    "parts": {
      "symbol": "sn65c3238dbr.kicad_sym",
      "footprint": "sn65c3238dbr.kicad_mod",
      "model_3d": "sn65c3238dbr-hero.glb",
      "model_3d_plain": "sn65c3238dbr.glb",
      "model_3d_step": "sn65c3238dbr-etched.step",
      "model_3d_step_plain": "sn65c3238dbr.step",
      "lbr": "sn65c3238dbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2868855",
      "digikey": "296-12733-2-ND",
      "mouser": "595-SN65C3238DBR"
    },
    "distributor_check": {
      "checked_at": "2026-10-12T10:12:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-12733-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-SN65C3238DBR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of the C2 charge-pump capacitor, which is one of the four external 0.1 µF to 1 µF capacitors required for the charge pump."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Network ground; all voltages in the datasheet are referenced to network GND."
      },
      {
        "number": "3",
        "name": "C2−",
        "type": "passive",
        "description": "Negative terminal of the C2 charge-pump capacitor, connected to the external charge-pump capacitor network."
      },
      {
        "number": "4",
        "name": "V−",
        "type": "power_out",
        "description": "Negative charge-pump output supply for the RS-232 drivers; absolute maximum range is 0.3 V to −7 V with respect to network GND."
      },
      {
        "number": "5",
        "name": "DOUT1",
        "type": "output",
        "description": "RS-232 driver output 1 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins."
      },
      {
        "number": "6",
        "name": "DOUT2",
        "type": "output",
        "description": "RS-232 driver output 2 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins."
      },
      {
        "number": "7",
        "name": "DOUT3",
        "type": "output",
        "description": "RS-232 driver output 3 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins."
      },
      {
        "number": "8",
        "name": "RIN1",
        "type": "input",
        "description": "RS-232 receiver input 1 accepting ±25 V with a nominal input resistance of 3 kΩ to 7 kΩ."
      },
      {
        "number": "9",
        "name": "RIN2",
        "type": "input",
        "description": "RS-232 receiver input 2 accepting ±25 V with a nominal input resistance of 3 kΩ to 7 kΩ."
      },
      {
        "number": "10",
        "name": "DOUT4",
        "type": "output",
        "description": "RS-232 driver output 4 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins."
      },
      {
        "number": "11",
        "name": "RIN3",
        "type": "input",
        "description": "RS-232 receiver input 3 accepting ±25 V with a nominal input resistance of 3 kΩ to 7 kΩ."
      },
      {
        "number": "12",
        "name": "DOUT5",
        "type": "output",
        "description": "RS-232 driver output 5 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins."
      },
      {
        "number": "13",
        "name": "FORCEON",
        "type": "input",
        "description": "Auto-powerdown plus control input; with FORCEOFF high, a low level here enables auto-powerdown plus and a high level disables it, with VIL max 0.8 V and VIH min 2 V (3.3 V) or 2.4 V (5 V) and an input range of 0 V to 5.5 V."
      },
      {
        "number": "14",
        "name": "FORCEOFF",
        "type": "input",
        "description": "Driver and charge-pump shutdown input; a low level powers off the drivers and charge pump (DOUT high impedance), with VIL max 0.8 V and an input range of 0 V to 5.5 V."
      },
      {
        "number": "15",
        "name": "INVALID",
        "type": "output",
        "description": "Receiver-validity output that is high when any receiver input is above 2.7 V or below −2.7 V (or has been between −0.3 V and 0.3 V for less than 30 µs) and low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs."
      },
      {
        "number": "16",
        "name": "ROUT1B",
        "type": "output",
        "description": "Always-active noninverting receiver output that remains operational while the device is powered down, for ring-indicator use; its output leakage is excluded from the normal ROUT leakage specification."
      },
      {
        "number": "17",
        "name": "DIN5",
        "type": "input",
        "description": "Driver input 5 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V."
      },
      {
        "number": "18",
        "name": "ROUT3",
        "type": "output",
        "description": "Receiver output 3 (logic level); VOH is at least VCC − 0.6 V at −1 mA and VOL is at most 0.4 V at 1.6 mA."
      },
      {
        "number": "19",
        "name": "DIN4",
        "type": "input",
        "description": "Driver input 4 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V."
      },
      {
        "number": "20",
        "name": "ROUT2",
        "type": "output",
        "description": "Receiver output 2 (logic level); VOH is at least VCC − 0.6 V at −1 mA and VOL is at most 0.4 V at 1.6 mA."
      },
      {
        "number": "21",
        "name": "ROUT1",
        "type": "output",
        "description": "Receiver output 1 (logic level); VOH is at least VCC − 0.6 V at −1 mA and VOL is at most 0.4 V at 1.6 mA."
      },
      {
        "number": "22",
        "name": "DIN3",
        "type": "input",
        "description": "Driver input 3 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V."
      },
      {
        "number": "23",
        "name": "DIN2",
        "type": "input",
        "description": "Driver input 2 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V."
      },
      {
        "number": "24",
        "name": "DIN1",
        "type": "input",
        "description": "Driver input 1 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V."
      },
      {
        "number": "25",
        "name": "C1−",
        "type": "passive",
        "description": "Negative terminal of the C1 charge-pump capacitor, one of the four external 0.1 µF to 1 µF capacitors."
      },
      {
        "number": "26",
        "name": "VCC",
        "type": "power_in",
        "description": "Single supply input, operating from 3 V to 5.5 V (3.3 V ±0.3 V or 5 V ±0.5 V recommended), with absolute maximum −0.3 V to 6 V."
      },
      {
        "number": "27",
        "name": "V+",
        "type": "power_out",
        "description": "Positive charge-pump output supply for the RS-232 drivers; absolute maximum range is −0.3 V to 7 V with respect to network GND."
      },
      {
        "number": "28",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of the C1 charge-pump capacitor, one of the four external 0.1 µF to 1 µF capacitors."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Charge-pump capacitor terminals (C1+, C1−, C2+, C2−) are typed as passive because the datasheet only; V− and V+ are charge-pump generated supply outputs; typed as power_out based on the 'output supply v; Pin numbers and names were read from the top-view pin list in the extracted text (left column 1–14, "
        ],
        "pages_sent": 22,
        "cost_usd": 0.1034,
        "at": "2026-10-12T10:12:03"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/sn75c3238",
        "pages": 22,
        "sha256": "74ffdff42dc51b15",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn65c3238dbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn65c3238dbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "e814073dbf421da0f1aba2ddf7a24d745d43cd46eba82635c174b8ff794d2fc0",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SSOP-28-208mil",
      "Category": "Interface",
      "Pins": "28"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sn65c3238dbr"
  ],
  "discovery_pitch": "SN65C3238DBR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn65c3238dbr.kicad_sym",
    "sn65c3238dbr.kicad_mod",
    "sn65c3238dbr.glb",
    "sn65c3238dbr.step",
    "sn65c3238dbr.lbr",
    "docs/hero.png",
    "docs/sn65c3238dbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn65c3238dbr-hero.glb",
    "sn65c3238dbr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}