main
Ray
Publish 0.1.0
72cebd6
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314
{
"slug": "sn65c3238dbr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments RS232 ICs, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"sn65c3238dbr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sn65c3238dbr.kicad_sym",
"sn65c3238dbr.kicad_mod",
"sn65c3238dbr.glb",
"sn65c3238dbr.step",
"sn65c3238dbr.lbr",
"docs/hero.png",
"docs/sn65c3238dbr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"sn65c3238dbr-hero.glb",
"sn65c3238dbr-hero.overlay.json"
],
"component": {
"mpn": "SN65C3238DBR",
"manufacturer": "Texas Instruments",
"package": "SSOP-28-208mil",
"pin_count": 28,
"category": "Interface",
"subcategory": "RS232 ICs",
"datasheet": "https://www.ti.com/cn/lit/gpn/sn75c3238",
"parts": {
"symbol": "sn65c3238dbr.kicad_sym",
"footprint": "sn65c3238dbr.kicad_mod",
"model_3d": "sn65c3238dbr-hero.glb",
"model_3d_plain": "sn65c3238dbr.glb",
"model_3d_step": "sn65c3238dbr-etched.step",
"model_3d_step_plain": "sn65c3238dbr.step",
"lbr": "sn65c3238dbr.lbr"
},
"distributor_links": {
"lcsc": "C2868855",
"digikey": "296-12733-2-ND",
"mouser": "595-SN65C3238DBR"
},
"distributor_check": {
"checked_at": "2026-10-12T10:12:21Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-12733-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-SN65C3238DBR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "C2+",
"type": "passive",
"description": "Positive terminal of the C2 charge-pump capacitor, which is one of the four external 0.1 µF to 1 µF capacitors required for the charge pump."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Network ground; all voltages in the datasheet are referenced to network GND."
},
{
"number": "3",
"name": "C2−",
"type": "passive",
"description": "Negative terminal of the C2 charge-pump capacitor, connected to the external charge-pump capacitor network."
},
{
"number": "4",
"name": "V−",
"type": "power_out",
"description": "Negative charge-pump output supply for the RS-232 drivers; absolute maximum range is 0.3 V to −7 V with respect to network GND."
},
{
"number": "5",
"name": "DOUT1",
"type": "output",
"description": "RS-232 driver output 1 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins."
},
{
"number": "6",
"name": "DOUT2",
"type": "output",
"description": "RS-232 driver output 2 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins."
},
{
"number": "7",
"name": "DOUT3",
"type": "output",
"description": "RS-232 driver output 3 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins."
},
{
"number": "8",
"name": "RIN1",
"type": "input",
"description": "RS-232 receiver input 1 accepting ±25 V with a nominal input resistance of 3 kΩ to 7 kΩ."
},
{
"number": "9",
"name": "RIN2",
"type": "input",
"description": "RS-232 receiver input 2 accepting ±25 V with a nominal input resistance of 3 kΩ to 7 kΩ."
},
{
"number": "10",
"name": "DOUT4",
"type": "output",
"description": "RS-232 driver output 4 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins."
},
{
"number": "11",
"name": "RIN3",
"type": "input",
"description": "RS-232 receiver input 3 accepting ±25 V with a nominal input resistance of 3 kΩ to 7 kΩ."
},
{
"number": "12",
"name": "DOUT5",
"type": "output",
"description": "RS-232 driver output 5 on the serial-port bus; driven to at least ±5 V into a 3 kΩ load, with ±15 kV HBM ESD protection on bus pins."
},
{
"number": "13",
"name": "FORCEON",
"type": "input",
"description": "Auto-powerdown plus control input; with FORCEOFF high, a low level here enables auto-powerdown plus and a high level disables it, with VIL max 0.8 V and VIH min 2 V (3.3 V) or 2.4 V (5 V) and an input range of 0 V to 5.5 V."
},
{
"number": "14",
"name": "FORCEOFF",
"type": "input",
"description": "Driver and charge-pump shutdown input; a low level powers off the drivers and charge pump (DOUT high impedance), with VIL max 0.8 V and an input range of 0 V to 5.5 V."
},
{
"number": "15",
"name": "INVALID",
"type": "output",
"description": "Receiver-validity output that is high when any receiver input is above 2.7 V or below −2.7 V (or has been between −0.3 V and 0.3 V for less than 30 µs) and low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs."
},
{
"number": "16",
"name": "ROUT1B",
"type": "output",
"description": "Always-active noninverting receiver output that remains operational while the device is powered down, for ring-indicator use; its output leakage is excluded from the normal ROUT leakage specification."
},
{
"number": "17",
"name": "DIN5",
"type": "input",
"description": "Driver input 5 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V."
},
{
"number": "18",
"name": "ROUT3",
"type": "output",
"description": "Receiver output 3 (logic level); VOH is at least VCC − 0.6 V at −1 mA and VOL is at most 0.4 V at 1.6 mA."
},
{
"number": "19",
"name": "DIN4",
"type": "input",
"description": "Driver input 4 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V."
},
{
"number": "20",
"name": "ROUT2",
"type": "output",
"description": "Receiver output 2 (logic level); VOH is at least VCC − 0.6 V at −1 mA and VOL is at most 0.4 V at 1.6 mA."
},
{
"number": "21",
"name": "ROUT1",
"type": "output",
"description": "Receiver output 1 (logic level); VOH is at least VCC − 0.6 V at −1 mA and VOL is at most 0.4 V at 1.6 mA."
},
{
"number": "22",
"name": "DIN3",
"type": "input",
"description": "Driver input 3 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V."
},
{
"number": "23",
"name": "DIN2",
"type": "input",
"description": "Driver input 2 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V."
},
{
"number": "24",
"name": "DIN1",
"type": "input",
"description": "Driver input 1 (TTL/CMOS logic); accepts 5 V logic levels with a 3.3 V supply, VIL max 0.8 V and an input range of 0 V to 5.5 V."
},
{
"number": "25",
"name": "C1−",
"type": "passive",
"description": "Negative terminal of the C1 charge-pump capacitor, one of the four external 0.1 µF to 1 µF capacitors."
},
{
"number": "26",
"name": "VCC",
"type": "power_in",
"description": "Single supply input, operating from 3 V to 5.5 V (3.3 V ±0.3 V or 5 V ±0.5 V recommended), with absolute maximum −0.3 V to 6 V."
},
{
"number": "27",
"name": "V+",
"type": "power_out",
"description": "Positive charge-pump output supply for the RS-232 drivers; absolute maximum range is −0.3 V to 7 V with respect to network GND."
},
{
"number": "28",
"name": "C1+",
"type": "passive",
"description": "Positive terminal of the C1 charge-pump capacitor, one of the four external 0.1 µF to 1 µF capacitors."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Charge-pump capacitor terminals (C1+, C1−, C2+, C2−) are typed as passive because the datasheet only; V− and V+ are charge-pump generated supply outputs; typed as power_out based on the 'output supply v; Pin numbers and names were read from the top-view pin list in the extracted text (left column 1–14, "
],
"pages_sent": 22,
"cost_usd": 0.1034,
"at": "2026-10-12T10:12:03"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/sn75c3238",
"pages": 22,
"sha256": "74ffdff42dc51b15",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 28,
"described": 28,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "sn65c3238dbr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
"checked": "2026-10-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sn65c3238dbr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e814073dbf421da0f1aba2ddf7a24d745d43cd46eba82635c174b8ff794d2fc0",
"checked": "2026-10-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}