main
Ray Publish 0.1.0 eae12c2
{
  "slug": "slm6550",
  "version": "0.1.0",
  "type": "component",
  "description": "SOLA-IC Battery Management ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "slm6550",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "slm6550.kicad_sym",
    "slm6550.kicad_mod",
    "slm6550.glb",
    "slm6550.step",
    "slm6550.lbr",
    "docs/hero.png",
    "docs/slm6550-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "slm6550-hero.glb",
    "slm6550-hero.overlay.json",
    "slm6550-etched.glb"
  ],
  "component": {
    "mpn": "SLM6550",
    "manufacturer": "SOLA-IC",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Power Supply Chip",
    "subcategory": "Battery Management ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/3ba8f6eedc6540ac57ce6b4ab7855a49.pdf",
    "parts": {
      "symbol": "slm6550.kicad_sym",
      "footprint": "slm6550.kicad_mod",
      "model_3d": "slm6550-hero.glb",
      "model_3d_plain": "slm6550-etched.glb",
      "model_3d_step": "slm6550-etched.step",
      "model_3d_step_plain": "slm6550.step",
      "lbr": "slm6550.lbr"
    },
    "distributor_links": {
      "lcsc": "C3034702"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T00:53:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the charger."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive input supply voltage that powers the internal circuit; the charger enters low power mode when VCC drops to within 30mV of the BAT pin voltage, dropping IBAT to less than 2μA."
      },
      {
        "number": "3",
        "name": "NCHRG",
        "type": "output",
        "description": "Open-drain charge status output that is pulled low by an internal switch while the battery is charging and is high impedance otherwise."
      },
      {
        "number": "4",
        "name": "NSTDBY",
        "type": "output",
        "description": "Open-drain charge terminated status output that is pulled low by an internal switch to indicate the end of battery charge and is high impedance otherwise."
      },
      {
        "number": "5",
        "name": "TS",
        "type": "input",
        "description": "Chip enable and battery temperature sense input that suspends charging when the voltage is below 45% or above 80% of VIN, and grounding it disables the chip."
      },
      {
        "number": "6",
        "name": "BAT",
        "type": "bidirectional",
        "description": "Battery connection pin that delivers charge current to the battery and regulates it to 4.35V."
      },
      {
        "number": "7",
        "name": "VS",
        "type": "power_in",
        "description": "Charge current sense pin, connected through the program resistor RS to the LX pin to set the charge current."
      },
      {
        "number": "8",
        "name": "LX",
        "type": "output",
        "description": "External inductor connecting pin for the synchronous buck switching node."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table is on page 3 and is not labeled per package. The SOP-8 outline drawing on page 11 is a"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0185,
        "at": "2026-10-28T00:53:24"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/3ba8f6eedc6540ac57ce6b4ab7855a49.pdf",
        "pages": 12,
        "sha256": "7462325598d3bd28",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "slm6550.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "slm6550-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a3443c95398afbe67f5b355920a5d5095521b78cde37e35ca7305358fc9c27ba",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}