main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers slm6550: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
slm6550-etched.glb Publish 0.1.0 · Ray
slm6550-etched.step slm6550: factory component page (tier=lcsc) · Ray
slm6550-hero.glb slm6550: hero GLB from the etched model (keeps the MPN mark) · Ray
slm6550-hero.overlay.json Publish 0.1.0 · Ray
slm6550.glb Publish 0.1.0 · Ray
slm6550.kicad_mod Publish 0.1.0 · Ray
slm6550.kicad_sym Publish 0.1.0 · Ray
slm6550.lbr Publish 0.1.0 · Ray
slm6550.step Publish 0.1.0 · Ray

SLM6550

SOLA-IC · Battery Management ICs · SOP-8

SLM6550 from SOLA-IC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference pin for the charger.
2 VCC power_in Positive input supply voltage that powers the internal circuit; the charger enters low power mode when VCC drops to within 30mV of the BAT pin voltage, dropping IBAT to less than 2μA.
3 NCHRG output Open-drain charge status output that is pulled low by an internal switch while the battery is charging and is high impedance otherwise.
4 NSTDBY output Open-drain charge terminated status output that is pulled low by an internal switch to indicate the end of battery charge and is high impedance otherwise.
5 TS input Chip enable and battery temperature sense input that suspends charging when the voltage is below 45% or above 80% of VIN, and grounding it disables the chip.
6 BAT bidirectional Battery connection pin that delivers charge current to the battery and regulates it to 4.35V.
7 VS power_in Charge current sense pin, connected through the program resistor RS to the LX pin to set the charge current.
8 LX output External inductor connecting pin for the synchronous buck switching node.

Key specifications

Parameter Value
Manufacturer SOLA-IC
Package SOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VIN 3.8 5 6 V 4
Input supply current, charge mode ICC 250 500 uA Charge mode 4
Input supply current, standby mode (charge ends) ICC 140 280 uA Standby mode (charge ends) 4
Input supply current, shutdown mode ICC 140 280 uA Shutdown mode (RS not connected, VIN<VBAT or VIN<VUV) 4
Regulated output voltage VFLOAL 4.307 4.35 4.393 V 0℃≤TA≤85℃ 4
BAT pin current, RS=0.1Ω IBAT 900 1000 1100 mA RS=0.1Ω,current mode 4
BAT pin current, RS=0.05Ω IBAT 1800 2000 2200 mA RS=0.05Ω,current mode 4
BAT pin current, standby mode IBAT 0 -3 -5 uA Standby mode,VBAT=4.35V 4
BAT pin current, shutdown mode IBAT -2 2 uA Shutdown mode (RPROG not connected) 4
Trickle charge current ITRIKL 180 200 220 mA VBAT<VTRIKL,RPROG=0.05Ω 4
Trickle charge threshold voltage VTRIKL 2.8 2.9 3 V RS=0.05Ω,VBAT rising 4
Trickle charge hysteresis voltage VTRHYS 60 80 100 mV RS=0.05Ω 5
VCC under voltage lockout threshold VUV 3.6 3.7 3.9 V VIN from low to high 5
VCC under voltage lockout hysteresis VUVHYS 150 200 300 mV 5
VCC-VBAT lockout threshold voltage VASD 120 200 300 mV VIN from low to high 5
VCC-VBAT lockout hysteresis (unlabelled row) 20 45 80 mV VIN from low to high 5
C/10 termination current threshold, RS=0.1Ω ITERM 100 mA RS=0.1Ω 5
C/10 termination current threshold, RS=0.05Ω ITERM 200 mA RS=0.05Ω 5
NCHRG pin output low voltage VNCHRG 0.3 0.6 V INCHRG=5mA 5
NSTDBY pin output low voltage VNSTDBY 0.3 0.6 V INSTDBY=5mA 5
The voltage at TS increase VTS_H 80 82 %VIN 5
The voltage at TS decrease VTS_L 43 45 %VIN 5
Recharge battery threshold voltage ΔVRECHRG 50 100 150 mV VFLOAT-VRECHRG 5
Switching frequency FREQ 1.3 1.5 1.7 MHz 5
Thermal protection temperature TLIM 145 ℃ 5
The on-resistance of P-FET RPFET 150 mΩ 5
The on-resistance of N-FET RNFET 120 mΩ 5
Soft-start time tSS 20 us IBAT=0 to IBAT=1200V/RPROG 5
Recharge comparator filter time tRECHRG 0.8 1.8 4 ms VBAT from high to low 5
Termination comparator filter time tTERM 0.8 1.8 4 ms IBAT below ICHRG/10 5
Input voltage VIN absolute maximum VIN -0.3 6.5 V 1
BAT absolute maximum BAT -0.3 7 V 1
LX absolute maximum LX -0.3 7 V 1
VS absolute maximum VS -0.3 7 V 1
NCHRG absolute maximum NCHRG -0.3 8 V 1
NSTDBY absolute maximum NSTDBY -0.3 8 V 1
TS absolute maximum TS -0.3 8 V 1
Maximum junction temperature 145 ℃ 1
Storage temperature range -65 125 ℃ 1
Lead temperature (soldering) 260 ℃ Soldering, 10 sec 1
Operating temperature range -40 85 ℃ 1

CAD (KiCad official)

  • Symbol: SLM6550
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: slm6550-etched.step / slm6550-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); slm6550.step / slm6550.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SOLA-IC datasheet (12 pp, sha256 7462325598d3bd28, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF