main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers s25fl256sagnfi001: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
s25fl256sagnfi001-etched.glb Publish 0.1.0 · Ray
s25fl256sagnfi001-etched.step s25fl256sagnfi001: factory component page (tier=lcsc) · Ray
s25fl256sagnfi001-hero.glb s25fl256sagnfi001: hero GLB from the etched model (keeps the MPN mark) · Ray
s25fl256sagnfi001-hero.overlay.json Publish 0.1.0 · Ray
s25fl256sagnfi001.glb Publish 0.1.0 · Ray
s25fl256sagnfi001.kicad_mod Publish 0.1.0 · Ray
s25fl256sagnfi001.kicad_sym Publish 0.1.0 · Ray
s25fl256sagnfi001.lbr Publish 0.1.0 · Ray
s25fl256sagnfi001.step Publish 0.1.0 · Ray

S25FL256SAGNFI001

Cypress Semicon · NOR FLASH · WSON-8-EP(6x8)

S25FL256SAGNFI001 from Cypress Semicon, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input that frames each SPI command; driving CS# high ends a command sequence such as RDID.
2 SO/IO1 bidirectional Serial Output in single-bit mode and IO1 in dual/quad modes; high impedance when not driving data.
3 WP#/IO2 bidirectional Write Protect input that, when LOW with SRWD set, locks the Status Register, BP and configuration register bits; serves as IO2 in quad mode.
4 VSS power_in Common ground reference for the device core, input receivers and output drivers.
5 SI/IO0 bidirectional Serial Input for commands, addresses and data in single-bit mode, and IO0 in dual/quad modes.
6 SCK input Serial Clock input supporting SPI clock modes 0 and 3.
7 HOLD#/IO3 bidirectional Hold input in single/dual modes and IO3 in quad mode.
8 VCC power_in Core supply voltage for all internal logic, 2.7V to 3.6V; VIO and RESET# are tied to VCC internally in this package.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Cypress Semicon
Package WSON-8-EP(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature, plastic packages -65 150 °C 23
Ambient temperature with power applied -65 125 °C 23
Core supply voltage VCC -0.5 4 V 23
Output short circuit current 100 mA No more than one output shorted at a time, not longer than one second 23
Supply voltage VCC 2.7 3.6 V 23
Ambient temperature, Industrial TA -40 85 °C Industrial (I) 23
Thermal resistance junction to ambient Theta JA 27 °C/W S25FL256, WNG008 23
VCC minimum operation voltage VCC (min) 2.7 V 25
VCC cut-off where re-initialization is needed VCC (cut-off) 2.4 V 25
VCC low voltage for initialization to occur VCC (low) 1.6 V 2.3 V min at Embedded 25
VCC (min) to read operation tPU 300 µs 25
VCC (low) time tPD 15 µs 25
Input low voltage VIL -0.5 V max is 0.2 x VIO 26
Input leakage current ILI -2 2 µA VCC = VCC Max, VIN = VIH or VIL 26
Output leakage current ILO -2 2 µA VCC = VCC Max, VIN = VIH or VIL 26
Active read current, Serial SDR 50 MHz ICC1 16 mA Outputs unconnected during read data return 26
Active read current, Serial SDR 133 MHz ICC1 33 mA Outputs unconnected during read data return 26
Active read current, Quad SDR 80 MHz ICC1 50 mA Outputs unconnected during read data return 26
Active read current, Quad SDR 104 MHz ICC1 61 mA Outputs unconnected during read data return 26
Active read current, Quad DDR 66 MHz ICC1 75 mA Outputs unconnected during read data return 26
Active read current, Quad DDR 80 MHz ICC1 90 mA Outputs unconnected during read data return 26
Active current (Page Program) ICC2 100 mA CS# = VIO 26
Active current (WRR) ICC3 100 mA CS# = VIO 26
Active current (SE) ICC4 100 mA CS# = VIO 26
Active current (BE) ICC5 100 mA CS# = VIO 26
Standby current (Industrial) ISB 70 100 µA RESET#, CS# = VIO; SI, SCK = VIO or VSS, Industrial Temp 26
Input capacitance CIN 8 pF 1 MHz; applies to SCK, CS#, RESET# 29
Output capacitance COUT 8 pF 1 MHz; applies to all I/O 29
SCK clock frequency for READ and 4READ FSCK, R 0 50 MHz VIO = VCC 2.7V to 3.6V; min printed DC 31
SCK clock frequency for single commands FSCK, C 0 133 MHz VIO = VCC 2.7V to 3.6V; min printed DC 31
SCK clock frequency for dual and quad commands FSCK, C 0 104 MHz DOR, 4DOR, QOR, 4QOR, DIOR, 4DIOR, QIOR, 4QIOR; min printed DC 31
SCK clock frequency for QPP, 4QPP FSCK, QPP 0 80 MHz min printed DC 31
Clock rise time (slew rate) tCRT, tCLCH 0.1 V/ns 31
Clock fall time (slew rate) tCFT, tCHCL 0.1 V/ns 31
CS# high time (read instructions) tCS 10 ns Read Instructions 31
CS# high time (program/erase) tCS 50 ns Program/Erase 31
CS# active setup time tCSS 3 ns relative to SCK 31
CS# active hold time tCSH 3 ns relative to SCK 31
Data in setup time tSU 1.5 3000 ns Max applies only during Program/Erase Suspend/Resume commands 31
Data in hold time tHD 2 ns 31
Clock low to output valid, full VCC range tV 8 ns Full VCC range (2.7 - 3.6V) and CL = 30 pF 31
Clock low to output valid, regulated VCC, 30 pF tV 7.65 ns Regulated VCC range (3.0 - 3.6V) and CL = 30 pF 31
Clock low to output valid, regulated VCC, 15 pF tV 6.5 ns Regulated VCC range (3.0 - 3.6V) and CL = 15 pF 31
Output hold time tHO 2 ns 31
Output disable time tDIS 0 8 ns 31
WP# setup time tWPS 20 ns Only for WRR instruction when SRWD is set to 1 31
WP# hold time tWPH 100 ns Only for WRR instruction when SRWD is set to 1 31
HOLD# active setup time tHLCH 3 ns relative to SCK 31
HOLD# active hold time tCHHH 3 ns relative to SCK 31
HOLD# non active setup time tHHCH 3 ns relative to SCK 31
HOLD# non active hold time tCHHL 3 ns relative to SCK 31
HOLD# enable to output invalid tHZ 8 ns 31
HOLD# disable to output valid tLZ 8 ns 31

CAD (KiCad official)

  • Symbol: S25FL256SAGNFI001
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: s25fl256sagnfi001-etched.step / s25fl256sagnfi001-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); s25fl256sagnfi001.step / s25fl256sagnfi001.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Cypress Semicon datasheet (146 pp, sha256 4cdc2a61d3d31251, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF