main
Ray
Publish 0.1.0
1888d3e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201
{
"slug": "s25fl256sagnfi001",
"version": "0.1.0",
"type": "component",
"description": "Cypress Semicon NOR FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"s25fl256sagnfi001",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"s25fl256sagnfi001.kicad_sym",
"s25fl256sagnfi001.kicad_mod",
"s25fl256sagnfi001.glb",
"s25fl256sagnfi001.step",
"s25fl256sagnfi001.lbr",
"docs/hero.png",
"docs/s25fl256sagnfi001-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"s25fl256sagnfi001-hero.glb",
"s25fl256sagnfi001-hero.overlay.json",
"s25fl256sagnfi001-etched.glb"
],
"component": {
"mpn": "S25FL256SAGNFI001",
"manufacturer": "Cypress Semicon",
"package": "WSON-8-EP(6x8)",
"pin_count": 9,
"category": "Memory",
"subcategory": "NOR FLASH",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/efeace3fc36a9b1882832b4c3f96e3c0.pdf",
"parts": {
"symbol": "s25fl256sagnfi001.kicad_sym",
"footprint": "s25fl256sagnfi001.kicad_mod",
"model_3d": "s25fl256sagnfi001-hero.glb",
"model_3d_plain": "s25fl256sagnfi001-etched.glb",
"model_3d_step": "s25fl256sagnfi001-etched.step",
"model_3d_step_plain": "s25fl256sagnfi001.step",
"lbr": "s25fl256sagnfi001.lbr"
},
"distributor_links": {
"lcsc": "C466862",
"digikey": "448-S25FL256SAGNFI001-ND",
"mouser": "797-25FL256SAGNFI001"
},
"distributor_check": {
"checked_at": "2026-10-23T06:25:29Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "448-S25FL256SAGNFI001-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "797-25FL256SAGNFI001",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "CS#",
"type": "input",
"description": "Chip Select input that frames each SPI command; driving CS# high ends a command sequence such as RDID."
},
{
"number": "2",
"name": "SO/IO1",
"type": "bidirectional",
"description": "Serial Output in single-bit mode and IO1 in dual/quad modes; high impedance when not driving data."
},
{
"number": "3",
"name": "WP#/IO2",
"type": "bidirectional",
"description": "Write Protect input that, when LOW with SRWD set, locks the Status Register, BP and configuration register bits; serves as IO2 in quad mode."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Common ground reference for the device core, input receivers and output drivers."
},
{
"number": "5",
"name": "SI/IO0",
"type": "bidirectional",
"description": "Serial Input for commands, addresses and data in single-bit mode, and IO0 in dual/quad modes."
},
{
"number": "6",
"name": "SCK",
"type": "input",
"description": "Serial Clock input supporting SPI clock modes 0 and 3."
},
{
"number": "7",
"name": "HOLD#/IO3",
"type": "bidirectional",
"description": "Hold input in single/dual modes and IO3 in quad mode."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Core supply voltage for all internal logic, 2.7V to 3.6V; VIO and RESET# are tied to VCC internally in this package."
},
{
"number": "9",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The WSON top-view figure (Figure 41) was extracted as unordered text, so the pin-number-to-signal ma; The package has an exposed pad (D2/E2 dimensions on page 40), but the connection diagram text doesn'; The signal-description pages for CS#, SCK, SI, SO, WP# and HOLD# (Section 2.2–2.9) were not supplied"
],
"pages_sent": 27,
"cost_usd": 0.2579,
"at": "2026-10-23T06:23:01"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/efeace3fc36a9b1882832b4c3f96e3c0.pdf",
"pages": 146,
"sha256": "4cdc2a61d3d31251",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "s25fl256sagnfi001.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
8.02,
6.0,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "2adb2dd603a8b1ae28c162038f2c2ac72e60f11c2a255c4735ed8d492a1d0b41",
"checked": "2026-10-23",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "s25fl256sagnfi001-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
8.02,
6.0,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ad0d061528f293c0068d2846d4ba92b88c4ac43b66833be18835f050310d6b86",
"checked": "2026-10-23",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}