main
Ray rf430cl331hirgtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) efaef47
{
  "slug": "rf430cl331hirgtr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments RFID ICs, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rf and wireless",
    "rf430cl331hirgtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rf430cl331hirgtr.kicad_sym",
    "rf430cl331hirgtr.kicad_mod",
    "rf430cl331hirgtr.glb",
    "rf430cl331hirgtr.step",
    "rf430cl331hirgtr.lbr",
    "docs/hero.png",
    "docs/rf430cl331hirgtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "RF430CL331HIRGTR",
    "manufacturer": "Texas Instruments",
    "package": "QFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "RF And Wireless",
    "subcategory": "RFID ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/rf430cl331h",
    "parts": {
      "symbol": "rf430cl331hirgtr.kicad_sym",
      "footprint": "rf430cl331hirgtr.kicad_mod",
      "model_3d": "rf430cl331hirgtr-etched.glb",
      "model_3d_plain": "rf430cl331hirgtr.glb",
      "model_3d_step": "rf430cl331hirgtr-etched.step",
      "model_3d_step_plain": "rf430cl331hirgtr.step",
      "lbr": "rf430cl331hirgtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2654825",
      "digikey": "296-44160-2-ND",
      "mouser": "595-RF430CL331HIRGTR"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T05:40:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-44160-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-RF430CL331HIRGTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ANT1",
        "type": "input",
        "description": "RF antenna input 1 for AC-coupled connection to resonant LC antenna circuit."
      },
      {
        "number": "2",
        "name": "ANT2",
        "type": "input",
        "description": "RF antenna input 2 for AC-coupled connection to resonant LC antenna circuit."
      },
      {
        "number": "3",
        "name": "RST",
        "type": "input",
        "description": "Reset input active-low with integrated 20-35 kΩ pullup resistor; held low for minimum one clock cycle to initiate device reset."
      },
      {
        "number": "4",
        "name": "E0",
        "type": "input",
        "description": "I2C address select pin 0; sets bit 0 of the programmable 7-bit slave address."
      },
      {
        "number": "5",
        "name": "E1",
        "type": "input",
        "description": "I2C address select pin 1; sets bit 1 of the programmable 7-bit slave address."
      },
      {
        "number": "6",
        "name": "E2",
        "type": "input",
        "description": "I2C address select pin 2; sets bit 2 of the programmable 7-bit slave address."
      },
      {
        "number": "7",
        "name": "INTO",
        "type": "output",
        "description": "Interrupt output pin signaling enabled interrupt events; configurable active-high or active-low via General Control register."
      },
      {
        "number": "8",
        "name": "I2C_READY",
        "type": "output",
        "description": "Status output; high level indicates I2C communication can be started, low level prohibits new I2C communication."
      },
      {
        "number": "9",
        "name": "I2C_SIGNAL",
        "type": "output",
        "description": "Status output; low indicates wait-time-extension command is automatically being sent, I2C communication may continue."
      },
      {
        "number": "10",
        "name": "SCL",
        "type": "bidirectional",
        "description": "I2C clock line with open-drain output; external pullup resistor required, supports clock stretching up to 400 kHz when master supports it."
      },
      {
        "number": "11",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C data line with open-drain output; external pullup resistor required, maximum write frequency 120 kHz and read frequency 100 kHz when device is addressed."
      },
      {
        "number": "12",
        "name": "VCORE",
        "type": "power_out",
        "description": "Regulated 1.8 V core supply output for internal die circuitry; requires 0.1-0.47 µF decoupling capacitor."
      },
      {
        "number": "13",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground supply at 0 V reference potential."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No-connect pin, leave unconnected on printed circuit board."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "3.3 V primary supply input; operating range 3.0-3.6 V without RF field, 2.0-3.6 V with RF field present."
      },
      {
        "number": "16",
        "name": "NC",
        "type": "unconnected",
        "description": "No-connect pin, leave unconnected on printed circuit board."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: ANT1 and ANT2 are RF/analog antenna inputs; physical design requires LC resonant circuit with coil i; Exposed thermal pad is present in QFN-16-EP package but not listed in electrical pin table; pad must; Pin 15 (VCC) exhibits non-standard behavior where minimum supply voltage 2.0 V is permitted only whe",
          "exposed pad 17 added from the footprint"
        ],
        "pages_sent": 63,
        "cost_usd": 0.5114,
        "at": "2026-09-27T05:40:08"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/rf430cl331h",
        "pages": 63,
        "sha256": "78d8ec602eefb231",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "rf430cl331hirgtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rf430cl331hirgtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3aa6cfdbfb8bba7a1192a25efd227f97efca729ec7fb3f231887c92dffbcf5e6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}