main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rf430cl331hirgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers rf430cl331hirgtr: viewers · Ray
package.json rf430cl331hirgtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json rf430cl331hirgtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/rf430cl331hirgtr · Ray
rf430cl331hirgtr-etched.fit.json rf430cl331hirgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rf430cl331hirgtr-etched.glb rf430cl331hirgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rf430cl331hirgtr-etched.step rf430cl331hirgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rf430cl331hirgtr.glb Publish 0.1.0 · Ray
rf430cl331hirgtr.kicad_mod Publish 0.1.0 · Ray
rf430cl331hirgtr.kicad_sym Publish 0.1.0 · Ray
rf430cl331hirgtr.lbr Publish 0.1.0 · Ray
rf430cl331hirgtr.step Publish 0.1.0 · Ray

RF430CL331HIRGTR

Texas Instruments · RFID ICs · QFN-16-EP(3x3)

RF430CL331HIRGTR from Texas Instruments, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ANT1 input RF antenna input 1 for AC-coupled connection to resonant LC antenna circuit.
2 ANT2 input RF antenna input 2 for AC-coupled connection to resonant LC antenna circuit.
3 RST input Reset input active-low with integrated 20-35 kΩ pullup resistor; held low for minimum one clock cycle to initiate device reset.
4 E0 input I2C address select pin 0; sets bit 0 of the programmable 7-bit slave address.
5 E1 input I2C address select pin 1; sets bit 1 of the programmable 7-bit slave address.
6 E2 input I2C address select pin 2; sets bit 2 of the programmable 7-bit slave address.
7 INTO output Interrupt output pin signaling enabled interrupt events; configurable active-high or active-low via General Control register.
8 I2C_READY output Status output; high level indicates I2C communication can be started, low level prohibits new I2C communication.
9 I2C_SIGNAL output Status output; low indicates wait-time-extension command is automatically being sent, I2C communication may continue.
10 SCL bidirectional I2C clock line with open-drain output; external pullup resistor required, supports clock stretching up to 400 kHz when master supports it.
11 SDA bidirectional I2C data line with open-drain output; external pullup resistor required, maximum write frequency 120 kHz and read frequency 100 kHz when device is addressed.
12 VCORE power_out Regulated 1.8 V core supply output for internal die circuitry; requires 0.1-0.47 µF decoupling capacitor.
13 VSS power_in Ground supply at 0 V reference potential.
14 NC unconnected No-connect pin, leave unconnected on printed circuit board.
15 VCC power_in 3.3 V primary supply input; operating range 3.0-3.6 V without RF field, 2.0-3.6 V with RF field present.
16 NC unconnected No-connect pin, leave unconnected on printed circuit board.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package QFN-16-EP(3x3)
Category RF And Wireless
Pins 17

CAD (KiCad official)

  • Symbol: RF430CL331HIRGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: rf430cl331hirgtr-etched.step / rf430cl331hirgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rf430cl331hirgtr.step / rf430cl331hirgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (63 pp, sha256 78d8ec602eefb231, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF