RC0402FR-074K7L - YAGEO
Public Made by Adomby adom
Thick film chip resistor 4.7 kOhm +/-1 %, 1/16 W, 0402 (1005 metric)
| Name | Last updated |
|---|---|
| altium | 1d ago |
| docs | 1d ago |
| land-pattern | 1d ago |
| lod | 1d ago |
| provenance | 1d ago |
| LICENSE | 1d ago |
| models.json | 1d ago |
| package-reference.glb | 1d ago |
| package.json | 1d ago |
| page.json | 1d ago |
| provenance.json | 1d ago |
| R_0402_1005Metric_RC0402FR-074K7L.kicad_mod | 1d ago |
| rc0402fr-074k7l-hero.glb | 1d ago |
| rc0402fr-074k7l-hero.overlay.json | 1d ago |
| RC0402FR-074K7L.kicad_sym | 1d ago |
| RC0402FR-074K7L.lbr | 1d ago |
| RC0402FR-074K7L.step | 1d ago |
| README.md | 1d ago |
| verification.json | 1d ago |
RC0402FR-074K7L
YAGEO RC0402FR-074K7L: Thick film chip resistor 4.7 kOhm +/-1 %, 1/16 W, 0402 (1005 metric).
| Field | Value |
|---|---|
| Manufacturer | YAGEO |
| Manufacturer part number | RC0402FR-074K7L |
| Type | Thick film chip resistor |
| Value | 4.7 kOhm |
| Tolerance | +/-1 % (F) |
| Voltage | 50 V max working, 100 V max overload |
| Power rating | 1/16 W (0.0625 W) at 70 C |
| Operating temperature | -55 to 155 C |
| Package | 0402 (1005 metric) |
| Datasheet | YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025 |
Key specifications
| Parameter | Value | Datasheet |
|---|---|---|
| Resistance | 4.7 kOhm (code 4K7) | p.2 ordering information |
| Tolerance | +/-1 % (code F), E24/E96, range 1 Ohm to 10 MOhm | p.2, p.5 Table 2 |
| Rated power | 1/16 W (0.0625 W) at 70 C, standard power (reel code 07) | p.2 (5), p.5 Table 2, p.7 derating |
| Max working voltage | 50 V | p.5 Table 2 |
| Max overload voltage | 100 V | p.5 Table 2 |
| Dielectric withstanding voltage | 100 V | p.5 Table 2 |
| Temperature coefficient | +/-100 ppm/C for 10 Ohm < R <= 10 MOhm | p.5 Table 2 |
| Operating temperature | -55 to 155 C | p.5 Table 2 |
| Technology | thick film on ceramic substrate, matte tin on nickel terminations | p.4 Construction |
| Size | L 1.00 +/-0.05, W 0.50 +/-0.05, H 0.35 +/-0.05, I1 0.20 +/-0.10, I2 0.25 +/-0.10 (mm) | p.4 Table 1 |
| Packaging (R, 07) | 7 inch (178 mm) paper taping reel, 10000 pcs | p.2, p.7 Table 4 |
All page numbers refer to the PDF in docs/ unless stated otherwise.
Notes
- Mouser lists the part as 'RoHS Compliant By Exemption'; the datasheet (p.2) says Pb-glass in electrodes, resistor element and glass is exempted.
Ordering
| Distributor | Part number | Stock seen 2026-10-21 |
|---|---|---|
| Mouser | 603-RC0402FR-074K7L | 5,501,943 |
| DigiKey | 311-4.7KLRTR-ND | 0 |
| LCSC / JLCPCB | C105871 | 9,075,667 |
Stock figures are a snapshot from the Adom parts search on 2026-10-21; check the distributor before ordering.
Manufacturer and resources
| Resource | Link |
|---|---|
| Product page | https://yageogroup.com/products/productDetail/RC0402FR-074K7L |
| Datasheet | YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025, PDF (source) |
| Supporting document | YAGEO Chip Resistors Mounting, product specification V.10, Feb. 13, 2018, PDF (source) |
Pins
| Pin | Function |
|---|---|
| 1 | terminal (non-polar) |
| 2 | terminal (non-polar) |
A resistor of this kind has no polarity and no pin 1 orientation: either terminal may face either way.
Land pattern: KiCad footprint vs YAGEO
 Land pattern |
The footprint is KiCad's standard `R_0402_1005Metric`, and this guide lays its pads over the land pattern recommended by YAGEO, at true scale. It matches the maker closely. Use it to decide whether to keep the KiCad pads or shrink them to the maker's numbers before layout. The comparison, with the numbers |
3D model
No manufacturer STEP for this exact part number could be downloaded directly: YAGEO's product pages build their
CAD links in the browser and expose no direct STEP link, so the page uses KiCad's library model for the package, R_0402_1005Metric.step, with its bytes
unchanged, renamed RC0402FR-074K7L.step. It was checked against the datasheet table before use (next section). The GLB for the
page viewer was made from it with step2glb convert. YAGEO states 'No Marking' for RC0402 (Fig. 1) (searched: RC_L product specification V.14, p.3 'Marking'), so the model shows a plain body.
The page viewer shows rc0402fr-074k7l-hero.glb: the clean model plus nonphysical reference artwork drawn under it to the adom-hero 1.4
standard (adom/component-hero): the footprint's pads as teal dashed outlines at 50 % opacity, its silkscreen at
70 % transparency and the pad numbers 1 and 2 (the terminals have no names). The part is non-polar, so no pin-1 dot is
added. The artwork never goes into the STEP, package-reference.glb or the board LODs.
Model checked against the datasheet
The model was rendered in orthographic top, bottom, side and end views at true scale and laid over a drawing made at the same scale from the printed table (nominal outline, tolerance limits, allowed terminal band). Every dimension is inside the printed range: L 1.000 mm (datasheet 0.95 to 1.05), W 0.500 mm (datasheet 0.45 to 0.55), T/H 0.350 mm (datasheet 0.30 to 0.40), I1 (terminal on top) 0.165 mm (datasheet 0.10 to 0.30), I2 (terminal on bottom) 0.165 mm (datasheet 0.15 to 0.35). The model is Z-up, seated on z = 0, centred on the footprint origin, long axis on X.
Source: YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025, p.4 Table 1, RC0402: L 1.00 +/-0.05, W 0.50 +/-0.05, H 0.35 +/-0.05, I1 0.20 +/-0.10, I2 0.25 +/-0.10 (mm).
Board levels of detail
Clean board-use GLBs (no footprint pads, outlines, labels or silkscreen; no marking) in four levels, all in the same Z-up, metre, footprint-origin pose as the STEP. Previews are rendered from each GLB.
CAD files
| File | What it is |
|---|---|
RC0402FR-074K7L.kicad_sym |
KiCad symbol (standard resistor graphic) with MPN, Manufacturer, Mouser, DigiKey and LCSC fields |
R_0402_1005Metric_RC0402FR-074K7L.kicad_mod |
KiCad footprint (KiCad library R_0402_1005Metric, renamed; model path ${KIPRJMOD}/RC0402FR-074K7L.step) |
RC0402FR-074K7L.lbr |
Fusion / EAGLE library made from the KiCad symbol and footprint with adom-lbr generate (carries MPN, MANUFACTURER, MOUSER_PN, DIGIKEY_PN, LCSC_PN) |
RC0402FR-074K7L.step |
3D package model, STEP |
package-reference.glb |
3D package model, GLB |
rc0402fr-074k7l-hero.glb |
page-viewer hero: the clean model plus footprint artwork (adom-hero 1.4); rc0402fr-074k7l-hero.overlay.json lists every pad and label |
altium/RC0402FR-074K7L.SchLib |
Altium schematic library, made with adom-lbr import-kicad and export-altium |
altium/RC0402FR-074K7L.PcbLib |
Altium PCB library, made with adom-lbr import-kicad and export-altium |
altium/RC0402FR-074K7L.adom-lbr.json |
adom-lbr hub JSON (symbol, footprint, pin-to-pad map) behind the Altium files |
lod/ |
board-use GLBs in four levels of detail, with previews and manifest |
Sources and license
- YAGEO: YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025 (https://yageogroup.com/content/datasheet/asset/file/PYU-RC_GROUP_51_ROHS_L)
- YAGEO Chip Resistors Mounting, product specification V.10, Feb. 13, 2018 (https://yageogroup.com/content/Resource%20Library/Product%20Guide-Catalog/yageo_PYu-R_Mount_10_19050818_343.pdf)
- KiCad libraries: Resistor_SMD.pretty/R_0402_1005Metric.kicad_mod, Resistor_SMD.3dshapes/R_0402_1005Metric.step
- Distributor numbers: Mouser, DigiKey and JLCPCB/LCSC through the Adom parts search, 2026-10-21
Original Adom content is CC-BY-4.0. The KiCad footprint and 3D files keep their upstream license (CC-BY-SA 4.0 with the
KiCad library exception) and the PDFs remain the publishers' documents; see LICENSE.
provenance.json records every source and file hash; the scripts that built the checks are in provenance/tools/.
This is a catalog record for the part, not a manufacturing approval: check the maker's current datasheet for your design.