component

RC0402FR-074K7L - YAGEO

Public Made by Adom

by adom

Thick film chip resistor 4.7 kOhm +/-1 %, 1/16 W, 0402 (1005 metric)

hardwarecomponentpassiveresistor0402yageo
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

RC0402FR-074K7L

YAGEO RC0402FR-074K7L: Thick film chip resistor 4.7 kOhm +/-1 %, 1/16 W, 0402 (1005 metric).

Field Value
Manufacturer YAGEO
Manufacturer part number RC0402FR-074K7L
Type Thick film chip resistor
Value 4.7 kOhm
Tolerance +/-1 % (F)
Voltage 50 V max working, 100 V max overload
Power rating 1/16 W (0.0625 W) at 70 C
Operating temperature -55 to 155 C
Package 0402 (1005 metric)
Datasheet YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025

Key specifications

Parameter Value Datasheet
Resistance 4.7 kOhm (code 4K7) p.2 ordering information
Tolerance +/-1 % (code F), E24/E96, range 1 Ohm to 10 MOhm p.2, p.5 Table 2
Rated power 1/16 W (0.0625 W) at 70 C, standard power (reel code 07) p.2 (5), p.5 Table 2, p.7 derating
Max working voltage 50 V p.5 Table 2
Max overload voltage 100 V p.5 Table 2
Dielectric withstanding voltage 100 V p.5 Table 2
Temperature coefficient +/-100 ppm/C for 10 Ohm < R <= 10 MOhm p.5 Table 2
Operating temperature -55 to 155 C p.5 Table 2
Technology thick film on ceramic substrate, matte tin on nickel terminations p.4 Construction
Size L 1.00 +/-0.05, W 0.50 +/-0.05, H 0.35 +/-0.05, I1 0.20 +/-0.10, I2 0.25 +/-0.10 (mm) p.4 Table 1
Packaging (R, 07) 7 inch (178 mm) paper taping reel, 10000 pcs p.2, p.7 Table 4

All page numbers refer to the PDF in docs/ unless stated otherwise.

Notes

  • Mouser lists the part as 'RoHS Compliant By Exemption'; the datasheet (p.2) says Pb-glass in electrodes, resistor element and glass is exempted.

Ordering

Distributor Part number Stock seen 2026-10-21
Mouser 603-RC0402FR-074K7L 5,501,943
DigiKey 311-4.7KLRTR-ND 0
LCSC / JLCPCB C105871 9,075,667

Stock figures are a snapshot from the Adom parts search on 2026-10-21; check the distributor before ordering.

Manufacturer and resources

Resource Link
Product page https://yageogroup.com/products/productDetail/RC0402FR-074K7L
Datasheet YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025, PDF (source)
Supporting document YAGEO Chip Resistors Mounting, product specification V.10, Feb. 13, 2018, PDF (source)

Pins

Pin Function
1 terminal (non-polar)
2 terminal (non-polar)

A resistor of this kind has no polarity and no pin 1 orientation: either terminal may face either way.

Land pattern: KiCad footprint vs YAGEO

Land pattern
    Land pattern    		 The footprint is KiCad's standard `R_0402_1005Metric`, and this guide lays its pads over the land pattern recommended by YAGEO, at true scale. It matches the maker closely. Use it to decide whether to keep the KiCad pads or shrink them to the maker's numbers before layout.

The comparison, with the numbers

3D model

No manufacturer STEP for this exact part number could be downloaded directly: YAGEO's product pages build their CAD links in the browser and expose no direct STEP link, so the page uses KiCad's library model for the package, R_0402_1005Metric.step, with its bytes unchanged, renamed RC0402FR-074K7L.step. It was checked against the datasheet table before use (next section). The GLB for the page viewer was made from it with step2glb convert. YAGEO states 'No Marking' for RC0402 (Fig. 1) (searched: RC_L product specification V.14, p.3 'Marking'), so the model shows a plain body.

The page viewer shows rc0402fr-074k7l-hero.glb: the clean model plus nonphysical reference artwork drawn under it to the adom-hero 1.4 standard (adom/component-hero): the footprint's pads as teal dashed outlines at 50 % opacity, its silkscreen at 70 % transparency and the pad numbers 1 and 2 (the terminals have no names). The part is non-polar, so no pin-1 dot is added. The artwork never goes into the STEP, package-reference.glb or the board LODs.

Hero preview, top and oblique

Model checked against the datasheet

The model was rendered in orthographic top, bottom, side and end views at true scale and laid over a drawing made at the same scale from the printed table (nominal outline, tolerance limits, allowed terminal band). Every dimension is inside the printed range: L 1.000 mm (datasheet 0.95 to 1.05), W 0.500 mm (datasheet 0.45 to 0.55), T/H 0.350 mm (datasheet 0.30 to 0.40), I1 (terminal on top) 0.165 mm (datasheet 0.10 to 0.30), I2 (terminal on bottom) 0.165 mm (datasheet 0.15 to 0.35). The model is Z-up, seated on z = 0, centred on the footprint origin, long axis on X.

Model over the datasheet dimensions

Source: YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025, p.4 Table 1, RC0402: L 1.00 +/-0.05, W 0.50 +/-0.05, H 0.35 +/-0.05, I1 0.20 +/-0.10, I2 0.25 +/-0.10 (mm).

Board levels of detail

Clean board-use GLBs (no footprint pads, outlines, labels or silkscreen; no marking) in four levels, all in the same Z-up, metre, footprint-origin pose as the STEP. Previews are rendered from each GLB.

CAD files

File What it is
RC0402FR-074K7L.kicad_sym KiCad symbol (standard resistor graphic) with MPN, Manufacturer, Mouser, DigiKey and LCSC fields
R_0402_1005Metric_RC0402FR-074K7L.kicad_mod KiCad footprint (KiCad library R_0402_1005Metric, renamed; model path ${KIPRJMOD}/RC0402FR-074K7L.step)
RC0402FR-074K7L.lbr Fusion / EAGLE library made from the KiCad symbol and footprint with adom-lbr generate (carries MPN, MANUFACTURER, MOUSER_PN, DIGIKEY_PN, LCSC_PN)
RC0402FR-074K7L.step 3D package model, STEP
package-reference.glb 3D package model, GLB
rc0402fr-074k7l-hero.glb page-viewer hero: the clean model plus footprint artwork (adom-hero 1.4); rc0402fr-074k7l-hero.overlay.json lists every pad and label
altium/RC0402FR-074K7L.SchLib Altium schematic library, made with adom-lbr import-kicad and export-altium
altium/RC0402FR-074K7L.PcbLib Altium PCB library, made with adom-lbr import-kicad and export-altium
altium/RC0402FR-074K7L.adom-lbr.json adom-lbr hub JSON (symbol, footprint, pin-to-pad map) behind the Altium files
lod/ board-use GLBs in four levels of detail, with previews and manifest

Sources and license

Original Adom content is CC-BY-4.0. The KiCad footprint and 3D files keep their upstream license (CC-BY-SA 4.0 with the KiCad library exception) and the PDFs remain the publishers' documents; see LICENSE. provenance.json records every source and file hash; the scripts that built the checks are in provenance/tools/.

This is a catalog record for the part, not a manufacturing approval: check the maker's current datasheet for your design.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF