main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers raa2100404glg-hd0: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
raa2100404glg-hd0-etched.glb raa2100404glg-hd0: factory component page (tier=mfr) · Ray
raa2100404glg-hd0-etched.step raa2100404glg-hd0: factory component page (tier=mfr) · Ray
raa2100404glg-hd0-hero.glb raa2100404glg-hd0: hero GLB from the etched model (keeps the MPN mark) · Ray
raa2100404glg-hd0-hero.overlay.json raa2100404glg-hd0: hero GLB from the etched model (keeps the MPN mark) · Ray
raa2100404glg-hd0.glb Publish 0.1.0 · Ray
raa2100404glg-hd0.kicad_mod Publish 0.1.0 · Ray
raa2100404glg-hd0.kicad_sym Publish 0.1.0 · Ray
raa2100404glg-hd0.lbr Publish 0.1.0 · Ray
raa2100404glg-hd0.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 11 pins · Ray

RAA2100404GLG#HD0

RENESAS · Power Modules · DFN-10(3x3)

RAA2100404GLG#HD0 from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground, to be connected close to the negative terminals of the external input and output capacitors.
2 FB input Voltage setting pin set by an external resistor divider, with the output adjustable between 0.6V and 5V.
3 COMP passive Compensation pin, the transconductance error amplifier output, connected to VIN for internal compensation or to SGND with an external network.
4 SGND power_in Signal ground that must be connected to EPAD for proper electrical performance.
5 VOUT power_out Power output of the module, with output capacitors placed as close as possible to this pin.
6 FS input Frequency selection pin where a resistor to SGND programs the switching frequency from 500kHz to 4MHz, with 2MHz default when connected to VIN.
7 EN input Module enable pin that is driven high to enable and driven low to shut down and discharge the output, and must not be left floating.
8 SYNC input Synchronization pin that is tied high or to VIN for PWM mode or driven with a 500kHz to 4MHz square wave, and must not be left floating.
9 PG output Open-drain power-good output that requires a 10kΩ to 100kΩ pull-up to VIN and whose rising edge is delayed by 1ms after the output is in regulation.
10 VIN power_in Power input of the module, to be tied to the 2.7V to 5.5V input rail with at least 2x22µF X7R input capacitance placed close to the module.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer RENESAS
Package DFN-10(3x3)
Category Power Management
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN to PGND -0.3 5.8 V DC; or +7V for 20ms 7
EN, FS, PG, FB, SYNC, COMP to SGND -0.3 V max printed as VIN + 0.3 V 7
VOUT to PGND -0.3 V max printed as VIN + 0.3 V 7
Maximum Storage Temperature Range TSTORE -65 150 °C 7
Human Body Model ESD 2 kV Human Body Model, tested per JS-001-2014 7
Charged Device Model ESD 750 V Charged Device Model, tested per JS-002-2014 7
Latch-Up 100 mA tested per JESD78E; Class II, Level A, +125°C 7
VIN to GND VIN 2.7 5.5 V 7
Junction Temperature Range TJ -40 125 °C 7
Output Current IOUT 0 4 A 7
Output Voltage VOUT 0.6 5 V 7
VIN Undervoltage Lockout Threshold, rising VUVLO 2.5 2.7 V Rising, no load 8
VIN Undervoltage Lockout Threshold, falling VUVLO 2.2 2.45 V Falling, no load 8
Output Voltage Accuracy VOUT_ACCY -1.5 1.5 % Total variation with line, load, and temperature (-40°C ≤ TJ ≤ +125°C) 8
Line Regulation ΔVOUT/VOUT_SET -1 1 % VIN from 2.7V to 5.5V, IOUT = 0A 8
Load Regulation ΔVOUT/VOUT_SET -1 1 % From 0A to 4A, VIN = 5V 8
Positive Peak Current Limit IPLIMIT 5.2 6.6 9 A 8
Negative Current Limit INLIMIT -6 -3 -0.6 A 8
EN Logic Input Low 0.4 V 8
EN Logic Input High 0.9 V 8
EN Logic Input Leakage Current 0.1 1 uA Pulled up to 3.6V 8
Output Low Voltage 0.3 V IPG = 1mA 9
PG Delay Time (Rising Edge) tPGR 0.5 1 2 ms Time from VOUT reached regulation 9
PG Leakage Current IPGLKG 10 100 nA PG = 3.6V 9
UVP PG Rising Threshold VPGR_UVP 80 86 90 % 9
Internal Reference Voltage VREF 0.593 0.6 0.606 V 9
Current Sense Gain 0.145 0.2 0.25 Ω 9
Minimum On-Time tON_MIN 100 ns SYNC=high 9
Switching Frequency fSW=2MHz fSW 1.7 2 2.35 MHz fSW=2MHz 9
Switching Frequency RFS=402kΩ fSW 0.475 0.5 0.525 MHz RFS=402kΩ 9
Switching Frequency RFS=42.2kΩ fSW 3.94 4 4.125 MHz RFS=42.2kΩ 9
SYNC Synchronization Range fSYNC 0.5 4 MHz 9
SYNC Logic Low-to-High Transition Range 0.67 0.76 0.84 V 9
SYNC Logic Input Leakage Current 4 5 uA VIN = 3.6V 9
Quiescent Supply Current, VIN=3.6V IVIN 19 25 mA SYNC = VIN=3.6V, fSW = 2MHz, EN = high, IOUT = 0A 8
Quiescent Supply Current, VIN=5V IVIN 23 30 mA SYNC = VIN=5V, fSW = 2MHz, EN = high, IOUT = 0A 8
Shutdown Supply Current ISD 4.5 10 uA SYNC=VIN=5.5V, EN=low 8
Current Limit Blanking Time tOCON 17 clock pulses 8
Hiccup Time thiccup 8 ms 8
Default Internal Output Ramping Time tSS 1 ms SS=SGND 8
PG Delay Time (Falling Edge) tPGF 6.5 us 9
OVP PG Rising Threshold VPGR_OVP 0.8 V 9
UVP PG Hysteresis 5.4 % 9
FB Bias Current IFBLKG 0.1 uA FB = 0.75V 9
Error Amplifier Transconductance, internal compensation 126 uA/V Internal Compensation 9
Error Amplifier Transconductance, external compensation 132 uA/V External Compensation 9
Maximum Duty Cycle dMAX 100 % 9
SYNC Hysteresis 0.17 V 9
Over-Temperature Shutdown TOT-TH 150 °C 9
Over-Temperature Hysteresis TOT-HYS 25 °C 9
Thermal Resistance, junction to air θJA 33.84 °C/W Junction to air; 4-layer test board 3x4.5 inch 7
Thermal Resistance, junction to case θJC 16.4 °C/W Junction to case; center of exposed metal pad 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper The RAA210040 is integrated into a 10 Lead Dual Flat Embedded Laminate Package with exposed copper 21

CAD (KiCad official)

  • Symbol: RAA2100404GLG#HD0
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
  • 3D model files: raa2100404glg-hd0-etched.step / raa2100404glg-hd0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); raa2100404glg-hd0.step / raa2100404glg-hd0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet, copy hosted by LCSC (25 pp, sha256 ca47f41a531ba331, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF