main
Ray
Publish 0.1.0
90d8f68
RAA2100404GLG#HD0
RENESAS · Power Modules · DFN-10(3x3)
RAA2100404GLG#HD0 from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground, to be connected close to the negative terminals of the external input and output capacitors. |
| 2 | FB | input | Voltage setting pin set by an external resistor divider, with the output adjustable between 0.6V and 5V. |
| 3 | COMP | passive | Compensation pin, the transconductance error amplifier output, connected to VIN for internal compensation or to SGND with an external network. |
| 4 | SGND | power_in | Signal ground that must be connected to EPAD for proper electrical performance. |
| 5 | VOUT | power_out | Power output of the module, with output capacitors placed as close as possible to this pin. |
| 6 | FS | input | Frequency selection pin where a resistor to SGND programs the switching frequency from 500kHz to 4MHz, with 2MHz default when connected to VIN. |
| 7 | EN | input | Module enable pin that is driven high to enable and driven low to shut down and discharge the output, and must not be left floating. |
| 8 | SYNC | input | Synchronization pin that is tied high or to VIN for PWM mode or driven with a 500kHz to 4MHz square wave, and must not be left floating. |
| 9 | PG | output | Open-drain power-good output that requires a 10kΩ to 100kΩ pull-up to VIN and whose rising edge is delayed by 1ms after the output is in regulation. |
| 10 | VIN | power_in | Power input of the module, to be tied to the 2.7V to 5.5V input rail with at least 2x22µF X7R input capacitance placed close to the module. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | DFN-10(3x3) |
| Category | Power Management |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to PGND | -0.3 | 5.8 | V | DC; or +7V for 20ms | 7 | ||
| EN, FS, PG, FB, SYNC, COMP to SGND | -0.3 | V | max printed as VIN + 0.3 V | 7 | |||
| VOUT to PGND | -0.3 | V | max printed as VIN + 0.3 V | 7 | |||
| Maximum Storage Temperature Range | TSTORE | -65 | 150 | °C | 7 | ||
| Human Body Model ESD | 2 | kV | Human Body Model, tested per JS-001-2014 | 7 | |||
| Charged Device Model ESD | 750 | V | Charged Device Model, tested per JS-002-2014 | 7 | |||
| Latch-Up | 100 | mA | tested per JESD78E; Class II, Level A, +125°C | 7 | |||
| VIN to GND | VIN | 2.7 | 5.5 | V | 7 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 7 | ||
| Output Current | IOUT | 0 | 4 | A | 7 | ||
| Output Voltage | VOUT | 0.6 | 5 | V | 7 | ||
| VIN Undervoltage Lockout Threshold, rising | VUVLO | 2.5 | 2.7 | V | Rising, no load | 8 | |
| VIN Undervoltage Lockout Threshold, falling | VUVLO | 2.2 | 2.45 | V | Falling, no load | 8 | |
| Output Voltage Accuracy | VOUT_ACCY | -1.5 | 1.5 | % | Total variation with line, load, and temperature (-40°C ≤ TJ ≤ +125°C) | 8 | |
| Line Regulation | ΔVOUT/VOUT_SET | -1 | 1 | % | VIN from 2.7V to 5.5V, IOUT = 0A | 8 | |
| Load Regulation | ΔVOUT/VOUT_SET | -1 | 1 | % | From 0A to 4A, VIN = 5V | 8 | |
| Positive Peak Current Limit | IPLIMIT | 5.2 | 6.6 | 9 | A | 8 | |
| Negative Current Limit | INLIMIT | -6 | -3 | -0.6 | A | 8 | |
| EN Logic Input Low | 0.4 | V | 8 | ||||
| EN Logic Input High | 0.9 | V | 8 | ||||
| EN Logic Input Leakage Current | 0.1 | 1 | uA | Pulled up to 3.6V | 8 | ||
| Output Low Voltage | 0.3 | V | IPG = 1mA | 9 | |||
| PG Delay Time (Rising Edge) | tPGR | 0.5 | 1 | 2 | ms | Time from VOUT reached regulation | 9 |
| PG Leakage Current | IPGLKG | 10 | 100 | nA | PG = 3.6V | 9 | |
| UVP PG Rising Threshold | VPGR_UVP | 80 | 86 | 90 | % | 9 | |
| Internal Reference Voltage | VREF | 0.593 | 0.6 | 0.606 | V | 9 | |
| Current Sense Gain | 0.145 | 0.2 | 0.25 | Ω | 9 | ||
| Minimum On-Time | tON_MIN | 100 | ns | SYNC=high | 9 | ||
| Switching Frequency fSW=2MHz | fSW | 1.7 | 2 | 2.35 | MHz | fSW=2MHz | 9 |
| Switching Frequency RFS=402kΩ | fSW | 0.475 | 0.5 | 0.525 | MHz | RFS=402kΩ | 9 |
| Switching Frequency RFS=42.2kΩ | fSW | 3.94 | 4 | 4.125 | MHz | RFS=42.2kΩ | 9 |
| SYNC Synchronization Range | fSYNC | 0.5 | 4 | MHz | 9 | ||
| SYNC Logic Low-to-High Transition Range | 0.67 | 0.76 | 0.84 | V | 9 | ||
| SYNC Logic Input Leakage Current | 4 | 5 | uA | VIN = 3.6V | 9 | ||
| Quiescent Supply Current, VIN=3.6V | IVIN | 19 | 25 | mA | SYNC = VIN=3.6V, fSW = 2MHz, EN = high, IOUT = 0A | 8 | |
| Quiescent Supply Current, VIN=5V | IVIN | 23 | 30 | mA | SYNC = VIN=5V, fSW = 2MHz, EN = high, IOUT = 0A | 8 | |
| Shutdown Supply Current | ISD | 4.5 | 10 | uA | SYNC=VIN=5.5V, EN=low | 8 | |
| Current Limit Blanking Time | tOCON | 17 | clock pulses | 8 | |||
| Hiccup Time | thiccup | 8 | ms | 8 | |||
| Default Internal Output Ramping Time | tSS | 1 | ms | SS=SGND | 8 | ||
| PG Delay Time (Falling Edge) | tPGF | 6.5 | us | 9 | |||
| OVP PG Rising Threshold | VPGR_OVP | 0.8 | V | 9 | |||
| UVP PG Hysteresis | 5.4 | % | 9 | ||||
| FB Bias Current | IFBLKG | 0.1 | uA | FB = 0.75V | 9 | ||
| Error Amplifier Transconductance, internal compensation | 126 | uA/V | Internal Compensation | 9 | |||
| Error Amplifier Transconductance, external compensation | 132 | uA/V | External Compensation | 9 | |||
| Maximum Duty Cycle | dMAX | 100 | % | 9 | |||
| SYNC Hysteresis | 0.17 | V | 9 | ||||
| Over-Temperature Shutdown | TOT-TH | 150 | °C | 9 | |||
| Over-Temperature Hysteresis | TOT-HYS | 25 | °C | 9 | |||
| Thermal Resistance, junction to air | θJA | 33.84 | °C/W | Junction to air; 4-layer test board 3x4.5 inch | 7 | ||
| Thermal Resistance, junction to case | θJC | 16.4 | °C/W | Junction to case; center of exposed metal pad | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The RAA210040 is integrated into a 10 Lead Dual Flat Embedded Laminate Package with exposed copper | 21 |
CAD (KiCad official)
- Symbol:
RAA2100404GLG#HD0 - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files:
raa2100404glg-hd0-etched.step/raa2100404glg-hd0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);raa2100404glg-hd0.step/raa2100404glg-hd0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet, copy hosted by LCSC (25 pp, sha256
ca47f41a531ba331, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RAA2100404GLG#HD0
**RENESAS** · Power Modules · DFN-10(3x3)
RAA2100404GLG#HD0 from RENESAS, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground, to be connected close to the negative terminals of the external input and output capacitors. |
| 2 | FB | input | Voltage setting pin set by an external resistor divider, with the output adjustable between 0.6V and 5V. |
| 3 | COMP | passive | Compensation pin, the transconductance error amplifier output, connected to VIN for internal compensation or to SGND with an external network. |
| 4 | SGND | power_in | Signal ground that must be connected to EPAD for proper electrical performance. |
| 5 | VOUT | power_out | Power output of the module, with output capacitors placed as close as possible to this pin. |
| 6 | FS | input | Frequency selection pin where a resistor to SGND programs the switching frequency from 500kHz to 4MHz, with 2MHz default when connected to VIN. |
| 7 | EN | input | Module enable pin that is driven high to enable and driven low to shut down and discharge the output, and must not be left floating. |
| 8 | SYNC | input | Synchronization pin that is tied high or to VIN for PWM mode or driven with a 500kHz to 4MHz square wave, and must not be left floating. |
| 9 | PG | output | Open-drain power-good output that requires a 10kΩ to 100kΩ pull-up to VIN and whose rising edge is delayed by 1ms after the output is in regulation. |
| 10 | VIN | power_in | Power input of the module, to be tied to the 2.7V to 5.5V input rail with at least 2x22µF X7R input capacitance placed close to the module. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | DFN-10(3x3) |
| Category | Power Management |
| Pins | 11 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to PGND | | -0.3 | | 5.8 | V | DC; or +7V for 20ms | 7 |
| EN, FS, PG, FB, SYNC, COMP to SGND | | -0.3 | | | V | max printed as VIN + 0.3 V | 7 |
| VOUT to PGND | | -0.3 | | | V | max printed as VIN + 0.3 V | 7 |
| Maximum Storage Temperature Range | TSTORE | -65 | | 150 | °C | | 7 |
| Human Body Model ESD | | | | 2 | kV | Human Body Model, tested per JS-001-2014 | 7 |
| Charged Device Model ESD | | | | 750 | V | Charged Device Model, tested per JS-002-2014 | 7 |
| Latch-Up | | | | 100 | mA | tested per JESD78E; Class II, Level A, +125°C | 7 |
| VIN to GND | VIN | 2.7 | | 5.5 | V | | 7 |
| Junction Temperature Range | TJ | -40 | | 125 | °C | | 7 |
| Output Current | IOUT | 0 | | 4 | A | | 7 |
| Output Voltage | VOUT | 0.6 | | 5 | V | | 7 |
| VIN Undervoltage Lockout Threshold, rising | VUVLO | 2.5 | | 2.7 | V | Rising, no load | 8 |
| VIN Undervoltage Lockout Threshold, falling | VUVLO | 2.2 | | 2.45 | V | Falling, no load | 8 |
| Output Voltage Accuracy | VOUT_ACCY | -1.5 | | 1.5 | % | Total variation with line, load, and temperature (-40°C ≤ TJ ≤ +125°C) | 8 |
| Line Regulation | ΔVOUT/VOUT_SET | -1 | | 1 | % | VIN from 2.7V to 5.5V, IOUT = 0A | 8 |
| Load Regulation | ΔVOUT/VOUT_SET | -1 | | 1 | % | From 0A to 4A, VIN = 5V | 8 |
| Positive Peak Current Limit | IPLIMIT | 5.2 | 6.6 | 9 | A | | 8 |
| Negative Current Limit | INLIMIT | -6 | -3 | -0.6 | A | | 8 |
| EN Logic Input Low | | | | 0.4 | V | | 8 |
| EN Logic Input High | | 0.9 | | | V | | 8 |
| EN Logic Input Leakage Current | | | 0.1 | 1 | uA | Pulled up to 3.6V | 8 |
| Output Low Voltage | | | | 0.3 | V | IPG = 1mA | 9 |
| PG Delay Time (Rising Edge) | tPGR | 0.5 | 1 | 2 | ms | Time from VOUT reached regulation | 9 |
| PG Leakage Current | IPGLKG | | 10 | 100 | nA | PG = 3.6V | 9 |
| UVP PG Rising Threshold | VPGR_UVP | 80 | 86 | 90 | % | | 9 |
| Internal Reference Voltage | VREF | 0.593 | 0.6 | 0.606 | V | | 9 |
| Current Sense Gain | | 0.145 | 0.2 | 0.25 | Ω | | 9 |
| Minimum On-Time | tON_MIN | | 100 | | ns | SYNC=high | 9 |
| Switching Frequency fSW=2MHz | fSW | 1.7 | 2 | 2.35 | MHz | fSW=2MHz | 9 |
| Switching Frequency RFS=402kΩ | fSW | 0.475 | 0.5 | 0.525 | MHz | RFS=402kΩ | 9 |
| Switching Frequency RFS=42.2kΩ | fSW | 3.94 | 4 | 4.125 | MHz | RFS=42.2kΩ | 9 |
| SYNC Synchronization Range | fSYNC | 0.5 | | 4 | MHz | | 9 |
| SYNC Logic Low-to-High Transition Range | | 0.67 | 0.76 | 0.84 | V | | 9 |
| SYNC Logic Input Leakage Current | | | 4 | 5 | uA | VIN = 3.6V | 9 |
| Quiescent Supply Current, VIN=3.6V | IVIN | | 19 | 25 | mA | SYNC = VIN=3.6V, fSW = 2MHz, EN = high, IOUT = 0A | 8 |
| Quiescent Supply Current, VIN=5V | IVIN | | 23 | 30 | mA | SYNC = VIN=5V, fSW = 2MHz, EN = high, IOUT = 0A | 8 |
| Shutdown Supply Current | ISD | | 4.5 | 10 | uA | SYNC=VIN=5.5V, EN=low | 8 |
| Current Limit Blanking Time | tOCON | | 17 | | clock pulses | | 8 |
| Hiccup Time | thiccup | | 8 | | ms | | 8 |
| Default Internal Output Ramping Time | tSS | | 1 | | ms | SS=SGND | 8 |
| PG Delay Time (Falling Edge) | tPGF | | 6.5 | | us | | 9 |
| OVP PG Rising Threshold | VPGR_OVP | | 0.8 | | V | | 9 |
| UVP PG Hysteresis | | | 5.4 | | % | | 9 |
| FB Bias Current | IFBLKG | | 0.1 | | uA | FB = 0.75V | 9 |
| Error Amplifier Transconductance, internal compensation | | | 126 | | uA/V | Internal Compensation | 9 |
| Error Amplifier Transconductance, external compensation | | | 132 | | uA/V | External Compensation | 9 |
| Maximum Duty Cycle | dMAX | | 100 | | % | | 9 |
| SYNC Hysteresis | | | 0.17 | | V | | 9 |
| Over-Temperature Shutdown | TOT-TH | | 150 | | °C | | 9 |
| Over-Temperature Hysteresis | TOT-HYS | | 25 | | °C | | 9 |
| Thermal Resistance, junction to air | θJA | | 33.84 | | °C/W | Junction to air; 4-layer test board 3x4.5 inch | 7 |
| Thermal Resistance, junction to case | θJC | | 16.4 | | °C/W | Junction to case; center of exposed metal pad | 7 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | The RAA210040 is integrated into a 10 Lead Dual Flat Embedded Laminate Package with exposed copper | 21 |
## CAD (KiCad official)
- Symbol: `RAA2100404GLG#HD0`
- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`
- 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files: `raa2100404glg-hd0-etched.step` / `raa2100404glg-hd0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `raa2100404glg-hd0.step` / `raa2100404glg-hd0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet, copy hosted by LCSC](docs/raa2100404glg-hd0-datasheet.pdf) (25 pp, sha256 `ca47f41a531ba331`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/raa2100404glg-hd0-datasheet.pdf)