main
Ray Publish 0.1.0 90d8f68
{
  "slug": "raa2100404glg-hd0",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS Power Modules, DFN-10(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "raa2100404glg#hd0",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "raa2100404glg-hd0.kicad_sym",
    "raa2100404glg-hd0.kicad_mod",
    "raa2100404glg-hd0.glb",
    "raa2100404glg-hd0.step",
    "raa2100404glg-hd0.lbr",
    "docs/hero.png",
    "docs/raa2100404glg-hd0-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "raa2100404glg-hd0-hero.glb",
    "raa2100404glg-hd0-hero.overlay.json"
  ],
  "component": {
    "mpn": "RAA2100404GLG#HD0",
    "manufacturer": "RENESAS",
    "package": "DFN-10(3x3)",
    "pin_count": 11,
    "category": "Power Management",
    "subcategory": "Power Modules",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/3365c4c992c1b01e34fae5a6f4e367d5.pdf",
    "parts": {
      "symbol": "raa2100404glg-hd0.kicad_sym",
      "footprint": "raa2100404glg-hd0.kicad_mod",
      "model_3d": "raa2100404glg-hd0-hero.glb",
      "model_3d_plain": "raa2100404glg-hd0.glb",
      "model_3d_step": "raa2100404glg-hd0-etched.step",
      "model_3d_step_plain": "raa2100404glg-hd0.step",
      "lbr": "raa2100404glg-hd0.lbr"
    },
    "distributor_links": {
      "lcsc": "C6164491",
      "digikey": "20-RAA2100404GLG#HD0TR-ND",
      "mouser": "968-RAA2100404GLGHD0"
    },
    "distributor_check": {
      "checked_at": "2026-11-21T04:30:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "20-RAA2100404GLG#HD0TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "968-RAA2100404GLGHD0",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground, to be connected close to the negative terminals of the external input and output capacitors."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Voltage setting pin set by an external resistor divider, with the output adjustable between 0.6V and 5V."
      },
      {
        "number": "3",
        "name": "COMP",
        "type": "passive",
        "description": "Compensation pin, the transconductance error amplifier output, connected to VIN for internal compensation or to SGND with an external network."
      },
      {
        "number": "4",
        "name": "SGND",
        "type": "power_in",
        "description": "Signal ground that must be connected to EPAD for proper electrical performance."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "power_out",
        "description": "Power output of the module, with output capacitors placed as close as possible to this pin."
      },
      {
        "number": "6",
        "name": "FS",
        "type": "input",
        "description": "Frequency selection pin where a resistor to SGND programs the switching frequency from 500kHz to 4MHz, with 2MHz default when connected to VIN."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "Module enable pin that is driven high to enable and driven low to shut down and discharge the output, and must not be left floating."
      },
      {
        "number": "8",
        "name": "SYNC",
        "type": "input",
        "description": "Synchronization pin that is tied high or to VIN for PWM mode or driven with a 500kHz to 4MHz square wave, and must not be left floating."
      },
      {
        "number": "9",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that requires a 10kΩ to 100kΩ pull-up to VIN and whose rising edge is delayed by 1ms after the output is in regulation."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Power input of the module, to be tied to the 2.7V to 5.5V input rail with at least 2x22µF X7R input capacitance placed close to the module."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet prints the exposed pad as '-' in the pin table, so it is listed here as EPAD. Its numb"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0186,
        "at": "2026-11-21T04:29:52"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/3365c4c992c1b01e34fae5a6f4e367d5.pdf",
        "pages": 25,
        "sha256": "ca47f41a531ba331",
        "source_tier": "mfr",
        "citation": "RENESAS datasheet, copy hosted by LCSC"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "raa2100404glg-hd0.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "raa2100404glg-hd0-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ed087fb70e3e3b4147e9d7eea37fd28db6e8f94b625b95c6d25f0eae0e5a4b51",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}