main
Ray Publish 0.1.1 2885ca1

PIC16F870T-I

Microchip Tech · Pre-ordered MCUs · SOIC-28-300mil

PIC16F870T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP/THV input Active-low Master Clear (Reset) input, also the programming voltage input (VPP) and High Voltage Test mode control (THV) on a Schmitt Trigger input.
2 RA0/AN0 bidirectional PORTA bidirectional I/O (TTL input) that can also serve as analog input 0.
3 RA1/AN1 bidirectional PORTA bidirectional I/O (TTL input) that can also serve as analog input 1.
4 RA2/AN2/VREF- bidirectional PORTA bidirectional I/O (TTL input) that can also serve as analog input 2 or the negative analog reference voltage.
5 RA3/AN3/VREF+ bidirectional PORTA bidirectional I/O (TTL input) that can also serve as analog input 3 or the positive analog reference voltage.
6 RA4/T0CKI bidirectional PORTA bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer0 clock input; the output is open drain.
7 RA5/AN4 bidirectional PORTA bidirectional I/O (TTL input) that can also serve as analog input 4.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI input Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS input otherwise).
10 OSC2/CLKO output Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate.
11 RC0/T1OSO/T1CKI bidirectional PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator output or Timer1 clock input.
12 RC1/T1OSI bidirectional PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator input.
13 RC2/CCP1 bidirectional PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Capture1 input, Compare1 output or PWM1 output.
14 RC3 bidirectional PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use.
15 RC4 bidirectional PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use.
16 RC5 bidirectional PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use.
17 RC6/TX/CK bidirectional PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous transmit or synchronous clock.
18 RC7/RX/DT bidirectional PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous receive or synchronous data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional PORTB bidirectional I/O (TTL/Schmitt Trigger input in interrupt mode) that can also serve as the external interrupt pin; PORTB has software-selectable weak pull-ups.
22 RB1 bidirectional PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up.
23 RB2 bidirectional PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up.
24 RB3/PGM bidirectional PORTB bidirectional I/O (TTL/Schmitt Trigger input in LVP mode) that can also serve as the low voltage programming input.
25 RB4 bidirectional PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up and interrupt-on-change.
26 RB5 bidirectional PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up and interrupt-on-change.
27 RB6/PGC bidirectional PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) that can also serve as the interrupt-on-change pin or In-Circuit Debugger pin and the serial programming clock.
28 RB7/PGD bidirectional PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) that can also serve as the interrupt-on-change pin or In-Circuit Debugger pin and the serial programming data.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (PIC16F870/871) VDD 4 5.5 V All configurations. 119
Operating voltage with BOR enabled (FMAX = 14 MHz) VBOR 5.5 V BOR enabled, FMAX = 14 MHz (Note 7), -40°C to +85°C 119
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See section on Power-on Reset for details 119
Brown-out Reset Voltage VBOR 3.7 4 4.35 V BOREN bit in configuration word enabled 119
Supply Current (XT, RC osc configuration) IDD 1.6 4 mA XT, RC osc configuration, FOSC = 4 MHz, VDD = 5.5V (Note 4) 120
Supply Current (HS osc configuration) IDD 7 15 mA HS osc configuration, FOSC = 20 MHz, VDD = 5.5V, -40°C to +85°C 120
Brown-out Reset Current IBOR 85 200 µA BOR enabled, VDD = 5.0V 120
Power-down Current (WDT enabled) IPD 10.5 42 µA VDD = 4.0V, WDT enabled, -40°C to +85°C 120
Power-down Current (WDT disabled) IPD 1.5 19 µA VDD = 4.0V, WDT disabled, -40°C to +85°C 120
Input Low Voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 121
Input Low Voltage, Ports RC3 and RC4 with SMBus VIL -0.5 0.6 V For VDD = 4.5 to 5.5V 121
Input High Voltage, I/O ports with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 121
Input High Voltage, Ports RC3 and RC4 with SMBus VIH 1.4 5.5 V For VDD = 4.5 to 5.5V 121
PORTB Weak Pull-up Current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS 121
Input Leakage Current, I/O ports IIL 1 µA VSS ≤ VPIN ≤ VDD, pin at hi-impedance 121
Input Leakage Current, MCLR and RA4/T0CKI IIL 5 µA VSS ≤ VPIN ≤ VDD 121
Input Leakage Current, OSC1 IIL 5 µA VSS ≤ VPIN ≤ VDD, XT, HS and LP osc configuration 121
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C 122
Output Low Voltage, OSC2/CLKO (RC osc config) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C 122
Open Drain High Voltage, RA4 pin VOD 8.5 V RA4 pin 122
OSC2 pin capacitive loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1. 122
All I/O pins and OSC2 capacitive loading (RC mode) CIO 50 pF All I/O pins and OSC2 (in RC mode) 122
SCL, SDA capacitive loading (I2C mode) CB 400 pF SCL, SDA in I2C mode 122
Data EEPROM Endurance ED 100 K E/W 25°C at 5V 122
VDD for read/write (EECON) VDRW 5.5 V Using EECON to read/write, VMIN = min operating voltage 122
Data EEPROM Erase/write cycle time TDEW 4 8 ms 122
Program FLASH Endurance EP 1000 E/W 25°C at 5V 122
VDD for read (program FLASH) VPR 5.5 V VMIN = min operating voltage 122
VDD for erase/write (program FLASH) 5.5 V Using EECON to read/write, VMIN = min operating voltage 122
Program FLASH Erase/Write cycle time TPEW 4 8 ms 122
Ambient temperature under bias -55 125 °C 117
Storage temperature -65 150 °C 117
Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) -0.3 V 117
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 117
Voltage on MCLR with respect to VSS 0 13.25 V Note 2 117
Voltage on RA4 with respect to VSS 0 8.5 V 117
Total power dissipation 1 W Note 1 117
Input clamp current IIK 20 mA VI < 0 or VI > VDD 117
Output clamp current IOK 20 mA VO < 0 or VO > VDD 117
Operating temperature (Industrial) TA -40 85 °C Industrial grade (PIC16F870/871-I) 121
OSC1 to CLKO TosH2ckL 75 200 ns Note 1 128
CLKO rise time TckR 35 100 ns Note 1 128
CLKO fall time TckF 35 100 ns Note 1 128
Port in hold after CLKO TckH2ioI 0 ns Note 1 128
OSC1 (Q1 cycle) to Port out valid TosH2ioV 100 255 ns 128
OSC1 (Q2 cycle) to Port input invalid (I/O in hold time) TosH2ioI 100 ns Standard (F) 128
Port input valid to OSC1 (I/O in setup time) TioV2osH 0 ns 128
Port output rise time TIOR 10 40 ns Standard (F) 128
Port output fall time TIOF 10 40 ns Standard (F) 128

CAD (KiCad official)

  • Symbol: PIC16F870T-I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f870t-i-so-etched.step / pic16f870t-i-so-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f870t-i-so.step / pic16f870t-i-so.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (172 pp, sha256 4c6d10498b8dc240, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF