3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16F870T-I
Microchip Tech · Pre-ordered MCUs · SOIC-28-300mil
PIC16F870T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/THV | input | Active-low Master Clear (Reset) input, also the programming voltage input (VPP) and High Voltage Test mode control (THV) on a Schmitt Trigger input. |
| 2 | RA0/AN0 | bidirectional | PORTA bidirectional I/O (TTL input) that can also serve as analog input 0. |
| 3 | RA1/AN1 | bidirectional | PORTA bidirectional I/O (TTL input) that can also serve as analog input 1. |
| 4 | RA2/AN2/VREF- | bidirectional | PORTA bidirectional I/O (TTL input) that can also serve as analog input 2 or the negative analog reference voltage. |
| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bidirectional I/O (TTL input) that can also serve as analog input 3 or the positive analog reference voltage. |
| 6 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer0 clock input; the output is open drain. |
| 7 | RA5/AN4 | bidirectional | PORTA bidirectional I/O (TTL input) that can also serve as analog input 4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS input otherwise). |
| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator output or Timer1 clock input. |
| 12 | RC1/T1OSI | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator input. |
| 13 | RC2/CCP1 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Capture1 input, Compare1 output or PWM1 output. |
| 14 | RC3 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use. |
| 15 | RC4 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use. |
| 16 | RC5 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use. |
| 17 | RC6/TX/CK | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous transmit or synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous receive or synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger input in interrupt mode) that can also serve as the external interrupt pin; PORTB has software-selectable weak pull-ups. |
| 22 | RB1 | bidirectional | PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up. |
| 23 | RB2 | bidirectional | PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up. |
| 24 | RB3/PGM | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger input in LVP mode) that can also serve as the low voltage programming input. |
| 25 | RB4 | bidirectional | PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up and interrupt-on-change. |
| 26 | RB5 | bidirectional | PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up and interrupt-on-change. |
| 27 | RB6/PGC | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) that can also serve as the interrupt-on-change pin or In-Circuit Debugger pin and the serial programming clock. |
| 28 | RB7/PGD | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) that can also serve as the interrupt-on-change pin or In-Circuit Debugger pin and the serial programming data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (PIC16F870/871) | VDD | 4 | 5.5 | V | All configurations. | 119 | |
| Operating voltage with BOR enabled (FMAX = 14 MHz) | VBOR | 5.5 | V | BOR enabled, FMAX = 14 MHz (Note 7), -40°C to +85°C | 119 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 119 | ||
| Brown-out Reset Voltage | VBOR | 3.7 | 4 | 4.35 | V | BOREN bit in configuration word enabled | 119 |
| Supply Current (XT, RC osc configuration) | IDD | 1.6 | 4 | mA | XT, RC osc configuration, FOSC = 4 MHz, VDD = 5.5V (Note 4) | 120 | |
| Supply Current (HS osc configuration) | IDD | 7 | 15 | mA | HS osc configuration, FOSC = 20 MHz, VDD = 5.5V, -40°C to +85°C | 120 | |
| Brown-out Reset Current | IBOR | 85 | 200 | µA | BOR enabled, VDD = 5.0V | 120 | |
| Power-down Current (WDT enabled) | IPD | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40°C to +85°C | 120 | |
| Power-down Current (WDT disabled) | IPD | 1.5 | 19 | µA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 120 | |
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 121 | ||
| Input Low Voltage, Ports RC3 and RC4 with SMBus | VIL | -0.5 | 0.6 | V | For VDD = 4.5 to 5.5V | 121 | |
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 121 | ||
| Input High Voltage, Ports RC3 and RC4 with SMBus | VIH | 1.4 | 5.5 | V | For VDD = 4.5 to 5.5V | 121 | |
| PORTB Weak Pull-up Current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 121 |
| Input Leakage Current, I/O ports | IIL | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at hi-impedance | 121 | ||
| Input Leakage Current, MCLR and RA4/T0CKI | IIL | 5 | µA | VSS ≤ VPIN ≤ VDD | 121 | ||
| Input Leakage Current, OSC1 | IIL | 5 | µA | VSS ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 121 | ||
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 122 | ||
| Output Low Voltage, OSC2/CLKO (RC osc config) | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 122 | ||
| Open Drain High Voltage, RA4 pin | VOD | 8.5 | V | RA4 pin | 122 | ||
| OSC2 pin capacitive loading | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1. | 122 | ||
| All I/O pins and OSC2 capacitive loading (RC mode) | CIO | 50 | pF | All I/O pins and OSC2 (in RC mode) | 122 | ||
| SCL, SDA capacitive loading (I2C mode) | CB | 400 | pF | SCL, SDA in I2C mode | 122 | ||
| Data EEPROM Endurance | ED | 100 | K E/W | 25°C at 5V | 122 | ||
| VDD for read/write (EECON) | VDRW | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 | ||
| Data EEPROM Erase/write cycle time | TDEW | 4 | 8 | ms | 122 | ||
| Program FLASH Endurance | EP | 1000 | E/W | 25°C at 5V | 122 | ||
| VDD for read (program FLASH) | VPR | 5.5 | V | VMIN = min operating voltage | 122 | ||
| VDD for erase/write (program FLASH) | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 | |||
| Program FLASH Erase/Write cycle time | TPEW | 4 | 8 | ms | 122 | ||
| Ambient temperature under bias | -55 | 125 | °C | 117 | |||
| Storage temperature | -65 | 150 | °C | 117 | |||
| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) | -0.3 | V | 117 | ||||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 117 | ||
| Voltage on MCLR with respect to VSS | 0 | 13.25 | V | Note 2 | 117 | ||
| Voltage on RA4 with respect to VSS | 0 | 8.5 | V | 117 | |||
| Total power dissipation | 1 | W | Note 1 | 117 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 117 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 117 | ||
| Operating temperature (Industrial) | TA | -40 | 85 | °C | Industrial grade (PIC16F870/871-I) | 121 | |
| OSC1 to CLKO | TosH2ckL | 75 | 200 | ns | Note 1 | 128 | |
| CLKO rise time | TckR | 35 | 100 | ns | Note 1 | 128 | |
| CLKO fall time | TckF | 35 | 100 | ns | Note 1 | 128 | |
| Port in hold after CLKO | TckH2ioI | 0 | ns | Note 1 | 128 | ||
| OSC1 (Q1 cycle) to Port out valid | TosH2ioV | 100 | 255 | ns | 128 | ||
| OSC1 (Q2 cycle) to Port input invalid (I/O in hold time) | TosH2ioI | 100 | ns | Standard (F) | 128 | ||
| Port input valid to OSC1 (I/O in setup time) | TioV2osH | 0 | ns | 128 | |||
| Port output rise time | TIOR | 10 | 40 | ns | Standard (F) | 128 | |
| Port output fall time | TIOF | 10 | 40 | ns | Standard (F) | 128 |
CAD (KiCad official)
- Symbol:
PIC16F870T-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16f870t-i-so-etched.step/pic16f870t-i-so-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f870t-i-so.step/pic16f870t-i-so.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (172 pp, sha256
4c6d10498b8dc240, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).