← Commit history
README.md+67−73
@@ -2,40 +2,40 @@  **Microchip Tech** · Pre-ordered MCUs · SOIC-28-300mil -PIC16F870T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+PIC16F870T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | MCLR/VPP/THV | input | Master Clear (Reset) input, programming voltage input, or High Voltage Test mode control; an active low RESET to the device. |-| 2 | RA0/AN0 | bidirectional | PORTA bit 0 bi-directional I/O (TTL input); can also be analog input 0. |-| 3 | RA1/AN1 | bidirectional | PORTA bit 1 bi-directional I/O (TTL input); can also be analog input 1. |-| 4 | RA2/AN2/VREF- | bidirectional | PORTA bit 2 bi-directional I/O (TTL input); can also be analog input 2 or the negative analog reference voltage. |-| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bit 3 bi-directional I/O (TTL input); can also be analog input 3 or the positive analog reference voltage. |-| 6 | RA4/T0CKI | bidirectional | PORTA bit 4 bi-directional I/O (Schmitt Trigger input, open drain output); can also be the clock input to the Timer0 module. |-| 7 | RA5/AN4 | bidirectional | PORTA bit 5 bi-directional I/O (TTL input); can also be analog input 4. |+| 1 | MCLR/VPP/THV | input | Active-low Master Clear (Reset) input, also the programming voltage input (VPP) and High Voltage Test mode control (THV) on a Schmitt Trigger input. |+| 2 | RA0/AN0 | bidirectional | PORTA bidirectional I/O (TTL input) that can also serve as analog input 0. |+| 3 | RA1/AN1 | bidirectional | PORTA bidirectional I/O (TTL input) that can also serve as analog input 1. |+| 4 | RA2/AN2/VREF- | bidirectional | PORTA bidirectional I/O (TTL input) that can also serve as analog input 2 or the negative analog reference voltage. |+| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bidirectional I/O (TTL input) that can also serve as analog input 3 or the positive analog reference voltage. |+| 6 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer0 clock input; the output is open drain. |+| 7 | RA5/AN4 | bidirectional | PORTA bidirectional I/O (TTL input) that can also serve as analog input 4. | | 8 | VSS | power_in | Ground reference for logic and I/O pins. | | 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS input otherwise). |-| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to a crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |-| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bit 0 bi-directional I/O (Schmitt Trigger input); can also be the Timer1 oscillator output or Timer1 clock input. |-| 12 | RC1/T1OSI | bidirectional | PORTC bit 1 bi-directional I/O (Schmitt Trigger input); can also be the Timer1 oscillator input. |-| 13 | RC2/CCP1 | bidirectional | PORTC bit 2 bi-directional I/O (Schmitt Trigger input); can also be the Capture1 input, Compare1 output, or PWM1 output. |-| 14 | RC3 | bidirectional | PORTC bit 3 bi-directional I/O (Schmitt Trigger input). |-| 15 | RC4 | bidirectional | PORTC bit 4 bi-directional I/O (Schmitt Trigger input). |-| 16 | RC5 | bidirectional | PORTC bit 5 bi-directional I/O (Schmitt Trigger input). |-| 17 | RC6/TX/CK | bidirectional | PORTC bit 6 bi-directional I/O (Schmitt Trigger input); can also be the USART asynchronous transmit or synchronous clock. |-| 18 | RC7/RX/DT | bidirectional | PORTC bit 7 bi-directional I/O (Schmitt Trigger input); can also be the USART asynchronous receive or synchronous data. |+| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |+| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator output or Timer1 clock input. |+| 12 | RC1/T1OSI | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator input. |+| 13 | RC2/CCP1 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Capture1 input, Compare1 output or PWM1 output. |+| 14 | RC3 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use. |+| 15 | RC4 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use. |+| 16 | RC5 | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use. |+| 17 | RC6/TX/CK | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous transmit or synchronous clock. |+| 18 | RC7/RX/DT | bidirectional | PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous receive or synchronous data. | | 19 | VSS | power_in | Ground reference for logic and I/O pins. | | 20 | VDD | power_in | Positive supply for logic and I/O pins. |-| 21 | RB0/INT | bidirectional | PORTB bit 0 bi-directional I/O (TTL/Schmitt Trigger input when configured as external interrupt); can also be the external interrupt pin. |-| 22 | RB1 | bidirectional | PORTB bit 1 bi-directional I/O (TTL input) with software-programmable weak pull-up. |-| 23 | RB2 | bidirectional | PORTB bit 2 bi-directional I/O (TTL input) with software-programmable weak pull-up. |-| 24 | RB3/PGM | bidirectional | PORTB bit 3 bi-directional I/O (TTL/Schmitt Trigger input); can also be the low voltage programming input. |-| 25 | RB4 | bidirectional | PORTB bit 4 bi-directional I/O (TTL input); interrupt-on-change pin. |-| 26 | RB5 | bidirectional | PORTB bit 5 bi-directional I/O (TTL input); interrupt-on-change pin. |-| 27 | RB6/PGC | bidirectional | PORTB bit 6 bi-directional I/O (TTL/Schmitt Trigger input); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock. |-| 28 | RB7/PGD | bidirectional | PORTB bit 7 bi-directional I/O (TTL/Schmitt Trigger input); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data. |+| 21 | RB0/INT | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger input in interrupt mode) that can also serve as the external interrupt pin; PORTB has software-selectable weak pull-ups. |+| 22 | RB1 | bidirectional | PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up. |+| 23 | RB2 | bidirectional | PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up. |+| 24 | RB3/PGM | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger input in LVP mode) that can also serve as the low voltage programming input. |+| 25 | RB4 | bidirectional | PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up and interrupt-on-change. |+| 26 | RB5 | bidirectional | PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up and interrupt-on-change. |+| 27 | RB6/PGC | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) that can also serve as the interrupt-on-change pin or In-Circuit Debugger pin and the serial programming clock. |+| 28 | RB7/PGD | bidirectional | PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) that can also serve as the interrupt-on-change pin or In-Circuit Debugger pin and the serial programming data. |  ## Key specifications @@ -52,61 +52,55 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage (BOR-independent operating range, PIC16F870/871) | VDD | 4 |  | 5.5 | V | All configurations. PIC16F870/871 (F part, not LF) | 119 |-| Brown-out Reset supply limit, max VDD for BOR-enabled operation | VBOR |  |  | 5.5 | V | BOR enabled, FMAX = 14 MHz (Note 7), -40C to +85C | 119 |-| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 |  |  | V/ms | See section on Power-on Reset for details | 119 |-| Brown-out Reset voltage | VBOR | 3.7 | 4 | 4.35 | V | BOREN bit in configuration word enabled | 119 |-| Supply current (XT, RC oscillator configuration) | IDD |  | 1.6 | 4 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) | 120 |-| Supply current (HS oscillator configuration, 20 MHz) | IDD |  | 7 | 15 | mA | HS osc configuration FOSC = 20 MHz, VDD = 5.5V, -40C to +85C | 120 |-| Brown-out Reset current | IBOR |  | 85 | 200 | uA | BOR enabled, VDD = 5.0V | 120 |-| Power-down current (WDT enabled, VDD 4.0V, -40C to +85C) | IPD |  | 10.5 | 42 | uA | VDD = 4.0V, WDT enabled, -40C to +85C | 120 |-| Power-down current (WDT disabled, VDD 4.0V, -40C to +85C) | IPD |  | 1.5 | 19 | uA | VDD = 4.0V, WDT disabled, -40C to +85C | 120 |-| Input low voltage, I/O ports with TTL buffer | VIL |  |  | 0.8 | V | 4.5V <= VDD <= 5.5V | 121 |-| Input low voltage, SMBus (RC3, RC4) | VIL | -0.5 |  | 0.6 | V | For VDD = 4.5 to 5.5V | 121 |-| Input high voltage, I/O ports with TTL buffer | VIH | 2 |  |  | V | 4.5V <= VDD <= 5.5V | 121 |-| Input high voltage, SMBus (RC3, RC4) | VIH | 1.4 |  | 5.5 | V | for VDD = 4.5 to 5.5V | 121 |-| Input leakage current, I/O ports | IIL |  |  | 1 | uA | Vss <= VPIN <= VDD, pin at hi-impedance | 121 |-| Input leakage current, MCLR and RA4/T0CKI | IIL |  |  | 5 | uA | Vss <= VPIN <= VDD | 121 |-| Input leakage current, OSC1 | IIL |  |  | 5 | uA | Vss <= VPIN <= VDD, XT, HS and LP osc configuration | 121 |-| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | uA | VDD = 5V, VPIN = VSS | 121 |-| Output low voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 122 |-| Output low voltage, OSC2/CLKO (RC osc config) | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40C to +85C | 122 |-| Open drain high voltage, RA4 pin | VOD |  |  | 8.5 | V | RA4 pin | 122 |-| OSC2 pin capacitive loading | COSC2 |  |  | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 122 |-| All I/O pins and OSC2 (RC mode) capacitive loading | CIO |  |  | 50 | pF |  | 122 |-| SCL, SDA capacitive loading (I2C mode) | CB |  |  | 400 | pF |  | 122 |-| Data EEPROM endurance | ED | 100 |  |  | K E/W | 25C at 5V | 122 |-| VDD for read/write (EECON), max | VDRW |  |  | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 |-| Data EEPROM erase/write cycle time | TDEW |  | 4 | 8 | ms |  | 122 |-| Program FLASH endurance | EP | 1000 |  |  | E/W | 25C at 5V | 122 |-| VDD for read (program FLASH), max | VPR |  |  | 5.5 | V | VMIN = min operating voltage | 122 |-| VDD for erase/write (program FLASH), max |  |  |  | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 |-| Program FLASH erase/write cycle time | TPEW |  | 4 | 8 | ms |  | 122 |-| Operating temperature (Industrial) | TA | -40 |  | 85 | °C | Industrial | 119 |+| Supply Voltage (PIC16F870/871) | VDD | 4 |  | 5.5 | V | All configurations. | 119 |+| Operating voltage with BOR enabled (FMAX = 14 MHz) | VBOR |  |  | 5.5 | V | BOR enabled, FMAX = 14 MHz (Note 7), -40°C to +85°C | 119 |+| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 |  |  | V/ms | See section on Power-on Reset for details | 119 |+| Brown-out Reset Voltage | VBOR | 3.7 | 4 | 4.35 | V | BOREN bit in configuration word enabled | 119 |+| Supply Current (XT, RC osc configuration) | IDD |  | 1.6 | 4 | mA | XT, RC osc configuration, FOSC = 4 MHz, VDD = 5.5V (Note 4) | 120 |+| Supply Current (HS osc configuration) | IDD |  | 7 | 15 | mA | HS osc configuration, FOSC = 20 MHz, VDD = 5.5V, -40°C to +85°C | 120 |+| Brown-out Reset Current | IBOR |  | 85 | 200 | µA | BOR enabled, VDD = 5.0V | 120 |+| Power-down Current (WDT enabled) | IPD |  | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40°C to +85°C | 120 |+| Power-down Current (WDT disabled) | IPD |  | 1.5 | 19 | µA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 120 |+| Input Low Voltage, I/O ports with TTL buffer | VIL |  |  | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 121 |+| Input Low Voltage, Ports RC3 and RC4 with SMBus | VIL | -0.5 |  | 0.6 | V | For VDD = 4.5 to 5.5V | 121 |+| Input High Voltage, I/O ports with TTL buffer | VIH | 2 |  |  | V | 4.5V ≤ VDD ≤ 5.5V | 121 |+| Input High Voltage, Ports RC3 and RC4 with SMBus | VIH | 1.4 |  | 5.5 | V | For VDD = 4.5 to 5.5V | 121 |+| PORTB Weak Pull-up Current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 121 |+| Input Leakage Current, I/O ports | IIL |  |  | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at hi-impedance | 121 |+| Input Leakage Current, MCLR and RA4/T0CKI | IIL |  |  | 5 | µA | VSS ≤ VPIN ≤ VDD | 121 |+| Input Leakage Current, OSC1 | IIL |  |  | 5 | µA | VSS ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 121 |+| Output Low Voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 122 |+| Output Low Voltage, OSC2/CLKO (RC osc config) | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 122 |+| Open Drain High Voltage, RA4 pin | VOD |  |  | 8.5 | V | RA4 pin | 122 |+| OSC2 pin capacitive loading | COSC2 |  |  | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1. | 122 |+| All I/O pins and OSC2 capacitive loading (RC mode) | CIO |  |  | 50 | pF | All I/O pins and OSC2 (in RC mode) | 122 |+| SCL, SDA capacitive loading (I2C mode) | CB |  |  | 400 | pF | SCL, SDA in I2C mode | 122 |+| Data EEPROM Endurance | ED | 100 |  |  | K E/W | 25°C at 5V | 122 |+| VDD for read/write (EECON) | VDRW |  |  | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 |+| Data EEPROM Erase/write cycle time | TDEW |  | 4 | 8 | ms |  | 122 |+| Program FLASH Endurance | EP | 1000 |  |  | E/W | 25°C at 5V | 122 |+| VDD for read (program FLASH) | VPR |  |  | 5.5 | V | VMIN = min operating voltage | 122 |+| VDD for erase/write (program FLASH) |  |  |  | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 |+| Program FLASH Erase/Write cycle time | TPEW |  | 4 | 8 | ms |  | 122 | | Ambient temperature under bias |  | -55 |  | 125 | °C |  | 117 | | Storage temperature |  | -65 |  | 150 | °C |  | 117 |+| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) |  | -0.3 |  |  | V |  | 117 | | Voltage on VDD with respect to VSS | VDD | -0.3 |  | 7.5 | V |  | 117 | | Voltage on MCLR with respect to VSS |  | 0 |  | 13.25 | V | Note 2 | 117 | | Voltage on RA4 with respect to VSS |  | 0 |  | 8.5 | V |  | 117 | | Total power dissipation |  |  |  | 1 | W | Note 1 | 117 | | Input clamp current | IIK |  |  | 20 | mA | VI < 0 or VI > VDD | 117 | | Output clamp current | IOK |  |  | 20 | mA | VO < 0 or VO > VDD | 117 |-| External CLKI frequency, XT Osc mode (min) | FOSC | 0.1 |  | 4 | MHz | XT Osc mode | 127 |-| External CLKI frequency, HS Osc mode | FOSC | 4 |  | 20 | MHz | HS Osc mode | 127 |-| External clock input period, XT and RC Osc mode | TOSC | 250 |  |  | ns | XT and RC Osc mode | 127 |-| External clock input period, HS Osc mode (-20) | TOSC | 50 |  |  | ns | HS Osc mode (-20) | 127 |-| External clock in (OSC1) low or high time, XT oscillator | TosL,TosH | 100 |  |  | ns | XT oscillator | 127 |-| External clock in (OSC1) low or high time, HS oscillator | TosL,TosH | 15 |  |  | ns | HS oscillator | 127 |-| External clock in (OSC1) rise or fall time, XT oscillator | TosR,TosF |  |  | 25 | ns | XT oscillator | 127 |-| OSC1 to CLKO | TosH2ckL |  | 75 | 200 | ns | (Note 1) | 128 |-| CLKO rise time | TckR |  | 35 | 100 | ns | (Note 1) | 128 |-| CLKO fall time | TckF |  | 35 | 100 | ns | (Note 1) | 128 |-| Port in hold after CLKO | TckH2ioI | 0 |  |  | ns | (Note 1) | 128 |-| OSC1 (Q1 cycle) to port out valid | TosH2ioV |  | 100 | 255 | ns |  | 128 |-| OSC1 (Q2 cycle) to port input invalid (I/O in hold time), Standard (F) | TosH2ioI | 100 |  |  | ns | Standard (F) | 128 |-| Port input valid to OSC1 (I/O in setup time) | TioV2osH | 0 |  |  | ns | (Note 1) | 128 |-| Port output rise time, Standard (F) | TIOR |  | 10 | 40 | ns | Standard (F) | 128 |-| Port output fall time, Standard (F) | TIOF |  | 10 | 40 | ns | Standard (F) | 128 |+| Operating temperature (Industrial) | TA | -40 |  | 85 | °C | Industrial grade (PIC16F870/871-I) | 121 |+| OSC1 to CLKO | TosH2ckL |  | 75 | 200 | ns | Note 1 | 128 |+| CLKO rise time | TckR |  | 35 | 100 | ns | Note 1 | 128 |+| CLKO fall time | TckF |  | 35 | 100 | ns | Note 1 | 128 |+| Port in hold after CLKO | TckH2ioI | 0 |  |  | ns | Note 1 | 128 |+| OSC1 (Q1 cycle) to Port out valid | TosH2ioV |  | 100 | 255 | ns |  | 128 |+| OSC1 (Q2 cycle) to Port input invalid (I/O in hold time) | TosH2ioI | 100 |  |  | ns | Standard (F) | 128 |+| Port input valid to OSC1 (I/O in setup time) | TioV2osH | 0 |  |  | ns |  | 128 |+| Port output rise time | TIOR |  | 10 | 40 | ns | Standard (F) | 128 |+| Port output fall time | TIOF |  | 10 | 40 | ns | Standard (F) | 128 |  ## CAD (KiCad official) @@ -119,7 +113,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](docs/pic16f870t-i-so-datasheet.pdf) (172 pp, sha256 `4c6d10498b8dc240`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](docs/pic16f870t-i-so-datasheet.pdf) (172 pp, sha256 `4c6d10498b8dc240`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+36−38
@@ -1,6 +1,6 @@ {   "slug": "pic16f870t-i-so",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Pre-ordered MCUs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic16f870t-i-so-hero.glb",-    "pic16f870t-i-so-hero.overlay.json",-    "pic16f870t-i-so-etched.glb"+    "pic16f870t-i-so-hero.overlay.json"   ],   "component": {     "mpn": "PIC16F870T-I/SO",@@ -43,7 +42,7 @@       "symbol": "pic16f870t-i-so.kicad_sym",       "footprint": "pic16f870t-i-so.kicad_mod",       "model_3d": "pic16f870t-i-so-hero.glb",-      "model_3d_plain": "pic16f870t-i-so-etched.glb",+      "model_3d_plain": "pic16f870t-i-so.glb",       "model_3d_step": "pic16f870t-i-so-etched.step",       "model_3d_step_plain": "pic16f870t-i-so.step",       "lbr": "pic16f870t-i-so.lbr"@@ -54,12 +53,11 @@       "mouser": "579-PIC16F870T-I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:56:47Z",+      "checked_at": "2026-11-17T19:51:05Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16F870T-I/SOTR-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "579-PIC16F870T-I/SO",@@ -72,43 +70,43 @@         "number": "1",         "name": "MCLR/VPP/THV",         "type": "input",-        "description": "Master Clear (Reset) input, programming voltage input, or High Voltage Test mode control; an active low RESET to the device."+        "description": "Active-low Master Clear (Reset) input, also the programming voltage input (VPP) and High Voltage Test mode control (THV) on a Schmitt Trigger input."       },       {         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "PORTA bit 0 bi-directional I/O (TTL input); can also be analog input 0."+        "description": "PORTA bidirectional I/O (TTL input) that can also serve as analog input 0."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "PORTA bit 1 bi-directional I/O (TTL input); can also be analog input 1."+        "description": "PORTA bidirectional I/O (TTL input) that can also serve as analog input 1."       },       {         "number": "4",         "name": "RA2/AN2/VREF-",         "type": "bidirectional",-        "description": "PORTA bit 2 bi-directional I/O (TTL input); can also be analog input 2 or the negative analog reference voltage."+        "description": "PORTA bidirectional I/O (TTL input) that can also serve as analog input 2 or the negative analog reference voltage."       },       {         "number": "5",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "PORTA bit 3 bi-directional I/O (TTL input); can also be analog input 3 or the positive analog reference voltage."+        "description": "PORTA bidirectional I/O (TTL input) that can also serve as analog input 3 or the positive analog reference voltage."       },       {         "number": "6",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "PORTA bit 4 bi-directional I/O (Schmitt Trigger input, open drain output); can also be the clock input to the Timer0 module."+        "description": "PORTA bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer0 clock input; the output is open drain."       },       {         "number": "7",         "name": "RA5/AN4",         "type": "bidirectional",-        "description": "PORTA bit 5 bi-directional I/O (TTL input); can also be analog input 4."+        "description": "PORTA bidirectional I/O (TTL input) that can also serve as analog input 4."       },       {         "number": "8",@@ -126,55 +124,55 @@         "number": "10",         "name": "OSC2/CLKO",         "type": "output",-        "description": "Oscillator crystal output connecting to a crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."       },       {         "number": "11",         "name": "RC0/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "PORTC bit 0 bi-directional I/O (Schmitt Trigger input); can also be the Timer1 oscillator output or Timer1 clock input."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator output or Timer1 clock input."       },       {         "number": "12",         "name": "RC1/T1OSI",         "type": "bidirectional",-        "description": "PORTC bit 1 bi-directional I/O (Schmitt Trigger input); can also be the Timer1 oscillator input."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator input."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "PORTC bit 2 bi-directional I/O (Schmitt Trigger input); can also be the Capture1 input, Compare1 output, or PWM1 output."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Capture1 input, Compare1 output or PWM1 output."       },       {         "number": "14",         "name": "RC3",         "type": "bidirectional",-        "description": "PORTC bit 3 bi-directional I/O (Schmitt Trigger input)."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use."       },       {         "number": "15",         "name": "RC4",         "type": "bidirectional",-        "description": "PORTC bit 4 bi-directional I/O (Schmitt Trigger input)."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use."       },       {         "number": "16",         "name": "RC5",         "type": "bidirectional",-        "description": "PORTC bit 5 bi-directional I/O (Schmitt Trigger input)."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use."       },       {         "number": "17",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "PORTC bit 6 bi-directional I/O (Schmitt Trigger input); can also be the USART asynchronous transmit or synchronous clock."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous transmit or synchronous clock."       },       {         "number": "18",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "PORTC bit 7 bi-directional I/O (Schmitt Trigger input); can also be the USART asynchronous receive or synchronous data."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous receive or synchronous data."       },       {         "number": "19",@@ -192,49 +190,49 @@         "number": "21",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "PORTB bit 0 bi-directional I/O (TTL/Schmitt Trigger input when configured as external interrupt); can also be the external interrupt pin."+        "description": "PORTB bidirectional I/O (TTL/Schmitt Trigger input in interrupt mode) that can also serve as the external interrupt pin; PORTB has software-selectable weak pull-ups."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "PORTB bit 1 bi-directional I/O (TTL input) with software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "PORTB bit 2 bi-directional I/O (TTL input) with software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up."       },       {         "number": "24",         "name": "RB3/PGM",         "type": "bidirectional",-        "description": "PORTB bit 3 bi-directional I/O (TTL/Schmitt Trigger input); can also be the low voltage programming input."+        "description": "PORTB bidirectional I/O (TTL/Schmitt Trigger input in LVP mode) that can also serve as the low voltage programming input."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "PORTB bit 4 bi-directional I/O (TTL input); interrupt-on-change pin."+        "description": "PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up and interrupt-on-change."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "PORTB bit 5 bi-directional I/O (TTL input); interrupt-on-change pin."+        "description": "PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up and interrupt-on-change."       },       {         "number": "27",         "name": "RB6/PGC",         "type": "bidirectional",-        "description": "PORTB bit 6 bi-directional I/O (TTL/Schmitt Trigger input); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock."+        "description": "PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) that can also serve as the interrupt-on-change pin or In-Circuit Debugger pin and the serial programming clock."       },       {         "number": "28",         "name": "RB7/PGD",         "type": "bidirectional",-        "description": "PORTB bit 7 bi-directional I/O (TTL/Schmitt Trigger input); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data."+        "description": "PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) that can also serve as the interrupt-on-change pin or In-Circuit Debugger pin and the serial programming data."       }     ],     "provenance": {@@ -248,11 +246,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The MPN suffix 'T' (tape and reel) and the SOIC-28 300 mil package hint are not defined in the suppl; Table 1-1 OSC1/CLKI pin number is printed as '99' in the extracted text (DIP and SOIC columns merged; Pin types use KiCad-style classes. The table gives I/O types only, so bidirectional was assigned to "+          "extractor flagged: The SOIC pin numbers were taken from the SOIC column of Table 1-1 (PIC16F870 pinout, page 7). The pa; The excerpt contains no electrical characteristics for this pinout (for example input/output voltage"         ],         "pages_sent": 24,-        "cost_usd": 0.1508,-        "at": "2026-11-12T04:56:17"+        "cost_usd": 0.1487,+        "at": "2026-11-17T19:50:28"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/7dde03b692207b9b21b7e11918d064f2.pdf",@@ -289,7 +287,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -307,13 +305,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "4cdc35b21e37a84868f2d17dd832f3c7229d6d15c41152859f500394c3be5060",-        "checked": "2026-11-12",+        "sha256": "ec35c50eab1d7ed17d370b4f40b5bc15056ea63e1dfaeb26db466ba2727e78f6",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO",+      "package_code": "SO (SOIC) 28-Lead Wide 300 mil",       "source_page": 152,       "D": {         "nom_mm": 17.87,
page.json+39−39
@@ -4,7 +4,7 @@   "slug": "pic16f870t-i-so",   "title": "PIC16F870T-I/SO",   "brief": "Microchip Tech Pre-ordered MCUs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "pic16f870t-i-so.kicad_sym",       "footprint": "pic16f870t-i-so.kicad_mod",       "model_3d": "pic16f870t-i-so-hero.glb",-      "model_3d_plain": "pic16f870t-i-so-etched.glb",+      "model_3d_plain": "pic16f870t-i-so.glb",       "model_3d_step": "pic16f870t-i-so-etched.step",       "model_3d_step_plain": "pic16f870t-i-so.step",       "lbr": "pic16f870t-i-so.lbr"@@ -36,12 +36,11 @@       "mouser": "579-PIC16F870T-I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:56:47Z",+      "checked_at": "2026-11-17T19:51:05Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16F870T-I/SOTR-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "579-PIC16F870T-I/SO",@@ -54,43 +53,43 @@         "number": "1",         "name": "MCLR/VPP/THV",         "type": "input",-        "description": "Master Clear (Reset) input, programming voltage input, or High Voltage Test mode control; an active low RESET to the device."+        "description": "Active-low Master Clear (Reset) input, also the programming voltage input (VPP) and High Voltage Test mode control (THV) on a Schmitt Trigger input."       },       {         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "PORTA bit 0 bi-directional I/O (TTL input); can also be analog input 0."+        "description": "PORTA bidirectional I/O (TTL input) that can also serve as analog input 0."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "PORTA bit 1 bi-directional I/O (TTL input); can also be analog input 1."+        "description": "PORTA bidirectional I/O (TTL input) that can also serve as analog input 1."       },       {         "number": "4",         "name": "RA2/AN2/VREF-",         "type": "bidirectional",-        "description": "PORTA bit 2 bi-directional I/O (TTL input); can also be analog input 2 or the negative analog reference voltage."+        "description": "PORTA bidirectional I/O (TTL input) that can also serve as analog input 2 or the negative analog reference voltage."       },       {         "number": "5",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "PORTA bit 3 bi-directional I/O (TTL input); can also be analog input 3 or the positive analog reference voltage."+        "description": "PORTA bidirectional I/O (TTL input) that can also serve as analog input 3 or the positive analog reference voltage."       },       {         "number": "6",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "PORTA bit 4 bi-directional I/O (Schmitt Trigger input, open drain output); can also be the clock input to the Timer0 module."+        "description": "PORTA bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer0 clock input; the output is open drain."       },       {         "number": "7",         "name": "RA5/AN4",         "type": "bidirectional",-        "description": "PORTA bit 5 bi-directional I/O (TTL input); can also be analog input 4."+        "description": "PORTA bidirectional I/O (TTL input) that can also serve as analog input 4."       },       {         "number": "8",@@ -108,55 +107,55 @@         "number": "10",         "name": "OSC2/CLKO",         "type": "output",-        "description": "Oscillator crystal output connecting to a crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to the crystal or resonator in crystal mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."       },       {         "number": "11",         "name": "RC0/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "PORTC bit 0 bi-directional I/O (Schmitt Trigger input); can also be the Timer1 oscillator output or Timer1 clock input."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator output or Timer1 clock input."       },       {         "number": "12",         "name": "RC1/T1OSI",         "type": "bidirectional",-        "description": "PORTC bit 1 bi-directional I/O (Schmitt Trigger input); can also be the Timer1 oscillator input."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator input."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "PORTC bit 2 bi-directional I/O (Schmitt Trigger input); can also be the Capture1 input, Compare1 output, or PWM1 output."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the Capture1 input, Compare1 output or PWM1 output."       },       {         "number": "14",         "name": "RC3",         "type": "bidirectional",-        "description": "PORTC bit 3 bi-directional I/O (Schmitt Trigger input)."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use."       },       {         "number": "15",         "name": "RC4",         "type": "bidirectional",-        "description": "PORTC bit 4 bi-directional I/O (Schmitt Trigger input)."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use."       },       {         "number": "16",         "name": "RC5",         "type": "bidirectional",-        "description": "PORTC bit 5 bi-directional I/O (Schmitt Trigger input)."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) for general-purpose use."       },       {         "number": "17",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "PORTC bit 6 bi-directional I/O (Schmitt Trigger input); can also be the USART asynchronous transmit or synchronous clock."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous transmit or synchronous clock."       },       {         "number": "18",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "PORTC bit 7 bi-directional I/O (Schmitt Trigger input); can also be the USART asynchronous receive or synchronous data."+        "description": "PORTC bidirectional I/O (Schmitt Trigger input) that can also serve as the USART asynchronous receive or synchronous data."       },       {         "number": "19",@@ -174,49 +173,49 @@         "number": "21",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "PORTB bit 0 bi-directional I/O (TTL/Schmitt Trigger input when configured as external interrupt); can also be the external interrupt pin."+        "description": "PORTB bidirectional I/O (TTL/Schmitt Trigger input in interrupt mode) that can also serve as the external interrupt pin; PORTB has software-selectable weak pull-ups."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "PORTB bit 1 bi-directional I/O (TTL input) with software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "PORTB bit 2 bi-directional I/O (TTL input) with software-programmable weak pull-up."+        "description": "PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up."       },       {         "number": "24",         "name": "RB3/PGM",         "type": "bidirectional",-        "description": "PORTB bit 3 bi-directional I/O (TTL/Schmitt Trigger input); can also be the low voltage programming input."+        "description": "PORTB bidirectional I/O (TTL/Schmitt Trigger input in LVP mode) that can also serve as the low voltage programming input."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "PORTB bit 4 bi-directional I/O (TTL input); interrupt-on-change pin."+        "description": "PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up and interrupt-on-change."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "PORTB bit 5 bi-directional I/O (TTL input); interrupt-on-change pin."+        "description": "PORTB bidirectional I/O (TTL input) with software-selectable weak pull-up and interrupt-on-change."       },       {         "number": "27",         "name": "RB6/PGC",         "type": "bidirectional",-        "description": "PORTB bit 6 bi-directional I/O (TTL/Schmitt Trigger input); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock."+        "description": "PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) that can also serve as the interrupt-on-change pin or In-Circuit Debugger pin and the serial programming clock."       },       {         "number": "28",         "name": "RB7/PGD",         "type": "bidirectional",-        "description": "PORTB bit 7 bi-directional I/O (TTL/Schmitt Trigger input); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data."+        "description": "PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) that can also serve as the interrupt-on-change pin or In-Circuit Debugger pin and the serial programming data."       }     ],     "provenance": {@@ -230,11 +229,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The MPN suffix 'T' (tape and reel) and the SOIC-28 300 mil package hint are not defined in the suppl; Table 1-1 OSC1/CLKI pin number is printed as '99' in the extracted text (DIP and SOIC columns merged; Pin types use KiCad-style classes. The table gives I/O types only, so bidirectional was assigned to "+          "extractor flagged: The SOIC pin numbers were taken from the SOIC column of Table 1-1 (PIC16F870 pinout, page 7). The pa; The excerpt contains no electrical characteristics for this pinout (for example input/output voltage"         ],         "pages_sent": 24,-        "cost_usd": 0.1508,-        "at": "2026-11-12T04:56:17"+        "cost_usd": 0.1487,+        "at": "2026-11-17T19:50:28"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/7dde03b692207b9b21b7e11918d064f2.pdf",@@ -271,7 +270,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -289,13 +288,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "4cdc35b21e37a84868f2d17dd832f3c7229d6d15c41152859f500394c3be5060",-        "checked": "2026-11-12",+        "sha256": "ec35c50eab1d7ed17d370b4f40b5bc15056ea63e1dfaeb26db466ba2727e78f6",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO",+      "package_code": "SO (SOIC) 28-Lead Wide 300 mil",       "source_page": 152,       "D": {         "nom_mm": 17.87,@@ -1052,10 +1051,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic16f870t-i-so-hero.glb",-    "pic16f870t-i-so-hero.overlay.json",-    "pic16f870t-i-so-etched.glb"+    "pic16f870t-i-so-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Pre-ordered MCUs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic16f870t-i-so-hero.overlay.json+703−698
@@ -1,700 +1,705 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "PIC16F870T-I/SO",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 28,-      "span_mm": 17.11,-      "dash_mm": 0.4278,-      "gap_mm": 0.2567,-      "pad_stroke_mm": 0.09-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 28,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 1.369,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -5.15,-      5.15,-      -8.461,-      8.461-    ],-    "pads_bbox_mm": [-      -5.675,-      5.675,-      -8.555,-      8.555-    ],-    "seating_z_mm": 0.001-  },-  "sources": {-    "glb": "pic16f870t-i-so-etched.glb",-    "glb_sha256": "5ccc527f5a50e46e2bf8989eec29f35d3f05e5c84d1bd3836f38718750b7dbf5",-    "footprint": "pic16f870t-i-so.kicad_mod",-    "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519",-    "pins": "page.json component.pins",-    "pins_sha256": "606548272672c3e9b0f9450fafd91aa119700e51ee6c57381bdf7ee30cac1ee2"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "MCLR/VPP/THV",-      "x": -5.825,-      "y": -8.255,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "RA0/AN0",-      "x": -5.825,-      "y": -6.985,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "RA1/AN1",-      "x": -5.825,-      "y": -5.715,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "RA2/AN2/VREF-",-      "x": -5.825,-      "y": -4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "RA3/AN3/VREF+",-      "x": -5.825,-      "y": -3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "RA4/T0CKI",-      "x": -5.825,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "RA5/AN4",-      "x": -5.825,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "VSS",-      "x": -5.825,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "9",-      "text": "OSC1/CLKI",-      "x": -5.825,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "10",-      "text": "OSC2/CLKO",-      "x": -5.825,-      "y": 3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "11",-      "text": "RC0/T1OSO/T1CKI",-      "x": -5.825,-      "y": 4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "12",-      "text": "RC1/T1OSI",-      "x": -5.825,-      "y": 5.715,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "13",-      "text": "RC2/CCP1",-      "x": -5.825,-      "y": 6.985,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "14",-      "text": "RC3",-      "x": -5.825,-      "y": 8.255,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "15",-      "text": "RC4",-      "x": 5.825,-      "y": 8.255,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "16",-      "text": "RC5",-      "x": 5.825,-      "y": 6.985,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "17",-      "text": "RC6/TX/CK",-      "x": 5.825,-      "y": 5.715,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "18",-      "text": "RC7/RX/DT",-      "x": 5.825,-      "y": 4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "19",-      "text": "VSS",-      "x": 5.825,-      "y": 3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "20",-      "text": "VDD",-      "x": 5.825,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "21",-      "text": "RB0/INT",-      "x": 5.825,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "22",-      "text": "RB1",-      "x": 5.825,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "23",-      "text": "RB2",-      "x": 5.825,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "24",-      "text": "RB3/PGM",-      "x": 5.825,-      "y": -3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "25",-      "text": "RB4",-      "x": 5.825,-      "y": -4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "26",-      "text": "RB5",-      "x": 5.825,-      "y": -5.715,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "27",-      "text": "RB6/PGC",-      "x": 5.825,-      "y": -6.985,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "28",-      "text": "RB7/PGD",-      "x": 5.825,-      "y": -8.255,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+ "spec": "adom-hero 1.4",+ "mpn": "PIC16F870T-I",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 28,+   "span_mm": 17.11,+   "dash_mm": 0.4278,+   "gap_mm": 0.2567,+   "pad_stroke_mm": 0.09+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 28,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 1.369,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -5.15,+   5.15,+   -8.461,+   8.461   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -8.255-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        8.255-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        8.255-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "19",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "20",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "21",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "22",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "23",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "24",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "25",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "26",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "27",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "28",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -8.255-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "pads_bbox_mm": [+   -5.675,+   5.675,+   -8.555,+   8.555+  ],+  "seating_z_mm": 0.001+ },+ "sources": {+  "glb": "pic16f870t-i-so-etched.glb",+  "glb_sha256": "5ccc527f5a50e46e2bf8989eec29f35d3f05e5c84d1bd3836f38718750b7dbf5",+  "footprint": "pic16f870t-i-so.kicad_mod",+  "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519",+  "pins": "page.json component.pins",+  "pins_sha256": "606548272672c3e9b0f9450fafd91aa119700e51ee6c57381bdf7ee30cac1ee2"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "MCLR/VPP/THV",+   "x": -5.825,+   "y": -8.255,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "RA0/AN0",+   "x": -5.825,+   "y": -6.985,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "RA1/AN1",+   "x": -5.825,+   "y": -5.715,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "RA2/AN2/VREF-",+   "x": -5.825,+   "y": -4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "RA3/AN3/VREF+",+   "x": -5.825,+   "y": -3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "RA4/T0CKI",+   "x": -5.825,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "RA5/AN4",+   "x": -5.825,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "VSS",+   "x": -5.825,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "9",+   "text": "OSC1/CLKI",+   "x": -5.825,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "10",+   "text": "OSC2/CLKO",+   "x": -5.825,+   "y": 3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "11",+   "text": "RC0/T1OSO/T1CKI",+   "x": -5.825,+   "y": 4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "12",+   "text": "RC1/T1OSI",+   "x": -5.825,+   "y": 5.715,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "13",+   "text": "RC2/CCP1",+   "x": -5.825,+   "y": 6.985,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "14",+   "text": "RC3",+   "x": -5.825,+   "y": 8.255,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "15",+   "text": "RC4",+   "x": 5.825,+   "y": 8.255,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "16",+   "text": "RC5",+   "x": 5.825,+   "y": 6.985,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "17",+   "text": "RC6/TX/CK",+   "x": 5.825,+   "y": 5.715,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "18",+   "text": "RC7/RX/DT",+   "x": 5.825,+   "y": 4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "19",+   "text": "VSS",+   "x": 5.825,+   "y": 3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "20",+   "text": "VDD",+   "x": 5.825,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "21",+   "text": "RB0/INT",+   "x": 5.825,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "22",+   "text": "RB1",+   "x": 5.825,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "23",+   "text": "RB2",+   "x": 5.825,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "24",+   "text": "RB3/PGM",+   "x": 5.825,+   "y": -3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "25",+   "text": "RB4",+   "x": 5.825,+   "y": -4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "26",+   "text": "RB5",+   "x": 5.825,+   "y": -5.715,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "27",+   "text": "RB6/PGC",+   "x": 5.825,+   "y": -6.985,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "28",+   "text": "RB7/PGD",+   "x": 5.825,+   "y": -8.255,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -8.255+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    8.255+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    8.255+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "19",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "20",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "21",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "22",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "23",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "24",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "25",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "26",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "27",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "28",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -8.255+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
pic16f870t-i-so.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Pre-ordered MCUs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-28W_7.5x17.9mm_P1.27mm">   <description>SOIC-28W, 7.5 x 17.9 mm, 1.27 mm pitch. SOIC, 28 Pin</description>@@ -106,6 +106,7 @@ </packages> <symbols> <symbol name="PIC16F870T-I">+  <description>Microchip Tech Pre-ordered MCUs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-17.78" y1="17.78" x2="17.78" y2="17.78" width="0.254" layer="94"/>   <wire x1="17.78" y1="17.78" x2="17.78" y2="-20.32" width="0.254" layer="94"/>   <wire x1="17.78" y1="-20.32" x2="-17.78" y2="-20.32" width="0.254" layer="94"/>@@ -144,7 +145,7 @@ </symbols> <devicesets> <deviceset name="PIC16F870T-I" prefix="U">-  <description></description>+  <description>Microchip Tech Pre-ordered MCUs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="PIC16F870T-I" x="0" y="0"/>   </gates>@@ -180,7 +181,17 @@         <connect gate="G$1" pin="RC5" pad="16"/>         <connect gate="G$1" pin="RC4" pad="15"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="PIC16F870T-I/SO" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/7dde03b692207b9b21b7e11918d064f2.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic16f870t-i-so" constant="no"/>+          <attribute name="MOUSER_PN" value="579-PIC16F870T-I/SO" constant="no"/>+          <attribute name="DIGIKEY_PN" value="PIC16F870T-I/SOTR-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C629735" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>