Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16F73T-I/SS
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16F73T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Active-low Master Clear (RESET) Schmitt Trigger input, also the programming voltage input (VPP). |
| 2 | RA0/AN0 | bidirectional | PORTA bit 0 digital I/O with TTL input, shared with analog input 0. |
| 3 | RA1/AN1 | bidirectional | PORTA bit 1 digital I/O with TTL input, shared with analog input 1. |
| 4 | RA2/AN2 | bidirectional | PORTA bit 2 digital I/O with TTL input, shared with analog input 2. |
| 5 | RA3/AN3/VREF | bidirectional | PORTA bit 3 digital I/O with TTL input, shared with analog input 3 and the A/D reference voltage input. |
| 6 | RA4/T0CKI | bidirectional | PORTA bit 4 Schmitt Trigger digital I/O (open drain when configured as output), shared with the Timer0 external clock input. |
| 7 | RA5/SS/AN4 | bidirectional | PORTA bit 5 digital I/O with TTL input, shared with the SPI slave select input and analog input 4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input; ST buffer in RC mode, otherwise CMOS. |
| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to crystal or resonator; in RC mode outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bit 0 Schmitt Trigger digital I/O, shared with the Timer1 oscillator output and Timer1 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC bit 1 Schmitt Trigger digital I/O, shared with the Timer1 oscillator input and Capture2 input/Compare2 output/PWM2 output. |
| 13 | RC2/CCP1 | bidirectional | PORTC bit 2 Schmitt Trigger digital I/O, shared with Capture1 input/Compare1 output/PWM1 output. |
| 14 | RC3/SCK/SCL | bidirectional | PORTC bit 3 Schmitt Trigger digital I/O, shared with the synchronous serial clock for SPI mode and I2C mode. |
| 15 | RC4/SDI/SDA | bidirectional | PORTC bit 4 Schmitt Trigger digital I/O, shared with the SPI data input and I2C data I/O. |
| 16 | RC5/SDO | bidirectional | PORTC bit 5 Schmitt Trigger digital I/O, shared with the SPI data output. |
| 17 | RC6/TX/CK | bidirectional | PORTC bit 6 Schmitt Trigger digital I/O, shared with USART asynchronous transmit and USART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | PORTC bit 7 Schmitt Trigger digital I/O, shared with USART asynchronous receive and USART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | PORTB bit 0 digital I/O with software-programmable weak pull-up, TTL input (Schmitt Trigger when used as external interrupt INT). |
| 22 | RB1 | bidirectional | PORTB bit 1 digital I/O with TTL input and software-programmable weak pull-up. |
| 23 | RB2 | bidirectional | PORTB bit 2 digital I/O with TTL input and software-programmable weak pull-up. |
| 24 | RB3/PGM | bidirectional | PORTB bit 3 digital I/O with TTL input and weak pull-up option, also the low voltage ICSP programming enable pin. |
| 25 | RB4 | bidirectional | PORTB bit 4 digital I/O with TTL input and software-programmable weak pull-up. |
| 26 | RB5 | bidirectional | PORTB bit 5 digital I/O with TTL input and software-programmable weak pull-up. |
| 27 | RB6/PGC | bidirectional | PORTB bit 6 digital I/O with weak pull-up option, also the In-Circuit Debugger and ICSP programming clock (Schmitt Trigger in Serial Programming mode). |
| 28 | RB7/PGD | bidirectional | PORTB bit 7 digital I/O with weak pull-up option, also the In-Circuit Debugger and ICSP programming data (Schmitt Trigger in Serial Programming mode). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -55 | 125 | °C | 121 | |||
| Storage temperature | -65 | 150 | °C | 121 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | 121 | ||
| Voltage on MCLR with respect to VSS | 0 | 13.5 | V | Note 2 | 121 | ||
| Voltage on RA4 with respect to VSS | 0 | 12 | V | 121 | |||
| Total power dissipation | 1 | W | Note 1 | 121 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 121 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 121 | |
| Supply Voltage PIC16F7X | VDD | 4 | 5.5 | V | All configurations (D001) | 123 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Note 1 (D002) | 123 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See section on Power-on Reset for details (D004) | 123 | ||
| Brown-out Reset Voltage | VBOR | 3.65 | 4 | 4.35 | V | BODEN bit in configuration word enabled (D005) | 123 |
| Supply Current PIC16F7X, XT/RC | IDD | 0.9 | 4 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) (D010) | 124 | |
| Supply Current PIC16F7X, HS | IDD | 5.2 | 15 | mA | HS osc configuration FOSC = 20 MHz, VDD = 5.5V (D013) | 124 | |
| Brown-out Reset Current | ∆IBOR | 25 | 200 | µA | BOR enabled, VDD = 5.0V (D015) | 124 | |
| Power-down Current, WDT enabled, industrial | IPD | 5 | 42 | µA | VDD = 4.0V, WDT enabled, -40°C to +85°C (D020) | 124 | |
| Power-down Current, WDT disabled, industrial | IPD | 0.1 | 19 | µA | VDD = 4.0V, WDT disabled, -40°C to +85°C (D021) | 124 | |
| Power-down Current, WDT enabled, extended | IPD | 10.5 | 57 | µA | VDD = 4.0V, WDT enabled, -40°C to +125°C (D021A) | 124 | |
| Power-down Current, WDT disabled, extended | IPD | 1.5 | 42 | µA | VDD = 4.0V, WDT disabled, -40°C to +125°C | 124 | |
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V (D030A) | 125 | ||
| Input Low Voltage, OSC1 (XT and LP mode) | VIL | 0.3 | V | (D033) | 125 | ||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V (D040) | 125 | ||
| Input High Voltage, OSC1 (XT and LP mode) | VIH | 1.6 | V | (D042A) | 125 | ||
| PORTB Weak Pull-up Current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS (D070) | 125 |
| Input Leakage Current, I/O ports | IIL | -1 | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance (D060) | 125 | |
| Input Leakage Current, MCLR, RA4/T0CKI | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD (D061) | 125 | |
| Input Leakage Current, OSC1 | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration (D063) | 125 | |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C (D080) | 126 | ||
| Output Low Voltage, OSC2/CLKOUT (RC osc config) | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +125°C (D083) | 126 | ||
| Open Drain High Voltage | VOD | 12 | V | RA4 pin (D150) | 126 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 (D100) | 126 | ||
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | 50 | pF | (D101) | 126 | ||
| Capacitive loading, SCL, SDA in I2C mode | CB | 400 | pF | (D102) | 126 | ||
| Program FLASH Endurance | EP | 100 | 1000 | E/W | 25°C at 5V (D130) | 126 | |
| VDD for Read | VPR | 2 | 5.5 | V | (D131) | 126 | |
| A/D Resolution | NR | 8 | bits | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF (A01) | 140 | ||
| A/D Reference voltage | VREF | 2.5 | 5.5 | V | -40°C to +125°C (A20) | 140 | |
| Recommended impedance of analog voltage source | ZAIN | 10 | kΩ | (A30) | 140 | ||
| A/D conversion current (VDD) PIC16F7X | IAD | 180 | µA | Average current consumption when A/D is on (Note 1) (A40) | 140 | ||
| VREF input current | IREF | 500 | µA | During A/D Conversion cycle (A50) | 140 | ||
| A/D clock period PIC16F7X, TOSC based | TAD | 1.6 | µs | TOSC based, VREF ≥ 3.0V (130) | 141 | ||
| A/D clock period PIC16F7X, RC mode | TAD | 2 | 4 | 6 | µs | A/D RC mode (130) | 141 |
| A/D acquisition time | TACQ | 5 | µs | (132) | 141 | ||
| External CLKIN Frequency, HS osc mode | FOSC | 0 | 20 | MHz | HS osc mode (DC to 20 MHz) | 128 | |
| External CLKIN Frequency, XT osc mode | FOSC | 0 | 1 | MHz | XT osc mode (DC to 1 MHz) | 128 | |
| Instruction Cycle Time | TCY | 200 | ns | TCY = 4/FOSC | 128 | ||
| Operating temperature, industrial | TA | -40 | 85 | °C | Industrial | 123 |
CAD (KiCad official)
- Symbol:
PIC16F73T-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16f73t-i-etched.step/pic16f73t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f73t-i.step/pic16f73t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (174 pp, sha256
81a107b5141fded6, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F73T-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F73T-I/SO