main
Ray Publish 0.1.1 0695ddd
{
  "slug": "pic16f73t-i-ss",
  "version": "0.1.1",
  "type": "component",
  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "single chip microcomputer-microcontroller",
    "pic16f73t-i",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pic16f73t-i.kicad_sym",
    "pic16f73t-i.kicad_mod",
    "pic16f73t-i.glb",
    "pic16f73t-i.step",
    "pic16f73t-i.lbr",
    "docs/hero.png",
    "docs/pic16f73t-i-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pic16f73t-i-hero.glb",
    "pic16f73t-i-hero.overlay.json",
    "pic16f73t-i-etched.glb",
    "pic16f73t-i-etched.step",
    "pic16f73t-i-ss-hero.glb",
    "pic16f73t-i-ss-hero.overlay.json"
  ],
  "component": {
    "mpn": "PIC16F73T-I/SS",
    "manufacturer": "Microchip Tech",
    "package": "SSOP-28-208mil",
    "pin_count": 28,
    "category": "Single Chip Microcomputer/Microcontroller",
    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
    "datasheet": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30325b.pdf",
    "parts": {
      "symbol": "pic16f73t-i.kicad_sym",
      "footprint": "pic16f73t-i.kicad_mod",
      "model_3d": "pic16f73t-i-ss-hero.glb",
      "model_3d_plain": "pic16f73t-i-etched.glb",
      "model_3d_step": "pic16f73t-i-etched.step",
      "model_3d_step_plain": "pic16f73t-i.step",
      "lbr": "pic16f73t-i.lbr"
    },
    "distributor_links": {
      "lcsc": "C628908"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T20:44:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MCLR/VPP",
        "type": "input",
        "description": "Active-low Master Clear (RESET) Schmitt Trigger input, also the programming voltage input (VPP)."
      },
      {
        "number": "2",
        "name": "RA0/AN0",
        "type": "bidirectional",
        "description": "PORTA bit 0 digital I/O with TTL input, shared with analog input 0."
      },
      {
        "number": "3",
        "name": "RA1/AN1",
        "type": "bidirectional",
        "description": "PORTA bit 1 digital I/O with TTL input, shared with analog input 1."
      },
      {
        "number": "4",
        "name": "RA2/AN2",
        "type": "bidirectional",
        "description": "PORTA bit 2 digital I/O with TTL input, shared with analog input 2."
      },
      {
        "number": "5",
        "name": "RA3/AN3/VREF",
        "type": "bidirectional",
        "description": "PORTA bit 3 digital I/O with TTL input, shared with analog input 3 and the A/D reference voltage input."
      },
      {
        "number": "6",
        "name": "RA4/T0CKI",
        "type": "bidirectional",
        "description": "PORTA bit 4 Schmitt Trigger digital I/O (open drain when configured as output), shared with the Timer0 external clock input."
      },
      {
        "number": "7",
        "name": "RA5/SS/AN4",
        "type": "bidirectional",
        "description": "PORTA bit 5 digital I/O with TTL input, shared with the SPI slave select input and analog input 4."
      },
      {
        "number": "8",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "9",
        "name": "OSC1/CLKI",
        "type": "input",
        "description": "Oscillator crystal input or external clock source input; ST buffer in RC mode, otherwise CMOS."
      },
      {
        "number": "10",
        "name": "OSC2/CLKO",
        "type": "output",
        "description": "Oscillator crystal output connecting to crystal or resonator; in RC mode outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."
      },
      {
        "number": "11",
        "name": "RC0/T1OSO/T1CKI",
        "type": "bidirectional",
        "description": "PORTC bit 0 Schmitt Trigger digital I/O, shared with the Timer1 oscillator output and Timer1 external clock input."
      },
      {
        "number": "12",
        "name": "RC1/T1OSI/CCP2",
        "type": "bidirectional",
        "description": "PORTC bit 1 Schmitt Trigger digital I/O, shared with the Timer1 oscillator input and Capture2 input/Compare2 output/PWM2 output."
      },
      {
        "number": "13",
        "name": "RC2/CCP1",
        "type": "bidirectional",
        "description": "PORTC bit 2 Schmitt Trigger digital I/O, shared with Capture1 input/Compare1 output/PWM1 output."
      },
      {
        "number": "14",
        "name": "RC3/SCK/SCL",
        "type": "bidirectional",
        "description": "PORTC bit 3 Schmitt Trigger digital I/O, shared with the synchronous serial clock for SPI mode and I2C mode."
      },
      {
        "number": "15",
        "name": "RC4/SDI/SDA",
        "type": "bidirectional",
        "description": "PORTC bit 4 Schmitt Trigger digital I/O, shared with the SPI data input and I2C data I/O."
      },
      {
        "number": "16",
        "name": "RC5/SDO",
        "type": "bidirectional",
        "description": "PORTC bit 5 Schmitt Trigger digital I/O, shared with the SPI data output."
      },
      {
        "number": "17",
        "name": "RC6/TX/CK",
        "type": "bidirectional",
        "description": "PORTC bit 6 Schmitt Trigger digital I/O, shared with USART asynchronous transmit and USART synchronous clock."
      },
      {
        "number": "18",
        "name": "RC7/RX/DT",
        "type": "bidirectional",
        "description": "PORTC bit 7 Schmitt Trigger digital I/O, shared with USART asynchronous receive and USART synchronous data."
      },
      {
        "number": "19",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "20",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for logic and I/O pins."
      },
      {
        "number": "21",
        "name": "RB0/INT",
        "type": "bidirectional",
        "description": "PORTB bit 0 digital I/O with software-programmable weak pull-up, TTL input (Schmitt Trigger when used as external interrupt INT)."
      },
      {
        "number": "22",
        "name": "RB1",
        "type": "bidirectional",
        "description": "PORTB bit 1 digital I/O with TTL input and software-programmable weak pull-up."
      },
      {
        "number": "23",
        "name": "RB2",
        "type": "bidirectional",
        "description": "PORTB bit 2 digital I/O with TTL input and software-programmable weak pull-up."
      },
      {
        "number": "24",
        "name": "RB3/PGM",
        "type": "bidirectional",
        "description": "PORTB bit 3 digital I/O with TTL input and weak pull-up option, also the low voltage ICSP programming enable pin."
      },
      {
        "number": "25",
        "name": "RB4",
        "type": "bidirectional",
        "description": "PORTB bit 4 digital I/O with TTL input and software-programmable weak pull-up."
      },
      {
        "number": "26",
        "name": "RB5",
        "type": "bidirectional",
        "description": "PORTB bit 5 digital I/O with TTL input and software-programmable weak pull-up."
      },
      {
        "number": "27",
        "name": "RB6/PGC",
        "type": "bidirectional",
        "description": "PORTB bit 6 digital I/O with weak pull-up option, also the In-Circuit Debugger and ICSP programming clock (Schmitt Trigger in Serial Programming mode)."
      },
      {
        "number": "28",
        "name": "RB7/PGD",
        "type": "bidirectional",
        "description": "PORTB bit 7 digital I/O with weak pull-up option, also the In-Circuit Debugger and ICSP programming data (Schmitt Trigger in Serial Programming mode)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package hint says 208mil but the datasheet drawing (page 155) titles the 28-lead SSOP as 209 mil, 5."
        ],
        "pages_sent": 33,
        "cost_usd": 0.3585,
        "at": "2026-10-30T20:44:49"
      },
      "datasheet": {
        "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30325b.pdf",
        "pages": 174,
        "sha256": "81a107b5141fded6",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pic16f73t-i.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pic16f73t-i-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "184964e23465e2bde3dcd7bb63f01fd56a21610136afb8ad3e0ce58e4f4c467d",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "family": {
      "base": "PIC16F73T-I",
      "siblings": [
        "PIC16F73T-I/SO"
      ],
      "old_slug": "pic16f73t-i",
      "note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"
    }
  },
  "visibility": "public"
}