main
Ray pic16f73t-i-ss: renamed from pic16f73t-i, the part it was built from (PIC16F73T-I/SS); family listed 83cf9cc

PIC16F73T-I/SS

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC16F73T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Active-low Master Clear (RESET) Schmitt Trigger input, also the programming voltage input (VPP).
2 RA0/AN0 bidirectional PORTA bit 0 digital I/O with TTL input, shared with analog input 0.
3 RA1/AN1 bidirectional PORTA bit 1 digital I/O with TTL input, shared with analog input 1.
4 RA2/AN2 bidirectional PORTA bit 2 digital I/O with TTL input, shared with analog input 2.
5 RA3/AN3/VREF bidirectional PORTA bit 3 digital I/O with TTL input, shared with analog input 3 and the A/D reference voltage input.
6 RA4/T0CKI bidirectional PORTA bit 4 Schmitt Trigger digital I/O (open drain when configured as output), shared with the Timer0 external clock input.
7 RA5/SS/AN4 bidirectional PORTA bit 5 digital I/O with TTL input, shared with the SPI slave select input and analog input 4.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI input Oscillator crystal input or external clock source input; ST buffer in RC mode, otherwise CMOS.
10 OSC2/CLKO output Oscillator crystal output connecting to crystal or resonator; in RC mode outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate.
11 RC0/T1OSO/T1CKI bidirectional PORTC bit 0 Schmitt Trigger digital I/O, shared with the Timer1 oscillator output and Timer1 external clock input.
12 RC1/T1OSI/CCP2 bidirectional PORTC bit 1 Schmitt Trigger digital I/O, shared with the Timer1 oscillator input and Capture2 input/Compare2 output/PWM2 output.
13 RC2/CCP1 bidirectional PORTC bit 2 Schmitt Trigger digital I/O, shared with Capture1 input/Compare1 output/PWM1 output.
14 RC3/SCK/SCL bidirectional PORTC bit 3 Schmitt Trigger digital I/O, shared with the synchronous serial clock for SPI mode and I2C mode.
15 RC4/SDI/SDA bidirectional PORTC bit 4 Schmitt Trigger digital I/O, shared with the SPI data input and I2C data I/O.
16 RC5/SDO bidirectional PORTC bit 5 Schmitt Trigger digital I/O, shared with the SPI data output.
17 RC6/TX/CK bidirectional PORTC bit 6 Schmitt Trigger digital I/O, shared with USART asynchronous transmit and USART synchronous clock.
18 RC7/RX/DT bidirectional PORTC bit 7 Schmitt Trigger digital I/O, shared with USART asynchronous receive and USART synchronous data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional PORTB bit 0 digital I/O with software-programmable weak pull-up, TTL input (Schmitt Trigger when used as external interrupt INT).
22 RB1 bidirectional PORTB bit 1 digital I/O with TTL input and software-programmable weak pull-up.
23 RB2 bidirectional PORTB bit 2 digital I/O with TTL input and software-programmable weak pull-up.
24 RB3/PGM bidirectional PORTB bit 3 digital I/O with TTL input and weak pull-up option, also the low voltage ICSP programming enable pin.
25 RB4 bidirectional PORTB bit 4 digital I/O with TTL input and software-programmable weak pull-up.
26 RB5 bidirectional PORTB bit 5 digital I/O with TTL input and software-programmable weak pull-up.
27 RB6/PGC bidirectional PORTB bit 6 digital I/O with weak pull-up option, also the In-Circuit Debugger and ICSP programming clock (Schmitt Trigger in Serial Programming mode).
28 RB7/PGD bidirectional PORTB bit 7 digital I/O with weak pull-up option, also the In-Circuit Debugger and ICSP programming data (Schmitt Trigger in Serial Programming mode).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -55 125 °C 121
Storage temperature -65 150 °C 121
Voltage on VDD with respect to VSS VDD -0.3 6.5 V 121
Voltage on MCLR with respect to VSS 0 13.5 V Note 2 121
Voltage on RA4 with respect to VSS 0 12 V 121
Total power dissipation 1 W Note 1 121
Input clamp current IIK -20 20 mA VI < 0 or VI > VDD 121
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 121
Supply Voltage PIC16F7X VDD 4 5.5 V All configurations (D001) 123
RAM Data Retention Voltage VDR 1.5 V Note 1 (D002) 123
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See section on Power-on Reset for details (D004) 123
Brown-out Reset Voltage VBOR 3.65 4 4.35 V BODEN bit in configuration word enabled (D005) 123
Supply Current PIC16F7X, XT/RC IDD 0.9 4 mA XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) (D010) 124
Supply Current PIC16F7X, HS IDD 5.2 15 mA HS osc configuration FOSC = 20 MHz, VDD = 5.5V (D013) 124
Brown-out Reset Current ∆IBOR 25 200 µA BOR enabled, VDD = 5.0V (D015) 124
Power-down Current, WDT enabled, industrial IPD 5 42 µA VDD = 4.0V, WDT enabled, -40°C to +85°C (D020) 124
Power-down Current, WDT disabled, industrial IPD 0.1 19 µA VDD = 4.0V, WDT disabled, -40°C to +85°C (D021) 124
Power-down Current, WDT enabled, extended IPD 10.5 57 µA VDD = 4.0V, WDT enabled, -40°C to +125°C (D021A) 124
Power-down Current, WDT disabled, extended IPD 1.5 42 µA VDD = 4.0V, WDT disabled, -40°C to +125°C 124
Input Low Voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V (D030A) 125
Input Low Voltage, OSC1 (XT and LP mode) VIL 0.3 V (D033) 125
Input High Voltage, I/O ports with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V (D040) 125
Input High Voltage, OSC1 (XT and LP mode) VIH 1.6 V (D042A) 125
PORTB Weak Pull-up Current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS (D070) 125
Input Leakage Current, I/O ports IIL -1 1 µA Vss ≤ VPIN ≤ VDD, pin at hi-impedance (D060) 125
Input Leakage Current, MCLR, RA4/T0CKI IIL -5 5 µA Vss ≤ VPIN ≤ VDD (D061) 125
Input Leakage Current, OSC1 IIL -5 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration (D063) 125
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C (D080) 126
Output Low Voltage, OSC2/CLKOUT (RC osc config) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40°C to +125°C (D083) 126
Open Drain High Voltage VOD 12 V RA4 pin (D150) 126
Capacitive loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 (D100) 126
Capacitive loading, all I/O pins and OSC2 (RC mode) CIO 50 pF (D101) 126
Capacitive loading, SCL, SDA in I2C mode CB 400 pF (D102) 126
Program FLASH Endurance EP 100 1000 E/W 25°C at 5V (D130) 126
VDD for Read VPR 2 5.5 V (D131) 126
A/D Resolution NR 8 bits VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF (A01) 140
A/D Reference voltage VREF 2.5 5.5 V -40°C to +125°C (A20) 140
Recommended impedance of analog voltage source ZAIN 10 kΩ (A30) 140
A/D conversion current (VDD) PIC16F7X IAD 180 µA Average current consumption when A/D is on (Note 1) (A40) 140
VREF input current IREF 500 µA During A/D Conversion cycle (A50) 140
A/D clock period PIC16F7X, TOSC based TAD 1.6 µs TOSC based, VREF ≥ 3.0V (130) 141
A/D clock period PIC16F7X, RC mode TAD 2 4 6 µs A/D RC mode (130) 141
A/D acquisition time TACQ 5 µs (132) 141
External CLKIN Frequency, HS osc mode FOSC 0 20 MHz HS osc mode (DC to 20 MHz) 128
External CLKIN Frequency, XT osc mode FOSC 0 1 MHz XT osc mode (DC to 1 MHz) 128
Instruction Cycle Time TCY 200 ns TCY = 4/FOSC 128
Operating temperature, industrial TA -40 85 °C Industrial 123

CAD (KiCad official)

  • Symbol: PIC16F73T-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16f73t-i-etched.step / pic16f73t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f73t-i.step / pic16f73t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (174 pp, sha256 81a107b5141fded6, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F73T-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F73T-I/SO