main
Ray Publish 0.1.1 510cd71

PIC16C73B-20

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC16C73B-20 from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Master clear (RESET) input, active low, or programming voltage input.
2 RA0/AN0 bidirectional PORTA bit 0 bi-directional I/O with TTL input, also analog input 0 (A/D not available on PIC16C63A).
3 RA1/AN1 bidirectional PORTA bit 1 bi-directional I/O with TTL input, also analog input 1 (A/D not available on PIC16C63A).
4 RA2/AN2 bidirectional PORTA bit 2 bi-directional I/O with TTL input, also analog input 2 (A/D not available on PIC16C63A).
5 RA3/AN3/VREF bidirectional PORTA bit 3 bi-directional I/O with TTL input, also analog input 3 or analog reference voltage (A/D not available on PIC16C63A).
6 RA4/T0CKI bidirectional PORTA bit 4 bi-directional I/O with Schmitt Trigger input, also the clock input to Timer0; output is open drain type.
7 RA5/SS/AN4 bidirectional PORTA bit 5 bi-directional I/O with TTL input, also analog input 4 or the slave select for the synchronous serial port (A/D not available on PIC16C63A).
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKIN input Oscillator crystal input or external clock source input (Schmitt Trigger when in RC oscillator mode, CMOS input otherwise).
10 OSC2/CLKOUT output Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency denoting the instruction cycle rate.
11 RC0/T1OSO/T1CKI bidirectional PORTC bit 0 bi-directional I/O with Schmitt Trigger input, also the Timer1 oscillator output or Timer1 clock input.
12 RC1/T1OSI/CCP2 bidirectional PORTC bit 1 bi-directional I/O with Schmitt Trigger input, also the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output.
13 RC2/CCP1 bidirectional PORTC bit 2 bi-directional I/O with Schmitt Trigger input, also the Capture1 input/Compare1 output/PWM1 output.
14 RC3/SCK/SCL bidirectional PORTC bit 3 bi-directional I/O with Schmitt Trigger input, also the synchronous serial clock input/output for both SPI and I2C modes.
15 RC4/SDI/SDA bidirectional PORTC bit 4 bi-directional I/O with Schmitt Trigger input, also the SPI Data In (SPI mode) or data I/O (I2C mode).
16 RC5/SDO bidirectional PORTC bit 5 bi-directional I/O with Schmitt Trigger input, also the SPI Data Out (SPI mode).
17 RC6/TX/CK bidirectional PORTC bit 6 bi-directional I/O with Schmitt Trigger input, also the USART asynchronous transmit or synchronous clock.
18 RC7/RX/DT bidirectional PORTC bit 7 bi-directional I/O with Schmitt Trigger input, also the USART asynchronous receive or synchronous data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional PORTB bit 0 bi-directional I/O with TTL/Schmitt Trigger input when used as external interrupt, also the external interrupt pin.
22 RB1 bidirectional PORTB bit 1 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs.
23 RB2 bidirectional PORTB bit 2 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs.
24 RB3 bidirectional PORTB bit 3 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs.
25 RB4 bidirectional PORTB bit 4 bi-directional I/O with TTL input and interrupt-on-change.
26 RB5 bidirectional PORTB bit 5 bi-directional I/O with TTL input and interrupt-on-change.
27 RB6 bidirectional PORTB bit 6 bi-directional I/O with TTL/Schmitt Trigger input (Schmitt Trigger in serial programming mode), interrupt-on-change, and serial programming clock.
28 RB7 bidirectional PORTB bit 7 bi-directional I/O with TTL/Schmitt Trigger input (Schmitt Trigger in serial programming mode), interrupt-on-change, and serial programming data.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -55 125 °C 113
Storage temperature -65 150 °C 113
Voltage on any pin with respect to VSS (except VDD, MCLR and RA4) -0.3 V 113
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 113
Voltage on MCLR with respect to VSS 0 13.25 V Note 2 113
Voltage on RA4 with respect to VSS 0 8.5 V 113
Total power dissipation 1 W Note 1 113
Input clamp current IIK -20 20 mA VI < 0 or VI > VDD 113
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 113
Supply voltage (XT, RC and LP oscillator modes) VDD 4 5.5 V XT, RC and LP osc mode 116
Supply voltage (HS oscillator mode) VDD 4.5 5.5 V HS osc mode 116
Supply voltage (BOR enabled) VDD 5.5 V BOR enabled (Note 7) 116
Operating temperature (extended) TA -40 125 °C for extended (‡ PIC16C6A/65B/73B/74B-20 Standard Operating Conditions) 116
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/mS PWRT enabled (PWRTE bit clear) 116
Brown-out Reset voltage trip point VBOR 3.65 4.35 V BODEN bit set 116
Supply current (XT, RC oscillator modes) IDD 2.7 5 mA XT, RC osc modes: FOSC = 4 MHz, VDD = 5.5 V (Note 4) 117
Supply current (HS oscillator mode) IDD 7 10 mA HS osc mode: FOSC = 20 MHz, VDD = 5.5 V 117
Power-down current, WDT enabled, -40°C to +85°C IPD 10.5 42 µA VDD = 4.0V, WDT enabled, -40°C to +85°C 117
Power-down current, WDT disabled, 0°C to +70°C IPD 1.5 16 µA VDD = 4.0V, WDT disabled, 0°C to +70°C 117
Power-down current, WDT disabled, -40°C to +85°C IPD 1.5 19 µA VDD = 4.0V, WDT disabled, -40°C to +85°C 117
Power-down current, WDT disabled, -40°C to +125°C IPD 2.5 19 µA VDD = 4.0V, WDT disabled, -40°C to +125°C 117
Watchdog Timer module differential current IWDT 6 20 µA WDTE bit set, VDD = 4.0V 118
Brown-out Reset module differential current IBOR 100 150 µA BODEN bit set, VDD = 5.0 118
Input low voltage, I/O ports with TTL buffer (4.5 V to 5.5 V) VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 118
Input high voltage, I/O ports with TTL buffer VIH 2 V 4.5 V ≤ VDD ≤ 5.5V 119
Input leakage current, I/O ports IIL -1 1 µA VSS ≤ VPIN ≤ VDD, pin at hi-impedance 119
Input leakage current, MCLR, RA4/T0CKI IIL -5 5 µA VSS ≤ VPIN ≤ VDD 119
Input leakage current, OSC1 IIL -5 5 µA VSS ≤ VPIN ≤ VDD, XT, HS and LP osc modes 119
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS 119
Output low voltage, I/O ports (-40°C to +85°C) VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C 120
Output low voltage, I/O ports (-40°C to +125°C) VOL 0.6 V IOL = 7.0 mA, VDD = 4.5V, -40°C to +125°C 120
Output low voltage, OSC2/CLKOUT (RC mode, -40°C to +85°C) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C 120
Output low voltage, OSC2/CLKOUT (RC mode, -40°C to +125°C) VOL 0.6 V IOL = 1.2 mA, VDD = 4.5V, -40°C to +125°C 120
Open-drain high voltage, RA4 pin VOD 8.5 V RA4 pin 120
Capacitive loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 121
Capacitive loading, all I/O pins and OSC2 (RC mode) CIO 50 pF 121
Capacitive loading, SCL, SDA Cb 400 pF in I2C mode 121
External CLKIN frequency (HS oscillator, -20) FOSC 20 MHz HS osc mode (-20) 124
External CLKIN period (HS oscillator, -20) TOSC 50 ns HS osc mode (-20) 124
Instruction cycle time TCY 200 ns TCY = 4/FOSC 124
External clock in (OSC1) high or low time TosL, TosH 15 ns HS oscillator 124
External clock in (OSC1) rise or fall time TosR, TosF 15 ns HS oscillator 124
OSC1 to CLKOUT (falling) TosH2ckL 75 200 ns Note 1 125
OSC1 to CLKOUT (rising) TosH2ckH 75 200 ns Note 1 125
CLKOUT rise time TckR 35 100 ns Note 1 125
CLKOUT fall time TckF 35 100 ns Note 1 125
OSC1 (Q1 cycle) to port output valid TosH2ioV 50 150 ns 125
OSC1 (Q2 cycle) to port input invalid (I/O in hold time) TosH2ioI 100 ns PIC16CXX 125
Port output rise time TioR 10 40 ns PIC16CXX 125
Port output fall time TioF 10 40 ns PIC16CXX 125
A/D reference voltage VREF 2.5 V 137
Recommended impedance of analog voltage source ZAIN 10 kΩ 137

CAD (KiCad official)

  • Symbol: PIC16C73B-20
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16c73b-20-so-etched.step / pic16c73b-20-so-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16c73b-20-so.step / pic16c73b-20-so.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (186 pp, sha256 35c8a32ee8686aa6, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF