← Commit history
README.md+65−63
@@ -2,40 +2,40 @@  **Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil -PIC16C73B-20 from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+PIC16C73B-20 from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | MCLR/VPP | input | Master clear (RESET) input or programming voltage input, active low to reset the device. |-| 2 | RA0/AN0 | bidirectional | PORTA bidirectional I/O with TTL input buffer; RA0 can also be analog input 0. |-| 3 | RA1/AN1 | bidirectional | PORTA bidirectional I/O with TTL input buffer; RA1 can also be analog input 1. |-| 4 | RA2/AN2 | bidirectional | PORTA bidirectional I/O with TTL input buffer; RA2 can also be analog input 2. |-| 5 | RA3/AN3/VREF | bidirectional | PORTA bidirectional I/O with TTL input buffer; RA3 can also be analog input 3 or the analog reference voltage. |-| 6 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O with Schmitt Trigger input buffer; RA4 can also be the Timer0 clock input, and its output is open drain. |-| 7 | RA5/SS/AN4 | bidirectional | PORTA bidirectional I/O with TTL input buffer; RA5 can also be analog input 4 or the slave select for the synchronous serial port. |+| 1 | MCLR/VPP | input | Master clear (RESET) input, active low, or programming voltage input. |+| 2 | RA0/AN0 | bidirectional | PORTA bit 0 bi-directional I/O with TTL input, also analog input 0 (A/D not available on PIC16C63A). |+| 3 | RA1/AN1 | bidirectional | PORTA bit 1 bi-directional I/O with TTL input, also analog input 1 (A/D not available on PIC16C63A). |+| 4 | RA2/AN2 | bidirectional | PORTA bit 2 bi-directional I/O with TTL input, also analog input 2 (A/D not available on PIC16C63A). |+| 5 | RA3/AN3/VREF | bidirectional | PORTA bit 3 bi-directional I/O with TTL input, also analog input 3 or analog reference voltage (A/D not available on PIC16C63A). |+| 6 | RA4/T0CKI | bidirectional | PORTA bit 4 bi-directional I/O with Schmitt Trigger input, also the clock input to Timer0; output is open drain type. |+| 7 | RA5/SS/AN4 | bidirectional | PORTA bit 5 bi-directional I/O with TTL input, also analog input 4 or the slave select for the synchronous serial port (A/D not available on PIC16C63A). | | 8 | VSS | power_in | Ground reference for logic and I/O pins. |-| 9 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input; Schmitt Trigger input in RC oscillator mode and CMOS input otherwise. |-| 10 | OSC2/CLKOUT | output | Oscillator crystal output for crystal or resonator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |-| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; RC0 can also be the Timer1 oscillator output or Timer1 clock input. |-| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; RC1 can also be the Timer1 oscillator input or the Capture2 input, Compare2 output or PWM2 output. |-| 13 | RC2/CCP1 | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; RC2 can also be the Capture1 input, Compare1 output or PWM1 output. |-| 14 | RC3/SCK/SCL | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; RC3 can also be the synchronous serial clock input/output for both SPI and I2C modes. |-| 15 | RC4/SDI/SDA | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; RC4 can also be the SPI Data In (SPI mode) or data I/O (I2C mode). |-| 16 | RC5/SDO | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; RC5 can also be the SPI Data Out (SPI mode). |-| 17 | RC6/TX/CK | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; RC6 can also be the USART asynchronous transmit or synchronous clock. |-| 18 | RC7/RX/DT | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; RC7 can also be the USART asynchronous receive or synchronous data. |+| 9 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input (Schmitt Trigger when in RC oscillator mode, CMOS input otherwise). |+| 10 | OSC2/CLKOUT | output | Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency denoting the instruction cycle rate. |+| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bit 0 bi-directional I/O with Schmitt Trigger input, also the Timer1 oscillator output or Timer1 clock input. |+| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC bit 1 bi-directional I/O with Schmitt Trigger input, also the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output. |+| 13 | RC2/CCP1 | bidirectional | PORTC bit 2 bi-directional I/O with Schmitt Trigger input, also the Capture1 input/Compare1 output/PWM1 output. |+| 14 | RC3/SCK/SCL | bidirectional | PORTC bit 3 bi-directional I/O with Schmitt Trigger input, also the synchronous serial clock input/output for both SPI and I2C modes. |+| 15 | RC4/SDI/SDA | bidirectional | PORTC bit 4 bi-directional I/O with Schmitt Trigger input, also the SPI Data In (SPI mode) or data I/O (I2C mode). |+| 16 | RC5/SDO | bidirectional | PORTC bit 5 bi-directional I/O with Schmitt Trigger input, also the SPI Data Out (SPI mode). |+| 17 | RC6/TX/CK | bidirectional | PORTC bit 6 bi-directional I/O with Schmitt Trigger input, also the USART asynchronous transmit or synchronous clock. |+| 18 | RC7/RX/DT | bidirectional | PORTC bit 7 bi-directional I/O with Schmitt Trigger input, also the USART asynchronous receive or synchronous data. | | 19 | VSS | power_in | Ground reference for logic and I/O pins. | | 20 | VDD | power_in | Positive supply for logic and I/O pins. |-| 21 | RB0/INT | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input; RB0 can also be the external interrupt pin, where the buffer is Schmitt Trigger. |-| 22 | RB1 | bidirectional | PORTB bidirectional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-ups. |-| 23 | RB2 | bidirectional | PORTB bidirectional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-ups. |-| 24 | RB3 | bidirectional | PORTB bidirectional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-ups. |-| 25 | RB4 | bidirectional | PORTB bidirectional I/O with TTL input buffer; interrupt-on-change pin with software-programmable weak pull-up. |-| 26 | RB5 | bidirectional | PORTB bidirectional I/O with TTL input buffer; interrupt-on-change pin with software-programmable weak pull-up. |-| 27 | RB6 | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin and serial programming clock (Schmitt Trigger in serial programming mode). |-| 28 | RB7 | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin and serial programming data (Schmitt Trigger in serial programming mode). |+| 21 | RB0/INT | bidirectional | PORTB bit 0 bi-directional I/O with TTL/Schmitt Trigger input when used as external interrupt, also the external interrupt pin. |+| 22 | RB1 | bidirectional | PORTB bit 1 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs. |+| 23 | RB2 | bidirectional | PORTB bit 2 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs. |+| 24 | RB3 | bidirectional | PORTB bit 3 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs. |+| 25 | RB4 | bidirectional | PORTB bit 4 bi-directional I/O with TTL input and interrupt-on-change. |+| 26 | RB5 | bidirectional | PORTB bit 5 bi-directional I/O with TTL input and interrupt-on-change. |+| 27 | RB6 | bidirectional | PORTB bit 6 bi-directional I/O with TTL/Schmitt Trigger input (Schmitt Trigger in serial programming mode), interrupt-on-change, and serial programming clock. |+| 28 | RB7 | bidirectional | PORTB bit 7 bi-directional I/O with TTL/Schmitt Trigger input (Schmitt Trigger in serial programming mode), interrupt-on-change, and serial programming data. |  ## Key specifications @@ -54,54 +54,56 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries |---|---|---|---|---|---|---|---| | Ambient temperature under bias |  | -55 |  | 125 | °C |  | 113 | | Storage temperature |  | -65 |  | 150 | °C |  | 113 |+| Voltage on any pin with respect to VSS (except VDD, MCLR and RA4) |  | -0.3 |  |  | V |  | 113 | | Voltage on VDD with respect to VSS | VDD | -0.3 |  | 7.5 | V |  | 113 |-| Voltage on any pin with respect to VSS |  | -0.3 |  |  | V | Except VDD, MCLR and RA4; upper limit printed as (VDD + 0.3V) | 113 | | Voltage on MCLR with respect to VSS |  | 0 |  | 13.25 | V | Note 2 | 113 | | Voltage on RA4 with respect to VSS |  | 0 |  | 8.5 | V |  | 113 | | Total power dissipation |  |  |  | 1 | W | Note 1 | 113 | | Input clamp current | IIK | -20 |  | 20 | mA | VI < 0 or VI > VDD | 113 | | Output clamp current | IOK | -20 |  | 20 | mA | VO < 0 or VO > VDD | 113 |-| Operating temperature, commercial | TA | 0 |  | 70 | °C | Commercial | 116 |-| Operating temperature, industrial | TA | -40 |  | 85 | °C | Industrial | 116 |-| Operating temperature, extended | TA | -40 |  | 125 | °C | Extended | 116 |-| Supply voltage VDD | VDD | 4 |  | 5.5 | V | XT, RC and LP osc mode | 116 |-| Supply voltage VDD | VDD | 4.5 |  | 5.5 | V | HS osc mode | 116 |+| Supply voltage (XT, RC and LP oscillator modes) | VDD | 4 |  | 5.5 | V | XT, RC and LP osc mode | 116 |+| Supply voltage (HS oscillator mode) | VDD | 4.5 |  | 5.5 | V | HS osc mode | 116 |+| Supply voltage (BOR enabled) | VDD |  |  | 5.5 | V | BOR enabled (Note 7) | 116 |+| Operating temperature (extended) | TA | -40 |  | 125 | °C | for extended (‡ PIC16C6A/65B/73B/74B-20 Standard Operating Conditions) | 116 | | VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 |  |  | V/mS | PWRT enabled (PWRTE bit clear) | 116 | | Brown-out Reset voltage trip point | VBOR | 3.65 |  | 4.35 | V | BODEN bit set | 116 |-| Supply current, XT/RC | IDD |  | 2.7 | 5 | mA | XT, RC osc modes: FOSC = 4 MHz, VDD = 5.5 V (Note 4) | 117 |-| Supply current, HS | IDD |  | 7 | 10 | mA | HS osc mode: FOSC = 20 MHz, VDD = 5.5 V | 117 |-| Power-down current, WDT enabled | IPD |  | 10.5 | 42 | A | VDD = 4.0V, WDT enabled, -40°C to +85°C | 117 |-| Power-down current, WDT disabled | IPD |  | 1.5 | 16 | A | VDD = 4.0V, WDT disabled, 0°C to +70°C | 117 |-| Power-down current, WDT disabled | IPD |  | 1.5 | 19 | A | VDD = 4.0V, WDT disabled, -40°C to +85°C | 117 |-| Power-down current, WDT disabled | IPD |  | 2.5 | 19 | A | VDD = 4.0V, WDT disabled, -40°C to +125°C | 117 |-| Watchdog Timer module differential current | IWDT |  | 6 | 20 | A | WDTE bit set, VDD = 4.0V | 118 |-| Brown-out Reset module differential current | IBOR |  | 100 | 150 | A | BODEN bit set, VDD = 5.0 | 118 |-| Input low voltage, I/O ports with TTL buffer | VIL |  |  | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 118 |+| Supply current (XT, RC oscillator modes) | IDD |  | 2.7 | 5 | mA | XT, RC osc modes: FOSC = 4 MHz, VDD = 5.5 V (Note 4) | 117 |+| Supply current (HS oscillator mode) | IDD |  | 7 | 10 | mA | HS osc mode: FOSC = 20 MHz, VDD = 5.5 V | 117 |+| Power-down current, WDT enabled, -40°C to +85°C | IPD |  | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40°C to +85°C | 117 |+| Power-down current, WDT disabled, 0°C to +70°C | IPD |  | 1.5 | 16 | µA | VDD = 4.0V, WDT disabled, 0°C to +70°C | 117 |+| Power-down current, WDT disabled, -40°C to +85°C | IPD |  | 1.5 | 19 | µA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 117 |+| Power-down current, WDT disabled, -40°C to +125°C | IPD |  | 2.5 | 19 | µA | VDD = 4.0V, WDT disabled, -40°C to +125°C | 117 |+| Watchdog Timer module differential current | IWDT |  | 6 | 20 | µA | WDTE bit set, VDD = 4.0V | 118 |+| Brown-out Reset module differential current | IBOR |  | 100 | 150 | µA | BODEN bit set, VDD = 5.0 | 118 |+| Input low voltage, I/O ports with TTL buffer (4.5 V to 5.5 V) | VIL |  |  | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 118 | | Input high voltage, I/O ports with TTL buffer | VIH | 2 |  |  | V | 4.5 V ≤ VDD ≤ 5.5V | 119 |-| Input leakage current, I/O ports | IIL | -1 |  | 1 | A | VSS ≤ VPIN ≤ VDD, pin at hi-impedance | 119 |-| Input leakage current, MCLR, RA4/T0CKI | IIL | -5 |  | 5 | A | VSS ≤ VPIN ≤ VDD | 119 |-| Input leakage current, OSC1 | IIL | -5 |  | 5 | A | VSS ≤ VPIN ≤ VDD, XT, HS and LP osc modes | 119 |-| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | A | VDD = 5V, VPIN = VSS | 119 |-| Output low voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 120 |-| Output low voltage, OSC2/CLKOUT (RC osc mode) | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 120 |-| Open-drain high voltage | VOD |  |  | 8.5 | V | RA4 pin | 120 |-| OSC2 pin capacitive loading | COSC2 |  |  | 15 | pF | XT, HS and LP modes when external clock is used to drive OSC1 | 121 |-| All I/O pins and OSC2 (RC mode) capacitive loading | CIO |  |  | 50 | pF |  | 121 |-| SCL, SDA capacitive loading (I2C mode) | Cb |  |  | 400 | pF | SCL, SDA (in I2C mode) | 121 |-| Oscillator frequency | FOSC | 4 |  | 20 | MHz | HS osc mode (-20) | 124 |-| Oscillator period | TOSC | 50 |  | 250 | ns | HS osc mode (-20) | 124 |-| OSC1 (Q1 cycle) to port out valid | TosH2ioV |  | 50 | 150 | ns |  | 125 |+| Input leakage current, I/O ports | IIL | -1 |  | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at hi-impedance | 119 |+| Input leakage current, MCLR, RA4/T0CKI | IIL | -5 |  | 5 | µA | VSS ≤ VPIN ≤ VDD | 119 |+| Input leakage current, OSC1 | IIL | -5 |  | 5 | µA | VSS ≤ VPIN ≤ VDD, XT, HS and LP osc modes | 119 |+| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 119 |+| Output low voltage, I/O ports (-40°C to +85°C) | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 120 |+| Output low voltage, I/O ports (-40°C to +125°C) | VOL |  |  | 0.6 | V | IOL = 7.0 mA, VDD = 4.5V, -40°C to +125°C | 120 |+| Output low voltage, OSC2/CLKOUT (RC mode, -40°C to +85°C) | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 120 |+| Output low voltage, OSC2/CLKOUT (RC mode, -40°C to +125°C) | VOL |  |  | 0.6 | V | IOL = 1.2 mA, VDD = 4.5V, -40°C to +125°C | 120 |+| Open-drain high voltage, RA4 pin | VOD |  |  | 8.5 | V | RA4 pin | 120 |+| Capacitive loading, OSC2 pin | COSC2 |  |  | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 121 |+| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO |  |  | 50 | pF |  | 121 |+| Capacitive loading, SCL, SDA | Cb |  |  | 400 | pF | in I2C mode | 121 |+| External CLKIN frequency (HS oscillator, -20) | FOSC |  |  | 20 | MHz | HS osc mode (-20) | 124 |+| External CLKIN period (HS oscillator, -20) | TOSC | 50 |  |  | ns | HS osc mode (-20) | 124 |+| Instruction cycle time | TCY | 200 |  |  | ns | TCY = 4/FOSC | 124 |+| External clock in (OSC1) high or low time | TosL, TosH | 15 |  |  | ns | HS oscillator | 124 |+| External clock in (OSC1) rise or fall time | TosR, TosF |  |  | 15 | ns | HS oscillator | 124 |+| OSC1 to CLKOUT (falling) | TosH2ckL |  | 75 | 200 | ns | Note 1 | 125 |+| OSC1 to CLKOUT (rising) | TosH2ckH |  | 75 | 200 | ns | Note 1 | 125 |+| CLKOUT rise time | TckR |  | 35 | 100 | ns | Note 1 | 125 |+| CLKOUT fall time | TckF |  | 35 | 100 | ns | Note 1 | 125 |+| OSC1 (Q1 cycle) to port output valid | TosH2ioV |  | 50 | 150 | ns |  | 125 | | OSC1 (Q2 cycle) to port input invalid (I/O in hold time) | TosH2ioI | 100 |  |  | ns | PIC16CXX | 125 | | Port output rise time | TioR |  | 10 | 40 | ns | PIC16CXX | 125 | | Port output fall time | TioF |  | 10 | 40 | ns | PIC16CXX | 125 |-| Clock high to data out valid (sync transmit) | TckH2dtV |  |  | 80 | ns | PIC16CXX | 136 |-| Data setup before CK (DT setup time) | TdtV2ckL | 15 |  |  | ns |  | 136 |-| Data hold after CK (DT hold time) | TckL2dtl | 15 |  |  | ns |  | 136 |-| Absolute total error | EABS | -1 |  | 1 | LSb | VREF = VDD = 5.12 V, Vss ≤ VAIN ≤ VREF | 137 |-| Recommended impedance of analog voltage source | ZAIN |  |  | 10 | k |  | 137 |-| Reference voltage | VREF | 2.5 |  |  | V |  | 137 |-| Conversion time (not including S/H time) | TCNV | 11 |  | 11 | TAD |  | 138 |-| Acquisition time | TACQ | 5 |  |  | s | Amplifier settling time minimum | 138 |+| A/D reference voltage | VREF | 2.5 |  |  | V |  | 137 |+| Recommended impedance of analog voltage source | ZAIN |  |  | 10 | kΩ |  | 137 |  ## CAD (KiCad official) @@ -114,7 +116,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](docs/pic16c73b-20-so-datasheet.pdf) (186 pp, sha256 `35c8a32ee8686aa6`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](docs/pic16c73b-20-so-datasheet.pdf) (186 pp, sha256 `35c8a32ee8686aa6`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+37−39
@@ -1,6 +1,6 @@ {   "slug": "pic16c73b-20-so",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic16c73b-20-so-hero.glb",-    "pic16c73b-20-so-hero.overlay.json",-    "pic16c73b-20-so-etched.glb"+    "pic16c73b-20-so-hero.overlay.json"   ],   "component": {     "mpn": "PIC16C73B-20/SO",@@ -43,7 +42,7 @@       "symbol": "pic16c73b-20-so.kicad_sym",       "footprint": "pic16c73b-20-so.kicad_mod",       "model_3d": "pic16c73b-20-so-hero.glb",-      "model_3d_plain": "pic16c73b-20-so-etched.glb",+      "model_3d_plain": "pic16c73b-20-so.glb",       "model_3d_step": "pic16c73b-20-so-etched.step",       "model_3d_step_plain": "pic16c73b-20-so.step",       "lbr": "pic16c73b-20-so.lbr"@@ -54,12 +53,11 @@       "mouser": "579-PIC16C73B20SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T05:01:04Z",+      "checked_at": "2026-11-17T18:07:49Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16C73B-20/SO-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "579-PIC16C73B20SO",@@ -72,43 +70,43 @@         "number": "1",         "name": "MCLR/VPP",         "type": "input",-        "description": "Master clear (RESET) input or programming voltage input, active low to reset the device."+        "description": "Master clear (RESET) input, active low, or programming voltage input."       },       {         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with TTL input buffer; RA0 can also be analog input 0."+        "description": "PORTA bit 0 bi-directional I/O with TTL input, also analog input 0 (A/D not available on PIC16C63A)."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with TTL input buffer; RA1 can also be analog input 1."+        "description": "PORTA bit 1 bi-directional I/O with TTL input, also analog input 1 (A/D not available on PIC16C63A)."       },       {         "number": "4",         "name": "RA2/AN2",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with TTL input buffer; RA2 can also be analog input 2."+        "description": "PORTA bit 2 bi-directional I/O with TTL input, also analog input 2 (A/D not available on PIC16C63A)."       },       {         "number": "5",         "name": "RA3/AN3/VREF",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with TTL input buffer; RA3 can also be analog input 3 or the analog reference voltage."+        "description": "PORTA bit 3 bi-directional I/O with TTL input, also analog input 3 or analog reference voltage (A/D not available on PIC16C63A)."       },       {         "number": "6",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with Schmitt Trigger input buffer; RA4 can also be the Timer0 clock input, and its output is open drain."+        "description": "PORTA bit 4 bi-directional I/O with Schmitt Trigger input, also the clock input to Timer0; output is open drain type."       },       {         "number": "7",         "name": "RA5/SS/AN4",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with TTL input buffer; RA5 can also be analog input 4 or the slave select for the synchronous serial port."+        "description": "PORTA bit 5 bi-directional I/O with TTL input, also analog input 4 or the slave select for the synchronous serial port (A/D not available on PIC16C63A)."       },       {         "number": "8",@@ -120,61 +118,61 @@         "number": "9",         "name": "OSC1/CLKIN",         "type": "input",-        "description": "Oscillator crystal input or external clock source input; Schmitt Trigger input in RC oscillator mode and CMOS input otherwise."+        "description": "Oscillator crystal input or external clock source input (Schmitt Trigger when in RC oscillator mode, CMOS input otherwise)."       },       {         "number": "10",         "name": "OSC2/CLKOUT",         "type": "output",-        "description": "Oscillator crystal output for crystal or resonator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency denoting the instruction cycle rate."       },       {         "number": "11",         "name": "RC0/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC0 can also be the Timer1 oscillator output or Timer1 clock input."+        "description": "PORTC bit 0 bi-directional I/O with Schmitt Trigger input, also the Timer1 oscillator output or Timer1 clock input."       },       {         "number": "12",         "name": "RC1/T1OSI/CCP2",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC1 can also be the Timer1 oscillator input or the Capture2 input, Compare2 output or PWM2 output."+        "description": "PORTC bit 1 bi-directional I/O with Schmitt Trigger input, also the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC2 can also be the Capture1 input, Compare1 output or PWM1 output."+        "description": "PORTC bit 2 bi-directional I/O with Schmitt Trigger input, also the Capture1 input/Compare1 output/PWM1 output."       },       {         "number": "14",         "name": "RC3/SCK/SCL",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC3 can also be the synchronous serial clock input/output for both SPI and I2C modes."+        "description": "PORTC bit 3 bi-directional I/O with Schmitt Trigger input, also the synchronous serial clock input/output for both SPI and I2C modes."       },       {         "number": "15",         "name": "RC4/SDI/SDA",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC4 can also be the SPI Data In (SPI mode) or data I/O (I2C mode)."+        "description": "PORTC bit 4 bi-directional I/O with Schmitt Trigger input, also the SPI Data In (SPI mode) or data I/O (I2C mode)."       },       {         "number": "16",         "name": "RC5/SDO",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC5 can also be the SPI Data Out (SPI mode)."+        "description": "PORTC bit 5 bi-directional I/O with Schmitt Trigger input, also the SPI Data Out (SPI mode)."       },       {         "number": "17",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC6 can also be the USART asynchronous transmit or synchronous clock."+        "description": "PORTC bit 6 bi-directional I/O with Schmitt Trigger input, also the USART asynchronous transmit or synchronous clock."       },       {         "number": "18",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC7 can also be the USART asynchronous receive or synchronous data."+        "description": "PORTC bit 7 bi-directional I/O with Schmitt Trigger input, also the USART asynchronous receive or synchronous data."       },       {         "number": "19",@@ -192,49 +190,49 @@         "number": "21",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; RB0 can also be the external interrupt pin, where the buffer is Schmitt Trigger."+        "description": "PORTB bit 0 bi-directional I/O with TTL/Schmitt Trigger input when used as external interrupt, also the external interrupt pin."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-ups."+        "description": "PORTB bit 1 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-ups."+        "description": "PORTB bit 2 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs."       },       {         "number": "24",         "name": "RB3",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-ups."+        "description": "PORTB bit 3 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL input buffer; interrupt-on-change pin with software-programmable weak pull-up."+        "description": "PORTB bit 4 bi-directional I/O with TTL input and interrupt-on-change."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL input buffer; interrupt-on-change pin with software-programmable weak pull-up."+        "description": "PORTB bit 5 bi-directional I/O with TTL input and interrupt-on-change."       },       {         "number": "27",         "name": "RB6",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin and serial programming clock (Schmitt Trigger in serial programming mode)."+        "description": "PORTB bit 6 bi-directional I/O with TTL/Schmitt Trigger input (Schmitt Trigger in serial programming mode), interrupt-on-change, and serial programming clock."       },       {         "number": "28",         "name": "RB7",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin and serial programming data (Schmitt Trigger in serial programming mode)."+        "description": "PORTB bit 7 bi-directional I/O with TTL/Schmitt Trigger input (Schmitt Trigger in serial programming mode), interrupt-on-change, and serial programming data."       }     ],     "provenance": {@@ -248,11 +246,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The SOIC pin numbers come from the SOIC column of Table 3-1 (PIC16C63A/73B pinout, page 11). The SOI; The datasheet is a family datasheet covering PIC16C63A/65B/73B/74B. The PIC16C73B-20/SO marking exam; Pins 8 and 19 are both VSS and pin 20 is VDD, as listed in Table 3-1. The pin types are KiCad classe"+          "extractor flagged: The SOIC-28 package outline drawing with 300 mil dimensions is not in the supplied text; only the 28; Pin 1 MCLR/VPP is listed as I/P in the datasheet; mapped to KiCad 'input' because its primary functi; Pin 9 OSC1/CLKIN and pin 10 OSC2/CLKOUT are classed input/output from the table's I/O column; the da"         ],-        "pages_sent": 18,-        "cost_usd": 0.1219,-        "at": "2026-11-12T05:00:48"+        "pages_sent": 19,+        "cost_usd": 0.1282,+        "at": "2026-11-17T18:07:19"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/9172e2c35f8fada0823865c7d5ceabd3.pdf",@@ -289,7 +287,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -307,8 +305,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "0101556ad169063643b76bea3f8790acdec05ac7190ebbdb044330b68e12904d",-        "checked": "2026-11-12",+        "sha256": "361d2b6ef5d5eb6b916aee43c96ef072229d8f3e53bb068c9f2cd05ca1907763",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+40−40
@@ -4,7 +4,7 @@   "slug": "pic16c73b-20-so",   "title": "PIC16C73B-20/SO",   "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "pic16c73b-20-so.kicad_sym",       "footprint": "pic16c73b-20-so.kicad_mod",       "model_3d": "pic16c73b-20-so-hero.glb",-      "model_3d_plain": "pic16c73b-20-so-etched.glb",+      "model_3d_plain": "pic16c73b-20-so.glb",       "model_3d_step": "pic16c73b-20-so-etched.step",       "model_3d_step_plain": "pic16c73b-20-so.step",       "lbr": "pic16c73b-20-so.lbr"@@ -36,12 +36,11 @@       "mouser": "579-PIC16C73B20SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T05:01:04Z",+      "checked_at": "2026-11-17T18:07:49Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16C73B-20/SO-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "579-PIC16C73B20SO",@@ -54,43 +53,43 @@         "number": "1",         "name": "MCLR/VPP",         "type": "input",-        "description": "Master clear (RESET) input or programming voltage input, active low to reset the device."+        "description": "Master clear (RESET) input, active low, or programming voltage input."       },       {         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with TTL input buffer; RA0 can also be analog input 0."+        "description": "PORTA bit 0 bi-directional I/O with TTL input, also analog input 0 (A/D not available on PIC16C63A)."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with TTL input buffer; RA1 can also be analog input 1."+        "description": "PORTA bit 1 bi-directional I/O with TTL input, also analog input 1 (A/D not available on PIC16C63A)."       },       {         "number": "4",         "name": "RA2/AN2",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with TTL input buffer; RA2 can also be analog input 2."+        "description": "PORTA bit 2 bi-directional I/O with TTL input, also analog input 2 (A/D not available on PIC16C63A)."       },       {         "number": "5",         "name": "RA3/AN3/VREF",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with TTL input buffer; RA3 can also be analog input 3 or the analog reference voltage."+        "description": "PORTA bit 3 bi-directional I/O with TTL input, also analog input 3 or analog reference voltage (A/D not available on PIC16C63A)."       },       {         "number": "6",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with Schmitt Trigger input buffer; RA4 can also be the Timer0 clock input, and its output is open drain."+        "description": "PORTA bit 4 bi-directional I/O with Schmitt Trigger input, also the clock input to Timer0; output is open drain type."       },       {         "number": "7",         "name": "RA5/SS/AN4",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O with TTL input buffer; RA5 can also be analog input 4 or the slave select for the synchronous serial port."+        "description": "PORTA bit 5 bi-directional I/O with TTL input, also analog input 4 or the slave select for the synchronous serial port (A/D not available on PIC16C63A)."       },       {         "number": "8",@@ -102,61 +101,61 @@         "number": "9",         "name": "OSC1/CLKIN",         "type": "input",-        "description": "Oscillator crystal input or external clock source input; Schmitt Trigger input in RC oscillator mode and CMOS input otherwise."+        "description": "Oscillator crystal input or external clock source input (Schmitt Trigger when in RC oscillator mode, CMOS input otherwise)."       },       {         "number": "10",         "name": "OSC2/CLKOUT",         "type": "output",-        "description": "Oscillator crystal output for crystal or resonator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency denoting the instruction cycle rate."       },       {         "number": "11",         "name": "RC0/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC0 can also be the Timer1 oscillator output or Timer1 clock input."+        "description": "PORTC bit 0 bi-directional I/O with Schmitt Trigger input, also the Timer1 oscillator output or Timer1 clock input."       },       {         "number": "12",         "name": "RC1/T1OSI/CCP2",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC1 can also be the Timer1 oscillator input or the Capture2 input, Compare2 output or PWM2 output."+        "description": "PORTC bit 1 bi-directional I/O with Schmitt Trigger input, also the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC2 can also be the Capture1 input, Compare1 output or PWM1 output."+        "description": "PORTC bit 2 bi-directional I/O with Schmitt Trigger input, also the Capture1 input/Compare1 output/PWM1 output."       },       {         "number": "14",         "name": "RC3/SCK/SCL",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC3 can also be the synchronous serial clock input/output for both SPI and I2C modes."+        "description": "PORTC bit 3 bi-directional I/O with Schmitt Trigger input, also the synchronous serial clock input/output for both SPI and I2C modes."       },       {         "number": "15",         "name": "RC4/SDI/SDA",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC4 can also be the SPI Data In (SPI mode) or data I/O (I2C mode)."+        "description": "PORTC bit 4 bi-directional I/O with Schmitt Trigger input, also the SPI Data In (SPI mode) or data I/O (I2C mode)."       },       {         "number": "16",         "name": "RC5/SDO",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC5 can also be the SPI Data Out (SPI mode)."+        "description": "PORTC bit 5 bi-directional I/O with Schmitt Trigger input, also the SPI Data Out (SPI mode)."       },       {         "number": "17",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC6 can also be the USART asynchronous transmit or synchronous clock."+        "description": "PORTC bit 6 bi-directional I/O with Schmitt Trigger input, also the USART asynchronous transmit or synchronous clock."       },       {         "number": "18",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O with Schmitt Trigger input; RC7 can also be the USART asynchronous receive or synchronous data."+        "description": "PORTC bit 7 bi-directional I/O with Schmitt Trigger input, also the USART asynchronous receive or synchronous data."       },       {         "number": "19",@@ -174,49 +173,49 @@         "number": "21",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; RB0 can also be the external interrupt pin, where the buffer is Schmitt Trigger."+        "description": "PORTB bit 0 bi-directional I/O with TTL/Schmitt Trigger input when used as external interrupt, also the external interrupt pin."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-ups."+        "description": "PORTB bit 1 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-ups."+        "description": "PORTB bit 2 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs."       },       {         "number": "24",         "name": "RB3",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-ups."+        "description": "PORTB bit 3 bi-directional I/O with TTL input; PORTB supports software-programmed weak pull-ups on all inputs."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL input buffer; interrupt-on-change pin with software-programmable weak pull-up."+        "description": "PORTB bit 4 bi-directional I/O with TTL input and interrupt-on-change."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL input buffer; interrupt-on-change pin with software-programmable weak pull-up."+        "description": "PORTB bit 5 bi-directional I/O with TTL input and interrupt-on-change."       },       {         "number": "27",         "name": "RB6",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin and serial programming clock (Schmitt Trigger in serial programming mode)."+        "description": "PORTB bit 6 bi-directional I/O with TTL/Schmitt Trigger input (Schmitt Trigger in serial programming mode), interrupt-on-change, and serial programming clock."       },       {         "number": "28",         "name": "RB7",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin and serial programming data (Schmitt Trigger in serial programming mode)."+        "description": "PORTB bit 7 bi-directional I/O with TTL/Schmitt Trigger input (Schmitt Trigger in serial programming mode), interrupt-on-change, and serial programming data."       }     ],     "provenance": {@@ -230,11 +229,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The SOIC pin numbers come from the SOIC column of Table 3-1 (PIC16C63A/73B pinout, page 11). The SOI; The datasheet is a family datasheet covering PIC16C63A/65B/73B/74B. The PIC16C73B-20/SO marking exam; Pins 8 and 19 are both VSS and pin 20 is VDD, as listed in Table 3-1. The pin types are KiCad classe"+          "extractor flagged: The SOIC-28 package outline drawing with 300 mil dimensions is not in the supplied text; only the 28; Pin 1 MCLR/VPP is listed as I/P in the datasheet; mapped to KiCad 'input' because its primary functi; Pin 9 OSC1/CLKIN and pin 10 OSC2/CLKOUT are classed input/output from the table's I/O column; the da"         ],-        "pages_sent": 18,-        "cost_usd": 0.1219,-        "at": "2026-11-12T05:00:48"+        "pages_sent": 19,+        "cost_usd": 0.1282,+        "at": "2026-11-17T18:07:19"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/9172e2c35f8fada0823865c7d5ceabd3.pdf",@@ -271,7 +270,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -289,8 +288,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "0101556ad169063643b76bea3f8790acdec05ac7190ebbdb044330b68e12904d",-        "checked": "2026-11-12",+        "sha256": "361d2b6ef5d5eb6b916aee43c96ef072229d8f3e53bb068c9f2cd05ca1907763",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -992,10 +991,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic16c73b-20-so-hero.glb",-    "pic16c73b-20-so-hero.overlay.json",-    "pic16c73b-20-so-etched.glb"+    "pic16c73b-20-so-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic16c73b-20-so-hero.overlay.json+703−698
@@ -1,700 +1,705 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "PIC16C73B-20/SO",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 28,-      "span_mm": 17.11,-      "dash_mm": 0.4278,-      "gap_mm": 0.2567,-      "pad_stroke_mm": 0.09-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 28,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 1.369,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -5.15,-      5.15,-      -8.461,-      8.461-    ],-    "pads_bbox_mm": [-      -5.675,-      5.675,-      -8.555,-      8.555-    ],-    "seating_z_mm": 0.001-  },-  "sources": {-    "glb": "pic16c73b-20-so-etched.glb",-    "glb_sha256": "1dca7cf00dfb191c2a9a982a4ea237ac84db26cf3808ab0528a796c9e0e5ffa9",-    "footprint": "pic16c73b-20-so.kicad_mod",-    "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519",-    "pins": "page.json component.pins",-    "pins_sha256": "e44bea1708018a5d8a8fd9b6b02c7dc2ad1a0dd6dbd2c08ea9f483581dd6af5c"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "MCLR/VPP",-      "x": -5.825,-      "y": -8.255,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "RA0/AN0",-      "x": -5.825,-      "y": -6.985,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "RA1/AN1",-      "x": -5.825,-      "y": -5.715,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "RA2/AN2",-      "x": -5.825,-      "y": -4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "RA3/AN3/VREF",-      "x": -5.825,-      "y": -3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "RA4/T0CKI",-      "x": -5.825,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "RA5/SS/AN4",-      "x": -5.825,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "VSS",-      "x": -5.825,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "9",-      "text": "OSC1/CLKIN",-      "x": -5.825,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "10",-      "text": "OSC2/CLKOUT",-      "x": -5.825,-      "y": 3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "11",-      "text": "RC0/T1OSO/T1CKI",-      "x": -5.825,-      "y": 4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "12",-      "text": "RC1/T1OSI/CCP2",-      "x": -5.825,-      "y": 5.715,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "13",-      "text": "RC2/CCP1",-      "x": -5.825,-      "y": 6.985,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "14",-      "text": "RC3/SCK/SCL",-      "x": -5.825,-      "y": 8.255,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "15",-      "text": "RC4/SDI/SDA",-      "x": 5.825,-      "y": 8.255,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "16",-      "text": "RC5/SDO",-      "x": 5.825,-      "y": 6.985,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "17",-      "text": "RC6/TX/CK",-      "x": 5.825,-      "y": 5.715,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "18",-      "text": "RC7/RX/DT",-      "x": 5.825,-      "y": 4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "19",-      "text": "VSS",-      "x": 5.825,-      "y": 3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "20",-      "text": "VDD",-      "x": 5.825,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "21",-      "text": "RB0/INT",-      "x": 5.825,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "22",-      "text": "RB1",-      "x": 5.825,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "23",-      "text": "RB2",-      "x": 5.825,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "24",-      "text": "RB3",-      "x": 5.825,-      "y": -3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "25",-      "text": "RB4",-      "x": 5.825,-      "y": -4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "26",-      "text": "RB5",-      "x": 5.825,-      "y": -5.715,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "27",-      "text": "RB6",-      "x": 5.825,-      "y": -6.985,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "28",-      "text": "RB7",-      "x": 5.825,-      "y": -8.255,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+ "spec": "adom-hero 1.4",+ "mpn": "PIC16C73B-20",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 28,+   "span_mm": 17.11,+   "dash_mm": 0.4278,+   "gap_mm": 0.2567,+   "pad_stroke_mm": 0.09+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 28,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 1.369,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -5.15,+   5.15,+   -8.461,+   8.461   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -8.255-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        8.255-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        8.255-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "19",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "20",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "21",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "22",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "23",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "24",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "25",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "26",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "27",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -6.985-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "28",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -8.255-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "pads_bbox_mm": [+   -5.675,+   5.675,+   -8.555,+   8.555+  ],+  "seating_z_mm": 0.001+ },+ "sources": {+  "glb": "pic16c73b-20-so-etched.glb",+  "glb_sha256": "1dca7cf00dfb191c2a9a982a4ea237ac84db26cf3808ab0528a796c9e0e5ffa9",+  "footprint": "pic16c73b-20-so.kicad_mod",+  "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519",+  "pins": "page.json component.pins",+  "pins_sha256": "e44bea1708018a5d8a8fd9b6b02c7dc2ad1a0dd6dbd2c08ea9f483581dd6af5c"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "MCLR/VPP",+   "x": -5.825,+   "y": -8.255,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "RA0/AN0",+   "x": -5.825,+   "y": -6.985,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "RA1/AN1",+   "x": -5.825,+   "y": -5.715,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "RA2/AN2",+   "x": -5.825,+   "y": -4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "RA3/AN3/VREF",+   "x": -5.825,+   "y": -3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "RA4/T0CKI",+   "x": -5.825,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "RA5/SS/AN4",+   "x": -5.825,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "VSS",+   "x": -5.825,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "9",+   "text": "OSC1/CLKIN",+   "x": -5.825,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "10",+   "text": "OSC2/CLKOUT",+   "x": -5.825,+   "y": 3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "11",+   "text": "RC0/T1OSO/T1CKI",+   "x": -5.825,+   "y": 4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "12",+   "text": "RC1/T1OSI/CCP2",+   "x": -5.825,+   "y": 5.715,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "13",+   "text": "RC2/CCP1",+   "x": -5.825,+   "y": 6.985,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "14",+   "text": "RC3/SCK/SCL",+   "x": -5.825,+   "y": 8.255,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "15",+   "text": "RC4/SDI/SDA",+   "x": 5.825,+   "y": 8.255,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "16",+   "text": "RC5/SDO",+   "x": 5.825,+   "y": 6.985,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "17",+   "text": "RC6/TX/CK",+   "x": 5.825,+   "y": 5.715,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "18",+   "text": "RC7/RX/DT",+   "x": 5.825,+   "y": 4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "19",+   "text": "VSS",+   "x": 5.825,+   "y": 3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "20",+   "text": "VDD",+   "x": 5.825,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "21",+   "text": "RB0/INT",+   "x": 5.825,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "22",+   "text": "RB1",+   "x": 5.825,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "23",+   "text": "RB2",+   "x": 5.825,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "24",+   "text": "RB3",+   "x": 5.825,+   "y": -3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "25",+   "text": "RB4",+   "x": 5.825,+   "y": -4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "26",+   "text": "RB5",+   "x": 5.825,+   "y": -5.715,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "27",+   "text": "RB6",+   "x": 5.825,+   "y": -6.985,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "28",+   "text": "RB7",+   "x": 5.825,+   "y": -8.255,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -8.255+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    8.255+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    8.255+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "19",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "20",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "21",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "22",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "23",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "24",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "25",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "26",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "27",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -6.985+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "28",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -8.255+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
pic16c73b-20-so.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-28W_7.5x17.9mm_P1.27mm">   <description>SOIC-28W, 7.5 x 17.9 mm, 1.27 mm pitch. SOIC, 28 Pin</description>@@ -106,6 +106,7 @@ </packages> <symbols> <symbol name="PIC16C73B-20">+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-17.78" y1="17.78" x2="17.78" y2="17.78" width="0.254" layer="94"/>   <wire x1="17.78" y1="17.78" x2="17.78" y2="-20.32" width="0.254" layer="94"/>   <wire x1="17.78" y1="-20.32" x2="-17.78" y2="-20.32" width="0.254" layer="94"/>@@ -144,7 +145,7 @@ </symbols> <devicesets> <deviceset name="PIC16C73B-20" prefix="U">-  <description></description>+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="PIC16C73B-20" x="0" y="0"/>   </gates>@@ -180,7 +181,17 @@         <connect gate="G$1" pin="RC5/SDO" pad="16"/>         <connect gate="G$1" pin="RC4/SDI/SDA" pad="15"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="PIC16C73B-20/SO" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/9172e2c35f8fada0823865c7d5ceabd3.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic16c73b-20-so" constant="no"/>+          <attribute name="MOUSER_PN" value="579-PIC16C73B20SO" constant="no"/>+          <attribute name="DIGIKEY_PN" value="PIC16C73B-20/SO-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C646171" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>