main
History Download
Ray Initial commit: component/pga309aipwr 5843301

PGA309AIPWR

Texas Instruments · ADCs/DACs - Special Purpose · TSSOP-16

PGA309AIPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VEXC power_out Bridge sensor excitation output with range 0 to VSA−0.5V at IEXC=5mA and short-circuit current of 50mA.
2 GNDA power_in Analog ground, must be same as GNDD.
3 VSA power_in Analog voltage supply ranging from 2.7V to 5.5V, within 200mV of VSD.
4 VIN1 input Signal input voltage 1 with linear range 0.2V to VSA−1.5V and input bias current 0.1 to 1.5nA.
5 VIN2 input Signal input voltage 2 with linear range 0.2V to VSA−1.5V and input bias current 0.1 to 1.5nA.
6 VFB output VOUT feedback pin for over/under-scale limit circuitry with output voltage range 0.1V to VSA−0.1V.
7 VOUT output Analog output voltage of conditioned sensor with range 0.05V to VSA−0.1V at load resistance RL=10kΩ.
8 VSJ output Output amplifier summing junction for compensation and external gain setting resistors when driving capacitive loads greater than 100pF.
9 TEST input Test/external controller mode pin; pull to GNDD for normal operation.
10 VSD power_in Digital voltage supply ranging from 2.7V to 5.5V, within 200mV of VSA.
11 GNDD power_in Digital ground, must be same as GNDA.
12 PRG tri_state Single-wire UART-compatible programming interface with bit rates 4.8kbps to 38.4kbps, open-drain output.
13 SCL tri_state Two-wire clock interface for calibration at 1kHz to 400kHz, open-drain output.
14 SDA tri_state Two-wire data interface for calibration at 1kHz to 400kHz, open-drain output.
15 TEMPIN input External temperature signal input with programmable gain of 1, 2, 4, or 8 and voltage range −0.2V to VSA+0.2V.
16 REFIN/REFOUT bidirectional Reference input/output pin with selectable internal reference 2.5V or 4.096V (drift ±10 or ±7ppm/°C) or external reference input.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Data Acquisition
Pins 16

CAD (KiCad official)

  • Symbol: PGA309AIPWR
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: pga309aipwr-etched.step / pga309aipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pga309aipwr.step / pga309aipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 33b5c812f99c8c5c, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF