component
PGA309AIPWR
Public Made by Adomby adom
Texas Instruments ADCs/DACs - Special Purpose, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# PGA309AIPWR++**Texas Instruments** · ADCs/DACs - Special Purpose · TSSOP-16++PGA309AIPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VEXC | power_out | Bridge sensor excitation output with range 0 to VSA−0.5V at IEXC=5mA and short-circuit current of 50mA. |+| 2 | GNDA | power_in | Analog ground, must be same as GNDD. |+| 3 | VSA | power_in | Analog voltage supply ranging from 2.7V to 5.5V, within 200mV of VSD. |+| 4 | VIN1 | input | Signal input voltage 1 with linear range 0.2V to VSA−1.5V and input bias current 0.1 to 1.5nA. |+| 5 | VIN2 | input | Signal input voltage 2 with linear range 0.2V to VSA−1.5V and input bias current 0.1 to 1.5nA. |+| 6 | VFB | output | VOUT feedback pin for over/under-scale limit circuitry with output voltage range 0.1V to VSA−0.1V. |+| 7 | VOUT | output | Analog output voltage of conditioned sensor with range 0.05V to VSA−0.1V at load resistance RL=10kΩ. |+| 8 | VSJ | output | Output amplifier summing junction for compensation and external gain setting resistors when driving capacitive loads greater than 100pF. |+| 9 | TEST | input | Test/external controller mode pin; pull to GNDD for normal operation. |+| 10 | VSD | power_in | Digital voltage supply ranging from 2.7V to 5.5V, within 200mV of VSA. |+| 11 | GNDD | power_in | Digital ground, must be same as GNDA. |+| 12 | PRG | tri_state | Single-wire UART-compatible programming interface with bit rates 4.8kbps to 38.4kbps, open-drain output. |+| 13 | SCL | tri_state | Two-wire clock interface for calibration at 1kHz to 400kHz, open-drain output. |+| 14 | SDA | tri_state | Two-wire data interface for calibration at 1kHz to 400kHz, open-drain output. |+| 15 | TEMPIN | input | External temperature signal input with programmable gain of 1, 2, 4, or 8 and voltage range −0.2V to VSA+0.2V. |+| 16 | REFIN/REFOUT | bidirectional | Reference input/output pin with selectable internal reference 2.5V or 4.096V (drift ±10 or ±7ppm/°C) or external reference input. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Data Acquisition |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `PGA309AIPWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `pga309aipwr-etched.step` / `pga309aipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pga309aipwr.step` / `pga309aipwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/pga309) (26 pp, sha256 `33b5c812f99c8c5c`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pga309aipwr-datasheet.pdf)
page.jsonadded+189@@ -0,0 +1,189 @@+{+ "slug": "pga309aipwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments ADCs/DACs - Special Purpose, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "pga309aipwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "pga309aipwr.kicad_sym",+ "pga309aipwr.kicad_mod",+ "pga309aipwr.glb",+ "pga309aipwr.step",+ "pga309aipwr.lbr",+ "docs/hero.png",+ "docs/pga309aipwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "PGA309AIPWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Data Acquisition",+ "subcategory": "ADCs/DACs - Special Purpose",+ "datasheet": "https://www.ti.com/cn/lit/gpn/pga309",+ "parts": {+ "symbol": "pga309aipwr.kicad_sym",+ "footprint": "pga309aipwr.kicad_mod",+ "model_3d": "pga309aipwr-etched.glb",+ "model_3d_plain": "pga309aipwr.glb",+ "model_3d_step": "pga309aipwr-etched.step",+ "model_3d_step_plain": "pga309aipwr.step",+ "lbr": "pga309aipwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C16086"+ },+ "pins": [+ {+ "number": "1",+ "name": "VEXC",+ "type": "power_out",+ "description": "Bridge sensor excitation output with range 0 to VSA−0.5V at IEXC=5mA and short-circuit current of 50mA."+ },+ {+ "number": "2",+ "name": "GNDA",+ "type": "power_in",+ "description": "Analog ground, must be same as GNDD."+ },+ {+ "number": "3",+ "name": "VSA",+ "type": "power_in",+ "description": "Analog voltage supply ranging from 2.7V to 5.5V, within 200mV of VSD."+ },+ {+ "number": "4",+ "name": "VIN1",+ "type": "input",+ "description": "Signal input voltage 1 with linear range 0.2V to VSA−1.5V and input bias current 0.1 to 1.5nA."+ },+ {+ "number": "5",+ "name": "VIN2",+ "type": "input",+ "description": "Signal input voltage 2 with linear range 0.2V to VSA−1.5V and input bias current 0.1 to 1.5nA."+ },+ {+ "number": "6",+ "name": "VFB",+ "type": "output",+ "description": "VOUT feedback pin for over/under-scale limit circuitry with output voltage range 0.1V to VSA−0.1V."+ },+ {+ "number": "7",+ "name": "VOUT",+ "type": "output",+ "description": "Analog output voltage of conditioned sensor with range 0.05V to VSA−0.1V at load resistance RL=10kΩ."+ },+ {+ "number": "8",+ "name": "VSJ",+ "type": "output",+ "description": "Output amplifier summing junction for compensation and external gain setting resistors when driving capacitive loads greater than 100pF."+ },+ {+ "number": "9",+ "name": "TEST",+ "type": "input",+ "description": "Test/external controller mode pin; pull to GNDD for normal operation."+ },+ {+ "number": "10",+ "name": "VSD",+ "type": "power_in",+ "description": "Digital voltage supply ranging from 2.7V to 5.5V, within 200mV of VSA."+ },+ {+ "number": "11",+ "name": "GNDD",+ "type": "power_in",+ "description": "Digital ground, must be same as GNDA."+ },+ {+ "number": "12",+ "name": "PRG",+ "type": "tri_state",+ "description": "Single-wire UART-compatible programming interface with bit rates 4.8kbps to 38.4kbps, open-drain output."+ },+ {+ "number": "13",+ "name": "SCL",+ "type": "tri_state",+ "description": "Two-wire clock interface for calibration at 1kHz to 400kHz, open-drain output."+ },+ {+ "number": "14",+ "name": "SDA",+ "type": "tri_state",+ "description": "Two-wire data interface for calibration at 1kHz to 400kHz, open-drain output."+ },+ {+ "number": "15",+ "name": "TEMPIN",+ "type": "input",+ "description": "External temperature signal input with programmable gain of 1, 2, 4, or 8 and voltage range −0.2V to VSA+0.2V."+ },+ {+ "number": "16",+ "name": "REFIN/REFOUT",+ "type": "bidirectional",+ "description": "Reference input/output pin with selectable internal reference 2.5V or 4.096V (drift ±10 or ±7ppm/°C) or external reference input."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 26,+ "cost_usd": 0.3281,+ "at": "2026-09-22T09:08:36"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/pga309",+ "pages": 26,+ "sha256": "33b5c812f99c8c5c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}