main
Ray Publish 0.1.1 8502c7d
{
  "slug": "pcm4202dbr",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments ADCs/DACs - Special Purpose, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data acquisition",
    "pcm4202dbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pcm4202dbr.kicad_sym",
    "pcm4202dbr.kicad_mod",
    "pcm4202dbr.glb",
    "pcm4202dbr.step",
    "pcm4202dbr.lbr",
    "docs/hero.png",
    "docs/pcm4202dbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pcm4202dbr-etched.step",
    "pcm4202dbr-hero.glb",
    "pcm4202dbr-hero.overlay.json"
  ],
  "component": {
    "mpn": "PCM4202DBR",
    "manufacturer": "Texas Instruments",
    "package": "SSOP-28",
    "pin_count": 28,
    "category": "Data Acquisition",
    "subcategory": "ADCs/DACs - Special Purpose",
    "datasheet": "https://www.ti.com/cn/lit/gpn/pcm4202",
    "parts": {
      "symbol": "pcm4202dbr.kicad_sym",
      "footprint": "pcm4202dbr.kicad_mod",
      "model_3d": "pcm4202dbr-hero.glb",
      "model_3d_plain": "pcm4202dbr.glb",
      "model_3d_step": "pcm4202dbr-etched.step",
      "model_3d_step_plain": "pcm4202dbr.step",
      "lbr": "pcm4202dbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C524003",
      "digikey": "296-41379-2-ND",
      "mouser": "595-PCM4202DBR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T05:54:33Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-41379-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-PCM4202DBR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VREFL",
        "type": "output",
        "description": "Left channel voltage reference output; connect 0.1µF X7R ceramic and 33µF tantalum decoupling capacitors to AGNDL; unbuffered output, do not use to bias external circuitry."
      },
      {
        "number": "2",
        "name": "AGNDL",
        "type": "power_in",
        "description": "Left channel reference ground; connect to analog ground plane."
      },
      {
        "number": "3",
        "name": "VCOML",
        "type": "output",
        "description": "Left channel DC common-mode voltage output, 2.5V typical; use for biasing external input buffer circuitry with load greater than 1MΩ impedance or buffer with voltage follower."
      },
      {
        "number": "4",
        "name": "VINL+",
        "type": "input",
        "description": "Left channel non-inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance."
      },
      {
        "number": "5",
        "name": "VINL−",
        "type": "input",
        "description": "Left channel inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance."
      },
      {
        "number": "6",
        "name": "FMT0",
        "type": "input",
        "description": "Audio data format selection control pin; digital input for I2S, left-justified, or right-justified format selection."
      },
      {
        "number": "7",
        "name": "FMT1",
        "type": "input",
        "description": "Audio data format selection control pin; digital input for I2S, left-justified, or right-justified format selection."
      },
      {
        "number": "8",
        "name": "S/M",
        "type": "input",
        "description": "Audio serial port slave/master mode selection; 0 selects Master mode, 1 selects Slave mode."
      },
      {
        "number": "9",
        "name": "FS0",
        "type": "input",
        "description": "Sampling mode selection control input; used with FS1 and FS2 to configure PCM sampling rate or DSD output data rate."
      },
      {
        "number": "10",
        "name": "FS1",
        "type": "input",
        "description": "Sampling mode selection control input; used with FS0 and FS2 to configure PCM sampling rate or DSD output data rate."
      },
      {
        "number": "11",
        "name": "FS2",
        "type": "input",
        "description": "Sampling mode selection control input; used with FS0 and FS1 to configure PCM sampling rate or DSD output data rate."
      },
      {
        "number": "12",
        "name": "HPFD",
        "type": "input",
        "description": "High-pass filter disable control input; active high to disable digital high-pass filter for DC removal in PCM mode."
      },
      {
        "number": "13",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground; connect to digital power supply ground plane."
      },
      {
        "number": "14",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital power supply input, +3.3V nominal."
      },
      {
        "number": "15",
        "name": "DATA/DSDR",
        "type": "output",
        "description": "Audio serial port output for 24-bit linear PCM left and right channel data or right channel 1-bit DSD data."
      },
      {
        "number": "16",
        "name": "BCK/DSDL",
        "type": "bidirectional",
        "description": "Audio serial port bit clock input in slave mode, bit clock output in master mode; alternatively left channel DSD data output when in DSD mode."
      },
      {
        "number": "17",
        "name": "LRCK/DSDBCK",
        "type": "bidirectional",
        "description": "Audio serial port left/right clock input in slave mode, word clock output in master mode; alternatively DSD data clock output when in DSD mode."
      },
      {
        "number": "18",
        "name": "SCKI",
        "type": "input",
        "description": "System clock input; external clock required to derive modulator oversampling and digital subsystem clocks; frequency determines PCM sampling rate and DSD data rate."
      },
      {
        "number": "19",
        "name": "RST",
        "type": "input",
        "description": "Reset/power-down control input, active low with internal pull-up resistor; used for asynchronous reset and power-down mode operation."
      },
      {
        "number": "20",
        "name": "CLIPR",
        "type": "output",
        "description": "Right channel clipping flag output, active high; indicates output clipping has occurred in PCM output mode."
      },
      {
        "number": "21",
        "name": "CLIPL",
        "type": "output",
        "description": "Left channel clipping flag output, active high; indicates output clipping has occurred in PCM output mode."
      },
      {
        "number": "22",
        "name": "VCC",
        "type": "power_in",
        "description": "Analog power supply input, +5V nominal; required for analog signal path and delta-sigma modulator operation."
      },
      {
        "number": "23",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground; connect to analog power supply ground plane."
      },
      {
        "number": "24",
        "name": "VINR−",
        "type": "input",
        "description": "Right channel inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance."
      },
      {
        "number": "25",
        "name": "VINR+",
        "type": "input",
        "description": "Right channel non-inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance."
      },
      {
        "number": "26",
        "name": "VCOMR",
        "type": "output",
        "description": "Right channel DC common-mode voltage output, 2.5V typical; use for biasing external input buffer circuitry with load greater than 1MΩ impedance or buffer with voltage follower."
      },
      {
        "number": "27",
        "name": "AGNDR",
        "type": "power_in",
        "description": "Right channel reference ground; connect to analog ground plane."
      },
      {
        "number": "28",
        "name": "VREFR",
        "type": "output",
        "description": "Right channel voltage reference output; connect 0.1µF X7R ceramic and 33µF tantalum decoupling capacitors to AGNDR; unbuffered output, do not use to bias external circuitry."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 10,
        "cost_usd": 0.1153,
        "at": "2026-10-01T05:54:14"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/pcm4202",
        "pages": 32,
        "sha256": "1b228e85a19f451f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pcm4202dbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pcm4202dbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "08555645e944afef82586f260255ef5783b08aa1137ccefe8232c9ec516febe8",
        "checked": "2026-11-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "PCM4202DBR",
  "brief": "Texas Instruments ADCs/DACs - Special Purpose, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SSOP-28",
      "Category": "Data Acquisition",
      "Pins": "28"
    }
  },
  "discovery_triggers": [
    "pcm4202dbr"
  ],
  "discovery_pitch": "PCM4202DBR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}