main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pcm4202dbr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
viewers pcm4202dbr: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pcm4202dbr-etched.fit.json pcm4202dbr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
pcm4202dbr-etched.glb pcm4202dbr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
pcm4202dbr-etched.step pcm4202dbr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
pcm4202dbr-hero.glb pcm4202dbr: hero from the plain model · Ray
pcm4202dbr-hero.overlay.json pcm4202dbr: hero from the plain model · Ray
pcm4202dbr.glb Publish 0.1.0 · Ray
pcm4202dbr.kicad_mod Publish 0.1.0 · Ray
pcm4202dbr.kicad_sym Publish 0.1.0 · Ray
pcm4202dbr.lbr Publish 0.1.0 · Ray
pcm4202dbr.step Publish 0.1.0 · Ray
README.md Initial commit: component/pcm4202dbr · Ray

PCM4202DBR

Texas Instruments · ADCs/DACs - Special Purpose · SSOP-28

PCM4202DBR from Texas Instruments, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VREFL output Left channel voltage reference output; connect 0.1µF X7R ceramic and 33µF tantalum decoupling capacitors to AGNDL; unbuffered output, do not use to bias external circuitry.
2 AGNDL power_in Left channel reference ground; connect to analog ground plane.
3 VCOML output Left channel DC common-mode voltage output, 2.5V typical; use for biasing external input buffer circuitry with load greater than 1MΩ impedance or buffer with voltage follower.
4 VINL+ input Left channel non-inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance.
5 VINL− input Left channel inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance.
6 FMT0 input Audio data format selection control pin; digital input for I2S, left-justified, or right-justified format selection.
7 FMT1 input Audio data format selection control pin; digital input for I2S, left-justified, or right-justified format selection.
8 S/M input Audio serial port slave/master mode selection; 0 selects Master mode, 1 selects Slave mode.
9 FS0 input Sampling mode selection control input; used with FS1 and FS2 to configure PCM sampling rate or DSD output data rate.
10 FS1 input Sampling mode selection control input; used with FS0 and FS2 to configure PCM sampling rate or DSD output data rate.
11 FS2 input Sampling mode selection control input; used with FS0 and FS1 to configure PCM sampling rate or DSD output data rate.
12 HPFD input High-pass filter disable control input; active high to disable digital high-pass filter for DC removal in PCM mode.
13 DGND power_in Digital ground; connect to digital power supply ground plane.
14 VDD power_in Digital power supply input, +3.3V nominal.
15 DATA/DSDR output Audio serial port output for 24-bit linear PCM left and right channel data or right channel 1-bit DSD data.
16 BCK/DSDL bidirectional Audio serial port bit clock input in slave mode, bit clock output in master mode; alternatively left channel DSD data output when in DSD mode.
17 LRCK/DSDBCK bidirectional Audio serial port left/right clock input in slave mode, word clock output in master mode; alternatively DSD data clock output when in DSD mode.
18 SCKI input System clock input; external clock required to derive modulator oversampling and digital subsystem clocks; frequency determines PCM sampling rate and DSD data rate.
19 RST input Reset/power-down control input, active low with internal pull-up resistor; used for asynchronous reset and power-down mode operation.
20 CLIPR output Right channel clipping flag output, active high; indicates output clipping has occurred in PCM output mode.
21 CLIPL output Left channel clipping flag output, active high; indicates output clipping has occurred in PCM output mode.
22 VCC power_in Analog power supply input, +5V nominal; required for analog signal path and delta-sigma modulator operation.
23 AGND power_in Analog ground; connect to analog power supply ground plane.
24 VINR− input Right channel inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance.
25 VINR+ input Right channel non-inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance.
26 VCOMR output Right channel DC common-mode voltage output, 2.5V typical; use for biasing external input buffer circuitry with load greater than 1MΩ impedance or buffer with voltage follower.
27 AGNDR power_in Right channel reference ground; connect to analog ground plane.
28 VREFR output Right channel voltage reference output; connect 0.1µF X7R ceramic and 33µF tantalum decoupling capacitors to AGNDR; unbuffered output, do not use to bias external circuitry.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-28
Category Data Acquisition
Pins 28

CAD (KiCad official)

  • Symbol: PCM4202DBR
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28 (KiCad packages3D, STEP)
  • 3D model files: pcm4202dbr-etched.step / pcm4202dbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pcm4202dbr.step / pcm4202dbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 1b228e85a19f451f, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF