main
Ray Publish 0.1.0 96e9ca5
{
  "slug": "pcf8574am",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI I/O Expanders, SOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "communication interface chip-uart-485-232",
    "pcf8574am",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pcf8574am.kicad_sym",
    "pcf8574am.kicad_mod",
    "pcf8574am.glb",
    "pcf8574am.step",
    "pcf8574am.lbr",
    "docs/hero.png",
    "docs/pcf8574am-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pcf8574am-hero.glb",
    "pcf8574am-hero.overlay.json"
  ],
  "component": {
    "mpn": "PCF8574AM",
    "manufacturer": "HGSEMI",
    "package": "SOP-16-150mil",
    "pin_count": 16,
    "category": "Communication Interface Chip/UART/485/232",
    "subcategory": "I/O Expanders",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/4b90e43acbd9bf893744018942fdd643.pdf",
    "parts": {
      "symbol": "pcf8574am.kicad_sym",
      "footprint": "pcf8574am.kicad_mod",
      "model_3d": "pcf8574am-hero.glb",
      "model_3d_plain": "pcf8574am.glb",
      "model_3d_step": "pcf8574am-etched.step",
      "model_3d_step_plain": "pcf8574am.step",
      "lbr": "pcf8574am.lbr"
    },
    "distributor_links": {
      "lcsc": "C5310793"
    },
    "distributor_check": {
      "checked_at": "2026-11-20T22:12:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Address input 0 sets hardware slave address bit A0, allowing up to 8 PCF8574 devices (up to 16 with PCF8574A) on the bus."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Address input 1 sets hardware slave address bit A1, allowing up to 8 PCF8574 devices (up to 16 with PCF8574A) on the bus."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Address input 2 sets hardware slave address bit A2, allowing up to 8 PCF8574 devices (up to 16 with PCF8574A) on the bus."
      },
      {
        "number": "4",
        "name": "P0",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 0 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input."
      },
      {
        "number": "5",
        "name": "P1",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 1 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input."
      },
      {
        "number": "6",
        "name": "P2",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 2 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input."
      },
      {
        "number": "7",
        "name": "P3",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 3 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input."
      },
      {
        "number": "8",
        "name": "VSS",
        "type": "power_in",
        "description": "Supply ground, the 0 V reference for the 2.5 to 6 V supply range."
      },
      {
        "number": "9",
        "name": "P4",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 4 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input."
      },
      {
        "number": "10",
        "name": "P5",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 5 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input."
      },
      {
        "number": "11",
        "name": "P6",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 6 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input."
      },
      {
        "number": "12",
        "name": "P7",
        "type": "bidirectional",
        "description": "Quasi-bidirectional I/O 7 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input."
      },
      {
        "number": "13",
        "name": "INT",
        "type": "output",
        "description": "Open-drain interrupt output, active LOW, signals the microcontroller when input data on the ports changes; minimum IOL is 1.6 mA at VOL 0.4 V."
      },
      {
        "number": "14",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock line of the I2C-bus, which must be pulled up to the positive supply through a pull-up resistor; maximum fSCL is 100 kHz."
      },
      {
        "number": "15",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data line of the I2C-bus, which must be pulled up to the positive supply through a pull-up resistor; the data must remain stable during the HIGH period of the clock."
      },
      {
        "number": "16",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage of 2.5 to 6.0 V; the device resets the I2C logic when VDD falls below VPOR (2.4 V maximum)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet ordering table lists PCF8574AM/TR as SOP-16 (reel), and the SOP-16 pin numbering is sh"
        ],
        "pages_sent": 18,
        "cost_usd": 0.0202,
        "at": "2026-11-20T22:12:37"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/4b90e43acbd9bf893744018942fdd643.pdf",
        "pages": 18,
        "sha256": "b4f2128e4d380a5d",
        "source_tier": "lcsc",
        "citation": "HGSEMI datasheet, copy hosted by LCSC"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pcf8574am.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-11-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pcf8574am-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "690c54fd14a3e24988f6e18639272565dffcd01bccd1a6e31590f18515499c28",
        "checked": "2026-11-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}