main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pcf8574am: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
pcf8574am-etched.glb pcf8574am: factory component page (tier=lcsc) · Ray
pcf8574am-etched.step pcf8574am: factory component page (tier=lcsc) · Ray
pcf8574am-hero.glb pcf8574am: hero GLB from the etched model (keeps the MPN mark) · Ray
pcf8574am-hero.overlay.json pcf8574am: hero GLB from the etched model (keeps the MPN mark) · Ray
pcf8574am.glb Publish 0.1.0 · Ray
pcf8574am.kicad_mod Publish 0.1.0 · Ray
pcf8574am.kicad_sym Publish 0.1.0 · Ray
pcf8574am.lbr Publish 0.1.0 · Ray
pcf8574am.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 16 pins · Ray

PCF8574AM

HGSEMI · I/O Expanders · SOP-16-150mil

PCF8574AM from HGSEMI, in a SOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Address input 0 sets hardware slave address bit A0, allowing up to 8 PCF8574 devices (up to 16 with PCF8574A) on the bus.
2 A1 input Address input 1 sets hardware slave address bit A1, allowing up to 8 PCF8574 devices (up to 16 with PCF8574A) on the bus.
3 A2 input Address input 2 sets hardware slave address bit A2, allowing up to 8 PCF8574 devices (up to 16 with PCF8574A) on the bus.
4 P0 bidirectional Quasi-bidirectional I/O 0 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input.
5 P1 bidirectional Quasi-bidirectional I/O 1 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input.
6 P2 bidirectional Quasi-bidirectional I/O 2 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input.
7 P3 bidirectional Quasi-bidirectional I/O 3 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input.
8 VSS power_in Supply ground, the 0 V reference for the 2.5 to 6 V supply range.
9 P4 bidirectional Quasi-bidirectional I/O 4 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input.
10 P5 bidirectional Quasi-bidirectional I/O 5 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input.
11 P6 bidirectional Quasi-bidirectional I/O 6 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input.
12 P7 bidirectional Quasi-bidirectional I/O 7 can be used as input or output without a direction control signal; it powers up HIGH and should be HIGH before being used as an input.
13 INT output Open-drain interrupt output, active LOW, signals the microcontroller when input data on the ports changes; minimum IOL is 1.6 mA at VOL 0.4 V.
14 SCL input Serial clock line of the I2C-bus, which must be pulled up to the positive supply through a pull-up resistor; maximum fSCL is 100 kHz.
15 SDA bidirectional Serial data line of the I2C-bus, which must be pulled up to the positive supply through a pull-up resistor; the data must remain stable during the HIGH period of the clock.
16 VDD power_in Supply voltage of 2.5 to 6.0 V; the device resets the I2C logic when VDD falls below VPOR (2.4 V maximum).

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-16-150mil
Category Communication Interface Chip/UART/485/232
Pins 16

CAD (KiCad official)

  • Symbol: PCF8574AM
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: pcf8574am-etched.step / pcf8574am-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pcf8574am.step / pcf8574am.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet, copy hosted by LCSC (18 pp, sha256 b4f2128e4d380a5d, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF