main
Ray Publish 0.1.1 090285e
{
  "schema_version": 1,
  "type": "component",
  "slug": "pca9543adr",
  "title": "PCA9543ADR",
  "brief": "Texas Instruments Analog Switches - Special Purpose, SOIC-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "pca9543adr"
  ],
  "component": {
    "mpn": "PCA9543ADR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-14",
    "pin_count": 14,
    "category": "Interface",
    "subcategory": "Analog Switches - Special Purpose",
    "datasheet": "https://www.ti.com/lit/ds/symlink/pca9543a.pdf",
    "parts": {
      "symbol": "pca9543adr.kicad_sym",
      "footprint": "pca9543adr.kicad_mod",
      "model_3d": "pca9543adr-hero.glb",
      "model_3d_plain": "pca9543adr.glb",
      "model_3d_step": "pca9543adr-etched.step",
      "model_3d_step_plain": "pca9543adr.step",
      "lbr": "pca9543adr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Hardware I2C slave address input bit 0. Tie directly to VCC or GND to select one of four possible device addresses on the upstream I2C bus."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Hardware I2C slave address input bit 1. Tie directly to VCC or GND to select one of four possible device addresses on the upstream I2C bus."
      },
      {
        "number": "3",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset input. A low pulse (min 4 ns) resets the I2C state machine and deselects both downstream channels. Connect to VCC or VDPUM through a pull-up resistor if not used."
      },
      {
        "number": "4",
        "name": "INT0",
        "type": "input",
        "description": "Active-low interrupt input from downstream channel 0. Connect to VDPU0 through a pull-up resistor. ANDed with INT1 to drive the INT output."
      },
      {
        "number": "5",
        "name": "SD0",
        "type": "bidirectional",
        "description": "Downstream channel 0 serial data line. Bidirectional open-drain pass-gate connection to SDA when channel 0 is selected. Requires an external pull-up to VDPU0."
      },
      {
        "number": "6",
        "name": "SC0",
        "type": "bidirectional",
        "description": "Downstream channel 0 serial clock line. Bidirectional open-drain pass-gate connection to SCL when channel 0 is selected. Requires an external pull-up to VDPU0."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device. 0 V."
      },
      {
        "number": "8",
        "name": "INT1",
        "type": "input",
        "description": "Active-low interrupt input from downstream channel 1. Connect to VDPU1 through a pull-up resistor. ANDed with INT0 to drive the INT output."
      },
      {
        "number": "9",
        "name": "SD1",
        "type": "bidirectional",
        "description": "Downstream channel 1 serial data line. Bidirectional open-drain pass-gate connection to SDA when channel 1 is selected. Requires an external pull-up to VDPU1."
      },
      {
        "number": "10",
        "name": "SC1",
        "type": "bidirectional",
        "description": "Downstream channel 1 serial clock line. Bidirectional open-drain pass-gate connection to SCL when channel 1 is selected. Requires an external pull-up to VDPU1."
      },
      {
        "number": "11",
        "name": "INT",
        "type": "output",
        "description": "Active-low interrupt output (open-drain) to the upstream I2C master. Asserted low when either INT0 or INT1 is asserted. Connect to VDPUM through a pull-up resistor. IOL up to 3 mA at VOL = 0.4 V."
      },
      {
        "number": "12",
        "name": "SCL",
        "type": "bidirectional",
        "description": "Upstream I2C serial clock line from the master. Open-drain; supports 0 to 400 kHz operation. Connect to VDPUM through a pull-up resistor."
      },
      {
        "number": "13",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Upstream I2C serial data line to/from the master. Open-drain, 5.5 V tolerant. Connect to VDPUM through a pull-up resistor."
      },
      {
        "number": "14",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage. Operating range 2.3 V to 5.5 V. VCC also sets the maximum pass-gate voltage for downstream channels, enabling level translation between mixed-voltage I2C buses."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/pca9543a.pdf",
        "pages": 34,
        "sha256": "669f202b834328fd",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pca9543adr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          8.7,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pca9543adr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          8.7,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4a564fbe066fa5e0359acd2ab1be4145d28689c30dd6e35e0bd6f6c7f4a50def",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-14",
      "Category": "Interface",
      "Pins": "14"
    }
  },
  "variants": [
    {
      "mpn": "PCA9543ADR",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9543ADRD",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9543ADRPWR",
      "kind": "packaging"
    },
    {
      "mpn": "PCA9543ADRPW",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "pca9543adr"
  ],
  "discovery_pitch": "PCA9543ADR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pca9543adr.kicad_sym",
    "pca9543adr.kicad_mod",
    "pca9543adr.glb",
    "pca9543adr.step",
    "pca9543adr.lbr",
    "docs/hero.png",
    "docs/pca9543adr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pca9543adr-etched.step",
    "pca9543adr-hero.glb",
    "pca9543adr-hero.overlay.json"
  ],
  "visibility": "public",
  "updated_at": "2026-09-25T04:09:04.296Z",
  "description": "Texas Instruments Analog Switches - Special Purpose, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}