← Commit history

Publish 0.1.1

Ray ·090285e692 · ·parent f035e1d
4 files changed +589−11
package.json+187−4
@@ -1,6 +1,6 @@ {   "slug": "pca9543adr",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Texas Instruments Analog Switches - Special Purpose, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -24,6 +24,189 @@     "docs/hero.png",     "docs/pca9543adr-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "pca9543adr-etched.step",+    "pca9543adr-hero.glb",+    "pca9543adr-hero.overlay.json"+  ],+  "component": {+    "mpn": "PCA9543ADR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-14",+    "pin_count": 14,+    "category": "Interface",+    "subcategory": "Analog Switches - Special Purpose",+    "datasheet": "https://www.ti.com/lit/ds/symlink/pca9543a.pdf",+    "parts": {+      "symbol": "pca9543adr.kicad_sym",+      "footprint": "pca9543adr.kicad_mod",+      "model_3d": "pca9543adr-hero.glb",+      "model_3d_plain": "pca9543adr.glb",+      "model_3d_step": "pca9543adr-etched.step",+      "model_3d_step_plain": "pca9543adr.step",+      "lbr": "pca9543adr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "A0",+        "type": "input",+        "description": "Hardware I2C slave address input bit 0. Tie directly to VCC or GND to select one of four possible device addresses on the upstream I2C bus."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "input",+        "description": "Hardware I2C slave address input bit 1. Tie directly to VCC or GND to select one of four possible device addresses on the upstream I2C bus."+      },+      {+        "number": "3",+        "name": "RESET",+        "type": "input",+        "description": "Active-low reset input. A low pulse (min 4 ns) resets the I2C state machine and deselects both downstream channels. Connect to VCC or VDPUM through a pull-up resistor if not used."+      },+      {+        "number": "4",+        "name": "INT0",+        "type": "input",+        "description": "Active-low interrupt input from downstream channel 0. Connect to VDPU0 through a pull-up resistor. ANDed with INT1 to drive the INT output."+      },+      {+        "number": "5",+        "name": "SD0",+        "type": "bidirectional",+        "description": "Downstream channel 0 serial data line. Bidirectional open-drain pass-gate connection to SDA when channel 0 is selected. Requires an external pull-up to VDPU0."+      },+      {+        "number": "6",+        "name": "SC0",+        "type": "bidirectional",+        "description": "Downstream channel 0 serial clock line. Bidirectional open-drain pass-gate connection to SCL when channel 0 is selected. Requires an external pull-up to VDPU0."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device. 0 V."+      },+      {+        "number": "8",+        "name": "INT1",+        "type": "input",+        "description": "Active-low interrupt input from downstream channel 1. Connect to VDPU1 through a pull-up resistor. ANDed with INT0 to drive the INT output."+      },+      {+        "number": "9",+        "name": "SD1",+        "type": "bidirectional",+        "description": "Downstream channel 1 serial data line. Bidirectional open-drain pass-gate connection to SDA when channel 1 is selected. Requires an external pull-up to VDPU1."+      },+      {+        "number": "10",+        "name": "SC1",+        "type": "bidirectional",+        "description": "Downstream channel 1 serial clock line. Bidirectional open-drain pass-gate connection to SCL when channel 1 is selected. Requires an external pull-up to VDPU1."+      },+      {+        "number": "11",+        "name": "INT",+        "type": "output",+        "description": "Active-low interrupt output (open-drain) to the upstream I2C master. Asserted low when either INT0 or INT1 is asserted. Connect to VDPUM through a pull-up resistor. IOL up to 3 mA at VOL = 0.4 V."+      },+      {+        "number": "12",+        "name": "SCL",+        "type": "bidirectional",+        "description": "Upstream I2C serial clock line from the master. Open-drain; supports 0 to 400 kHz operation. Connect to VDPUM through a pull-up resistor."+      },+      {+        "number": "13",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Upstream I2C serial data line to/from the master. Open-drain, 5.5 V tolerant. Connect to VDPUM through a pull-up resistor."+      },+      {+        "number": "14",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage. Operating range 2.3 V to 5.5 V. VCC also sets the maximum pass-gate voltage for downstream channels, enabling level translation between mixed-voltage I2C buses."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/pca9543a.pdf",+        "pages": 34,+        "sha256": "669f202b834328fd",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "pca9543adr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6,+          8.7,+          1.75+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "pca9543adr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6,+          8.7,+          1.75+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "4a564fbe066fa5e0359acd2ab1be4145d28689c30dd6e35e0bd6f6c7f4a50def",+        "checked": "2026-10-26",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "title": "PCA9543ADR",+  "brief": "Texas Instruments Analog Switches - Special Purpose, SOIC-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "SOIC-14",+      "Category": "Interface",+      "Pins": "14"+    }+  },+  "discovery_triggers": [+    "pca9543adr"+  ],+  "discovery_pitch": "PCA9543ADR (Texas Instruments) component page with datasheet-verified CAD.",+  "visibility": "public"+}
page.json+10−7
@@ -4,7 +4,7 @@   "slug": "pca9543adr",   "title": "PCA9543ADR",   "brief": "Texas Instruments Analog Switches - Special Purpose, SOIC-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -232,10 +232,13 @@     "docs/hero.png",     "docs/pca9543adr-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "pca9543adr-etched.step",+    "pca9543adr-hero.glb",+    "pca9543adr-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },-  "updated_at": "2026-09-25T04:09:04.296Z"-}+  "visibility": "public",+  "updated_at": "2026-09-25T04:09:04.296Z",+  "description": "Texas Instruments Analog Switches - Special Purpose, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
pca9543adr-hero.glbadded
⋯ 1 unchanged line ⋯
pca9543adr-hero.overlay.jsonadded+392
@@ -0,0 +1,392 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "PCA9543ADR",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 14,+      "span_mm": 8.22,+      "dash_mm": 0.2055,+      "gap_mm": 0.1233,+      "pad_stroke_mm": 0.0493+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 14,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.658,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.0,+      3.0,+      -4.015,+      4.015+    ],+    "pads_bbox_mm": [+      -3.45,+      3.45,+      -4.11,+      4.11+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "pca9543adr-etched.glb",+    "glb_sha256": "abe4325feee3a7b15dfae8c59eed1913e9135fe9781d4ca1d662eacf81205a8c",+    "footprint": "pca9543adr.kicad_mod",+    "footprint_sha256": "a885b619b22880c9559522d2bf865b059d80453b95a98defc9e6ceef284da1fc",+    "pins": "page.json component.pins",+    "pins_sha256": "3cfbd4475f0e92908f866b77f65cf718d93aa7883edccb3983ae4006a24d0963"+  },+  "generator": "adom-wiki 1.8.31 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "A0",+      "x": -3.6,+      "y": -3.81,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "A1",+      "x": -3.6,+      "y": -2.54,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "RESET",+      "x": -3.6,+      "y": -1.27,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "INT0",+      "x": -3.6,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "SD0",+      "x": -3.6,+      "y": 1.27,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "SC0",+      "x": -3.6,+      "y": 2.54,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "GND",+      "x": -3.6,+      "y": 3.81,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "INT1",+      "x": 3.6,+      "y": 3.81,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "9",+      "text": "SD1",+      "x": 3.6,+      "y": 2.54,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "10",+      "text": "SC1",+      "x": 3.6,+      "y": 1.27,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "11",+      "text": "INT",+      "x": 3.6,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "12",+      "text": "SCL",+      "x": 3.6,+      "y": -1.27,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "13",+      "text": "SDA",+      "x": 3.6,+      "y": -2.54,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "14",+      "text": "VCC",+      "x": 3.6,+      "y": -3.81,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -3.81+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -2.54+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -1.27+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        0.0+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        1.27+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        2.54+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        3.81+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        3.81+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        2.54+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        1.27+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        0.0+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -1.27+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -2.54+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -3.81+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    }+  ]+}