main
Ray
Publish 0.1.1
8de37dc
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164
{
"slug": "oc5800l",
"version": "0.1.1",
"type": "component",
"description": "OCX DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"oc5800l"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"oc5800l.kicad_sym",
"oc5800l.kicad_mod",
"oc5800l.glb",
"oc5800l.step",
"oc5800l.lbr",
"docs/hero.png",
"docs/oc5800l-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"oc5800l-etched.step",
"oc5800l-etched.glb"
],
"visibility": "public",
"author": {
"name": "Ray"
},
"component": {
"mpn": "OC5800L",
"manufacturer": "OCX",
"package": "SOP-8",
"pin_count": 9,
"category": "DC-DC Converters",
"parts": {
"symbol": "oc5800l.kicad_sym",
"footprint": "oc5800l.kicad_mod",
"model_3d": "oc5800l-etched.glb",
"model_3d_plain": "oc5800l.glb",
"model_3d_step": "oc5800l-etched.step",
"model_3d_step_plain": "oc5800l.step",
"lbr": "oc5800l.lbr"
},
"pins": [
{
"number": "1",
"name": "VIN",
"type": "power_in",
"description": "Drain of the internal 100V/5A power MOSFET; connect to the input power supply (8V-90V, absolute max 100V). The exposed thermal pad is internally tied to this pin."
},
{
"number": "2",
"name": "VDD",
"type": "power_in",
"description": "Chip bias supply input. Internally clamped at ~33V (I_VDD < 10mA); UVLO rising threshold 4.5V, falling 3V. Typically fed from VIN through a series resistor and a 12V Zener clamp."
},
{
"number": "3",
"name": "FB1",
"type": "input",
"description": "Positive-side output-voltage feedback sense pin. With FB2 forms the CV feedback loop; regulated (FB1-FB2) differential voltage is typically 397 mV. Absolute max -0.3 to 6 V."
},
{
"number": "4",
"name": "FB2",
"type": "input",
"description": "Negative-side output-voltage feedback sense pin. Paired with FB1 in the resistor-divider network that sets VOUT = ((R3+R1)/R1)*VFB. Absolute max -0.3 to 6 V."
},
{
"number": "5",
"name": "VCC",
"type": "power_out",
"description": "Internal 5V LDO output (typ. 5.5 V); connect a decoupling capacitor (typ. 4.7 µF) to GND. Absolute max -0.3 to 6 V; not intended to drive external loads."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "Chip ground reference for all internal circuitry and feedback resistor networks."
},
{
"number": "7",
"name": "VSEN",
"type": "input",
"description": "Inductor current sense input. A sense resistor between VSEN and GND sets the maximum output current: IOUT_MAX = VCS/R5, where VCS typ. 150 mV (145-155 mV). Also used for cycle-by-cycle current limit (VCS_LMT ≈ 300 mV). Absolute max -0.3 to 6 V."
},
{
"number": "8",
"name": "VSEND",
"type": "output",
"description": "Source of the internal power MOSFET (switch node). Connects to the external freewheeling Schottky (e.g. SS510) and to the buck inductor. Absolute max -0.3 to 6 V referenced per datasheet (see notes)."
},
{
"number": "EP",
"name": "EP/Thermal Pad",
"type": "power_in",
"description": "Exposed thermal pad on the bottom of the ESOP-8 package. Internally connected to VIN (pin 1); solder to the VIN copper plane for heat dissipation. Package max dissipation P_ESOP8 = 1 W.",
"thermal_pad": true
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "oc5800l.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "oc5800l-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "57fd9a15f535488f62aa72e6323f15ee6c327682dbfb60f397de87614fe7d5b7",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"org": "adom"
}